Mazda X-5. Manual — part 116
ENTERTAINMENT
09–20–7
09–20
Button and switch Location
End Of Sie
8
7
5
4
3
6
1
2
9
10
15
16
14
13
11
12
E5U920ZW5110
No.
Type A
Type B
1
FM/AM button
FM 1/2 button
2
SAT button
AM button
3
CD button
4
MEDIA button
5
POWER/VOLUME
button
AUDIO CONT/TUNE/
TEXT button
6
AUDIO CONT/TUNE/
TEXT button
POWER/VOLUME
button
7
Preset button 1
8
Preset button 2
9
Preset button 3
10
Preset button 4
11
Preset button 5
12
Preset button 6
13
SEEK switch
Fast-forward/Reverse
switch
14
CLOCK switch
15
SCAN/AUTO-M switch
16
Fast-forward/Reverse
switch
SEEK switch
No.
Type A
Type B
ENTERTAINMENT
09–20–8
AUTO LEVEL CONTROL (ALC) FUNCTION [WITHOUT BOSE]
E5U092066900N03
• Adjusts the audio volume so that the sound is balanced against wind and road noise while driving.
End Of Sie
AUTO LEVEL CONTROL (ALC) OPERATION [WITHOUT BOSE]
E5U092066900N08
• The audio unit changes the volume automatically based on the vehicle speed signal sent from the instrument
cluster.
.
• The ALC function is divided into seven modes that can be used effectively to match the driving conditions.
End Of Sie
5
4
3
6
1
2
3
4
5
7
HIGHER VEHICLE SPEED
LOWER VEHICLE SPEED
2
1
E5U920ZS5106
1
Audio unit (base unit)
2
Vehicle speed signal
3
ALC circuit
4
Power amplifier
5
Speaker
6
Higher volume
7
Normal volume
Mode
Condition
ALC function cancelled
Convertible top close
Outside road noise low
Outside road noise slightly high
Outside road noise high
Convertible top open
Outside road noise low
Outside road noise slightly high
Outside road noise high
ENTERTAINMENT
09–20–9
09–20
AUDIOPILOT OUTLINE [WITH BOSE]
E5U092066900N06
• Measures the driving noise level inside the vehicle with a specialized microphone, and the amplifier adjusts the
volume in accordance with the degree of noise masking the music component. Due to this, passengers can
enjoy music at a constantly perceived volume level regardless of the noise level.
End Of Sie
AUDIOPILOT CONSTRUCTION/OPERATION [WITH BOSE]
E5U092066900N07
• A microphone is installed on the lower panel.
• The amplifier separates the sound inside the vehicle, measured with a microphone, into music and noise, and
compares the noise and music levels at each frequency. Then, volume compensation is performed for
frequency bands where the noise is determined to interfere with the music.
End Of Sie
ON-BOARD DIAGNOSTIC SYSTEM OUTLINE
E5U092066900N04
• The on-board diagnostic system has a self-diagnostic function and diagnostic assist function to help
technicians locate malfunctions.
End Of Sie
NOISE
MUSIC
MICROPHONE
AMPLIFIER
OUTPUT TO SPEAKERS
TIME
MUSIC
(SET VOLUME)
NOISE INTERFERENCE AREA
A
A
SEC. A
—
A
(COMPENSATION AT EACH FREQUENCY)
VOLUME
FREQUENCY
LOW
FREQUENCY
HIGH
FREQUENCY
MUSIC
COMPENSATED
VOLUME
FREQUENCY BAND REQUIRING COMPENSATION
ANALYSIS
COMPENSATION
VOLUME
NOISE
COMPENSATED
VOLUME
NOISE
E5U920ZS5004
ENTERTAINMENT
09–20–10
ON-BOARD DIAGNOSTIC SYSTEM FUNCTION
E5U092066900N05
Self-diagnostic Function
Malfunction detection function
• The malfunction detection section detects malfunctions occurring in the system.
Memory function
• The memory function detects a malfunction, changes it to a DTC, and stores it in the memory. The memory can
store a maximum of three DTCs. If another malfunction is detected when three DTCs are already stored, the
memory function clears the oldest DTC and stores the new one.
• Once a DTC is stored, it can only be cleared by the designated procedure; not by turning the ignition switch to
the LOCK position or disconnecting the negative battery cable. The procedure is mentioned in the Service
Section.
Display function
• When the self-diagnostic function is activated, the information display displays the DTC stored in the memory.
• The DTC consists of the following codes and numbers:
— Supplier code (indicates manufacturer)
— Part number (indicates malfunctioning part)
— Error code (indicates malfunction description)
• Refer to the Service Section for the display method.
1
Supplier code
2
Part number
3
Error code
Supplier code
Supplier name
1
SANYO Automedia
2
Panasonic
3
Clarion
4
Pioneer
Parts number
Parts name
03
CD player
05
CD changer (external)
06
CD changer (upper module)
07
MD player (lower module)
09
Base unit
10
MP3 applicable CD player
11
Sirius unit
21
Center panel
22
MP3 applicable CD changer
Error code
Malfunction description
01
Internal mechanism error
02
Servo mechanism error
03
Mechanism stuck
04
Tape malfunction
07
Disc reading error
08
Blank media
10
BUS line (communication line) error
17
Incorrect combination
18
Incorrect combination
19
Communication line
20
Insufficient power supply
21
Amplifier related circuit
22
Tuner error
3
1
2
E5U920ZS5201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст