Mazda Millenia (2002 year). Instruction — part 9
6-22
Interior Comfort
Audio System
▼ Operating the Cassette Tape Player
Cassette tape insert
Insert the cassette tape into the slot, open
edge to the right and cassette tape will
begin play and "TAPE" will be displayed.
At the end of the cassette tape, the unit
automatically reverses cassette tape play.
When
is lit, the cassette tape’s top side
is playing. When
is lit, the bottom side
is on.
Playing
Press the cassette tape play button
(
) to start playing when a
cassette tape is in the unit. If there isn’t a
cassette tape in the unit when the cassette
tape play button (
) is pressed,
"NO TAPE" will flash on and off in
sequence.
Dolby noise reduction
When using a tape with Dolby NR*, push
the Dolby NR button (
). The
symbol will be displayed. To play a tape
without Dolby NR, push the button once
again.
Display
APC button:
(next program)
(one being
played)
Cassette tape play button
Cassette tape eject button
Program button
Dolby NR button
Repeat button
Rewind
button
Fast-
forward
button
NOTE
When a metal tape is inserted, the
player will automatically compensate
for it and "MTL" will be displayed.
6-23
Interior Comfort
Audio System
* Noise reduction system manufactured
under license from Dolby Laboratories
Licensing Corporation.
Dolby and the double-D symbol
are
trademarks of Dolby Laboratories
Licensing Corporation.
Ejecting the cassette tape
Press the cassette tape eject button (
) to
eject the cassette tape.
Fast forward/Rewind
Press the fast-forward button (
) to
fast-forward.
Press the rewind button (
) to rewind.
To stop this operation and play the
cassette tape, press the button again.
Reversing
Press the program button (
) to
change cassette tape-playing direction.
Automatic program control (APC)
APC is used to find the beginning of
either the next program or the one being
played.
Press the APC button (
) to the
beginning of the next selection.
Press the APC button (
) to the
beginning of the one being played. To
stop this operation and play the cassette
tape, press the button again.
If APC detects 15 seconds of blank space
it will automatically advance the tape to
the next selection.
Repeat play
This operation makes it possible to listen
to a selection repeatedly.
Press the repeat button (
) during play.
The current selection playing will be
repeated ("RPT" will be displayed).
Press the repeat button (
) once again
to cancel repeat play.
NOTE
The cassette tape can be ejected when
the ignition switch is in the OFF
position.
NOTE
When the cassette tape ends during
fast forward or rewind, it automatically
stops and starts playing.
NOTE
When the cassette tape ends, the unit
automatically reverses play.
NOTE
APC may not operate properly if
• A tape was recorded at a low level.
• A tape has long, silent intervals.
• A tape is a live recording.
• A tape has very short intervals of
less than 3 seconds.
NOTE
RPT may not operate properly if
• A tape was recorded at a low level.
• A tape has long, silent intervals.
• A tape is a live recording.
• A tape has very short intervals of
less than 3 seconds.
6-24
Interior Comfort
Audio System
▼ Operating the Mini Disc (MD) Player
Inserting the MD
Insert the MD, label-side up with the
arrow pointed to the slot. The auto-
loading mechanism will set the MD and
begin play. There will be a short lapse
before play begins while the player reads
the digital signals on the MD.
Playing
Press the MD play button (
) to
start playing when a MD is in the unit.
Ejecting the MD
Press the MD eject button (
) to eject the
MD.
Fast-forward/Reverse
Press and hold the fast-forward button
(
) to advance through a track at high
speed.
Press and hold the reverse button (
)
to reverse through a track at high speed.
Track search
Press the track up button (
) once to
skip forward to the beginning of the next
track.
Press the track down button (
) once to
skip back to the beginning of the current
track.
Music scan
This feature helps to find a program by
playing about the first 10 seconds of each
track.
Press the scan button (
) during play
to start scan play operation (the track
number will flash).
Display
Track up
button
Track down
button
MD play button
Reverse button
Scan
button
Repeat button
MD display
MD slot
Random button
MD eject
button
Display
button
Fast-
forward
button
6-25
Interior Comfort
Audio System
Press the scan button (
) once again
to cancel scan play.
Repeat play
This feature makes it possible to listen to
a selection repeatedly.
Press the repeat button (
) during play.
The current selection will be repeated
("RPT" will be displayed).
Press the repeat button (
) once again
to cancel repeat play.
Random play
This feature allows the MD player to
randomly select the order of the songs.
Press the random button (
) during
play. The next selection will be randomly
selected ("RDM" will be displayed).
Press the random button (
) once again
to cancel random play.
Changing the MD display
To change the MD display during MD
play, press and hold the display button
(
) for about half a second to advance
through each of the following displays:
Long disc or song titles
When disc or song titles exceed 10 letters
or numerals, press the display button
(
) to display the remaining part of the
title.
NOTE
If the unit is left in scan, normal play
will resume where scan was selected.
Song title
No display
Disc title
NOTE
If there is no song or disc title recorded
on the MD, "NO TITLE" will be
displayed.
6-26
Interior Comfort
Audio System
▼ Operating the Compact Disc (CD) Player
Inserting the CD
Insert the CD into the slot, label-side up.
The auto-loading mechanism will set the
CD and begin play. There will be a short
lapse before play begins while the player
reads the digital signals on the CD.
The disc-in indicator will illuminate and
the track number will be displayed.
Playing
Press the CD play button (
) to start
playing when a CD is in the unit.
Ejecting the CD
Press the CD eject button (
) to eject the
CD.
Fast-forward/Reverse
Press and hold the fast-forward button
(
) to advance through a track at high
speed.
Press and hold the reverse button (
)
to reverse through a track at high speed.
Track search
Press the track up button (
) once to
skip forward to the beginning of the next
track.
Press the track down button (
) once to
skip back to the beginning of the current
track.
Music scan
This feature helps to find a program by
playing about the first 10 seconds of each
track.
Display
CD slot
Disc-in indicator
CD eject
button
CD play button
Random button
Repeat button
Scan
button
Fast-forward button
Reverse
button
Track up
button
Track down
button
6-27
Interior Comfort
Audio System
Press the scan button (
) during play
to start scan play operation (the track
number will flash).
Press the scan button (
) once again
to cancel scan play.
Repeat play
This feature makes it possible to listen to
a selection repeatedly.
Press the repeat button (
) during play.
The current selection will be repeated
("RPT" will be displayed).
Press the repeat button (
) once again
to cancel repeat play.
Random play
This feature allows the CD player to
randomly select the order of the songs.
Press the random button (
) during
play. The next selection will be randomly
selected ("RDM" will be displayed).
Press the random button (
) once again
to cancel random play.
NOTE
If the unit is left in scan, normal play
will resume where scan was selected.
6-28
Interior Comfort
Audio System
▼ Operating the In-Dash CD Changer
Inserting the CD
The CD must be label-side up when
inserting. The auto-loading mechanism
will set the CD and begin play. There will
be a short lapse before play begins while
the player reads the digital signals on the
CD.
The disc number and the track number
will be displayed.
Normal insertion
1. Press the load button (
).
2. When "In" is displayed, insert the CD.
Inserting CDs into desired tray number
1. Press and hold the load button (
)
for about 2 seconds until a beep is
heard.
2. Press the channel preset button for the
desired tray number within 5 seconds
after the beep is heard.
3. When "In" is displayed, insert the CD.
Display
CD slot
Disc-in indicator
CD eject
button
CD play button
Random button
Repeat button
Disc up button
Scan
button
Fast-forward button
Reverse
button
Track up
button
Track down
button
Disc down
button
Load button
Power/Volume knob
NOTE
A CD cannot be inserted while the
display reads "WAIT". A beeping
sound can be heard during this waiting
time. Simultaneously pressing the
power/volume knob and the load
button (
) for about 2 seconds will
turn this beeping sound ON or OFF.
NOTE
The CD cannot be inserted to the
desired tray number if the number is
already occupied.
6-29
Interior Comfort
Audio System
Multiple insertion
1. Press and hold the load button (
)
for about 2 seconds until a beep is
heard.
2. When "In" is displayed, insert the CD.
3. When "In" is displayed again, insert
the next CD.
Ejecting the CD
Normal ejection
1. Press the CD eject button (
). The
disc number and "OUT" will be
displayed.
2. Pull out the CD.
Ejecting CDs from desired tray number
1. Press and hold the CD eject button (
)
for about 2 seconds until a beep is
heard.
2. Press the channel preset button for the
desired CD number within 5 seconds
after the beep is heard.
3. Pull out the CD.
Multiple ejection
1. Press and hold the CD eject button (
)
for about 2 seconds until a beep is
heard.
2. Wait 5 seconds or press the CD eject
button (
) again within 5 seconds
after the beep is heard.
3. Pull out the CD, then the next CD will
be ejected.
Playing
Press the CD play button (
) to start
playing when a CD is in the unit.
Fast-forward/Reverse
Press and hold the fast-forward button
(
) to advance through a track at high
speed.
Press and hold the reverse button (
)
to reverse through a track at high speed.
Track search
Press the track up button (
) once to
skip forward to the beginning of the next
track.
Press the track down button (
) once to
skip back to the beginning of the current
track.
NOTE
The first-inserted CD will be played
automatically when:
• No CD is inserted within 15
seconds after "In" is displayed.
• The CD trays are full.
NOTE
When the CD is ejected during play,
the next CD will be played
automatically.
NOTE
• CDs will be ejected starting with the
one with the lowest number.
• All CDs in the tray will be ejected
continuously.
• CDs can be ejected when the
ignition switch is off. Press and hold
the CD eject button (
) for about 2
seconds and all CDs will eject.
6-30
Interior Comfort
Audio System
Disc search
Press the disc up button (
) to skip
forward to the beginning of the next CD.
Press the disc down button (
) to
skip back to the beginning of the previous
CD.
Music scan
This feature helps to find a program by
playing about the first 10 seconds of each
track.
Press the scan button (
) during play
to start scan play operation (the track
number will flash).
Press the scan button (
) once again
to cancel scan play.
Repeat play
This feature makes it possible to listen to
a selection repeatedly.
Press the repeat button (
) during play.
The current selection will be repeated
("RPT" will be displayed).
Press the repeat button (
) once again
to cancel repeat play.
Random play
This feature allows the CD player to
randomly select the order of the songs.
Press the random button (
) during
play. The next selection will be randomly
selected ("RDM" will be displayed).
Press the random button (
) once again
to cancel random play.
NOTE
If the unit is left in scan, normal play
will resume where scan was selected.
6-31
Interior Comfort
Audio System
▼ Error Indications
If you see an error indication on the display, find the cause in the chart. If you cannot clear
the error indication, take the vehicle to an Authorized Mazda Dealer.
Indication
Cause
Solution
CHECK MD
MD is inserted upside down
Insert the MD properly. If the error indication does not
disappear, consult an Authorized Mazda Dealer
CHECK MD
MD is defective
Insert another MD properly. If the error indication does
not disappear, consult an Authorized Mazda Dealer
CHECK CD
CD is inserted upside down
Insert the CD properly. If the error indication does not
disappear, consult an Authorized Mazda Dealer
CHECK CD
CD is defective
Check the CD for scratches or soiling
6-32
Interior Comfort
Audio System
▼ Adjusting the Volume
To increase the volume, press VOL UP
button.
To decrease the volume, press VOL
DOWN button.
▼ SELECT Switch
When listening to the radio
Press the switch to seek a higher
frequency automatically.
When playing a cassette tape
Press the switch, release, and it will
advance to the next selection.
When playing a CD
Press the switch to skip to the next track.
Audio Control Switch
Operation
Using Audio Control Panel:
Using the audio control panel while
driving is dangerous. Your attention
could be diverted and cause an
accident. When driving, always use
the audio system operation from the
audio control switch.
WARNING
6-33
Interior Comfort
Audio System
This CD player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the U.S. Department of
Health and Human Services.
Safety Certification
• This CD player should not be adjusted or repaired by anyone except qualified service
personnel.
If servicing is required, contact an Authorized Mazda dealer.
• Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser exposure. Never operate the CD player
with the top case of the unit removed.
• Changes or modifications not expressly approved by Mazda may void the user’s
authority to operate this equipment.
NOTE
For CD player section:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
CAUTION
6-34
Interior Comfort
Interior Equipment
When you need a sunvisor, lower it for use
in front or swing it to the side.
▼ Vanity Mirrors
To use the vanity mirror, lower the
sunvisor.
▼ Illuminated Entry System
When the switch is in the DOOR position,
the overhead light comes on for:
• about 30 seconds after the driver’s door
is unlocked and the ignition key is
removed.
• about 15 seconds after all doors are
closed.
• about 15 seconds after the key is
removed from the ignition.
The light also goes out when:
• the ignition switch is turned to the ON
position and all doors are closed.
• the driver’s door is locked.
Sunvisors
Interior Lights
NOTE
If any door is left opened, the light
goes out after about 5 minutes.
The light turns on again when the
ignition switch is turned to the ON
position, or when any door is opened
after all doors have been closed.
6-35
Interior Comfort
Interior Equipment
▼ Overhead light
▼ Map Lights
The map lights are switched on or off by
pressing the switches.
▼ Courtesy Lights
Turns on when any door is open.
OFF
Light off
DOOR
• Light on when any door is
open
• Light on or off when the
illuminated entry system is on
ON
Light on
ON
ON
DOOR
DOOR
OFF
OFF
Front
Rear
Courtesy light
6-36
Interior Comfort
The ignition switch must be in the ACC or
ON position.
To set the hour
Press the H (hour) button to change the
hour.
To set the minutes
Press the M (minute) button to change the
minutes.
Press the RESET button to clear minutes.
The clock will be set on the hour.
If the RESET button is pressed from
12:01 to 12:29, for example, the time will
be reset to 12:00. If pressed from
12:30 to 12:59, the time will be reset to
1:00.
(Example)
12:01—12:29
→12:00
12:30—12:59
→1:00
The ignition switch must be in the ACC or
ON position.
Press the lighter in and release it. When
ready for use, it automatically pops out.
Clock
NOTE
When the power is disconnected, the
time is automatically set at 1:00.
Lighter
• Don’t touch the metal part of the
lighter, you may burn yourself.
• Don’t hold the lighter in because it
will overheat.
• Don’t use the lighter socket for
plug-in accessories such as shavers
and coffee pots. They may damage
it or cause electrical failure. Use
only a genuine Mazda lighter or the
equivalent.
• If the lighter doesn’t pop out within
30 seconds, remove it to prevent
overheating.
CAUTION
6-37
Interior Comfort
Interior Equipment
▼ Front
To open, push the lower part of the cover.
To remove, push the cover forward and
pull out the ashtray.
To reinstall the ashtray, set it completely
back into its fixed position and close the
cover.
▼ Rear
To remove, open and push down on the
lock spring.
Ashtrays
Don’t use ashtrays for trash. You might
start a fire.
CAUTION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст