Mazda 5. Manual — part 63
BODY STRUCTURE [PANEL REPLACEMENT]
09–80B–15
09
End Of Sie
WHEEL APRON COMPONENT REMOVAL
DPE098053210B03
1. When removing the wheel apron component, the frame reinforcement may interfere and make removal difficult.
Therefore, drill 10 locations indicated by (A), then remove the frame reinforcement.
Note
• If the frame reinforcement is not damaged, do not dispose of it, as it can be reinstalled. If it is damaged
considerably, replace it with a new one.
6
1
1
3
4
6
WHEEL APRON PANEL (FRONT)
DPE0980B059
09–80B–16
BODY STRUCTURE [PANEL REPLACEMENT]
2. Grind the 2 locations indicated by (B) using a belt grinder from the inner side of the inner wheel housing.
3. Drill the remaining locations, then remove the wheel apron component.
2
3
5
1
4
(A)8
(A)2
3
6
2
FRAME REINFORCEMENT
WHEEL APRON COMPONENT
DPE0980B066
BODY STRUCTURE [PANEL REPLACEMENT]
09–80B–17
09
End Of Sie
WHEEL APRON COMPONENT INSTALLATION
DPE098053210B04
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
2
1
4
3
5
3
(B)2
DPE0980B068
09–80B–18
BODY STRUCTURE [PANEL REPLACEMENT]
2
3
5
1
4
4
6
6
2
WHEEL APRON COMPONENT
DPE0980B067
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст