Mazda MX-5 Miata / Grand Touring. Manual — part 63
Fig. 18: Identifying Adjusting Bolt Of SST
Courtesy of MAZDA MOTORS CORP.
2. Crimp the boot band (small-size) using the SST.
3. Verify that the crimp value B is within the specification.
If the crimp value B exceeds the specification, reduce opening length A of the SST and recrimp the
boot band.
If the crimp value B is less than the specification, increase opening length A of the SST and crimp
the new boot band.
Specification B
2.4-2.8 mm {0.095-0.110 in}
4. Verify that the boot band does not protrude from the boot band installation area.
If the boot band protrudes from the installation area, replace it with a new band and repeat Step 2
thru 4.
2008 Mazda MX-5 Miata Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - MX-5 Miata
Fig. 19: Crimping Boot Band
Courtesy of MAZDA MOTORS CORP.
5. Fill the boot with the repair kit grease.
6. Adjust opening length A of the SST to the specification.
Specification A
3.2 mm {0.13 in}
7. Crimp the boot band (large-size) using the SST.
8. Verify that the boot band crimp value B is within the specification.
If crimp value B exceeds the specification, reduce opening length A of the SST and recrimp the
boot band.
If the crimp value B is less than the specification, replace the boot band, increase opening length A
of the SST , and then recrimp the new boot band.
Specification B
2.4-2.8 mm {0.095-0.110 in}
2008 Mazda MX-5 Miata Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - MX-5 Miata
9. Verify that the boot band does not protrude from the boot band installation area.
If the boot band protrudes from the installation area, replace it with a new band and repeat Step 7
thru 9.
2008 Mazda MX-5 Miata Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - MX-5 Miata
2008 DRIVELINE/AXLES
Propeller Shaft - MX-5 Miata
PROPELLER SHAFT LOCATION INDEX
Fig. 1: Identifying Propeller Shaft
Courtesy of MAZDA MOTORS CORP.
PROPELLER SHAFT REMOVAL/INSTALLATION
1. Remove the member and the middle pipe.
(See EXHAUST SYSTEM REMOVAL/INSTALLATION [LF] .)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
2008 Mazda MX-5 Miata Grand Touring
2008 DRIVELINE/AXLES Propeller Shaft - MX-5 Miata
2008 Mazda MX-5 Miata Grand Touring
2008 DRIVELINE/AXLES Propeller Shaft - MX-5 Miata
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст