Mazda CX-50 (2023 year). Manual in english — page 12
When Driving
Parking Sensor System
If the switch is pressed again, the parking sensor becomes operational and the
indicator light turns off.
1. Indicator light
Sound and viewing distance display
Informs the driver of the approximate distance from the vehicle to the obstruction
using warning beeps depending on the distance. If multiple obstructions are
detected at the same time, warning beeps are activated according to the distance to
the nearest obstruction.
Front*､Rear
Distance between vehicle and ob-
Display
struction
Beeper sound
With out 360°
With 360° view
Front
Rear
view monitor
monitor
Green
Approx.
Approx. 100―60.0
150―60.0 cm
cm (39.3―23.6 in)
(59.0―23.6 in)
Slow intermittent
sound
4-218 *Some models.
When Driving
Parking Sensor System
Distance between vehicle and ob-
Display
struction
Beeper sound
With out 360°
With 360° view
Front
Rear
view monitor
monitor
Yellow
Approx.
Approx.
60.0―45.0 cm
60.0―45.0 cm
(23.6―17.7 in)
(23.6―17.7 in)
Medium intermit-
tent sound
Amber
Approx.
Approx.
45.0―35.0 cm
45.0―35.0 cm
(17.7―13.7 in)
(17.7―13.7 in)
Fast intermittent
sound
Red
Within approx.
Within approx.
35.0 cm (13.7 in)
35.0 cm (13.7 in)
Continuous sound
4-219
When Driving
Parking Sensor System
Corner
Display
Distance between vehi-
With out 360° view
Beeper sound
cle and obstruction
With 360° view monitor
monitor
Yellow
Approx. 55.0―38.0 cm
(21.6―14.9 in)
Medium intermittent
sound
Amber
Approx. 38.0―25 cm
(14.9―9.8 in)
Fast intermittent
sound
Red
Within approx. 25 cm
(9.8 in)
Continuous sound
4-220
When Driving
Parking Sensor System
NOTE
The detection indicator can be switched between display and non-display and the
buzzer volume can be changed.
Refer to the Settings section in the Mazda Connect Owner's Manual.
(Vehicles with 360° View Monitor)
When the detection indicator is set to “Display”, even with the 360° view monitor
not displayed, if a front sensor or a front corner sensor detects an obstruction, the
360° view monitor switches automatically to display. When an obstruction is no
longer detected, the display switches to the display before the obstruction was
detected.
However, while the 360° view monitor is displayed, it continues to display no
matter if an obstruction is detected or not.
If an obstruction in the same area excluding the close area is detected
continuously for 6 seconds or longer, only the warning beeps stop activating.
(Detection is indicated) If the detection area changes to the close side, the
warning beeps resumes. (If the detection area changes to the far side, the warning
beeps remain off)
System Problem Indication
Indicator/Beep
How to check
If any of the problems indicated in the
A message indi-
There may be a problem
table occurs, the driver is notified of
cating a system
with the system. Have your
the problem depending on the type of
malfunction or
vehicle inspected by an Au-
system as shown.
sensor malfunc-
thorized Mazda Dealer as
tion is displayed.
soon as possible.
Detection Indicator
Remove any foreign matter
With out
With 360°
Solution
A message indi-
from the sensor area. If the
360° view
view mon-
cating that the
system does not recover,
monitor
itor
sensor is dirty is
have the vehicle inspected
The system may
displayed.
by an Authorized Mazda
have a mal-
Dealer.
Sys-
function. Have
Foreign matter may have
tem
the vehicle in-
A certain ob-
gotten on the sensor area
mal-
spected at an
struction detec-
corresponding to the detec-
func-
Authorized
tion indication is
tion indicator. If the system
tion
Mazda Dealer
continuously dis-
does not recover, have the
as soon as pos-
played.
vehicle inspected by an Au-
sible.
thorized Mazda Dealer.
The driver is notified of a problem
with the following indications.
4-221
Interior Features
5
Use of various features for ride comfort, including air-
conditioning system and audio system.
Climate Control System
5-2
Interior Equipment
5-38
Operating Tips
5-2
Sunvisors
5-38
Vent Operation
5-3
Interior Lights
5-39
Manual Type
5-6
Accessory Socket
5-41
Fully Automatic Type
5-10
USB Power Outlet*
5-43
Wireless Charger (Qi)*
5-43
Mazda Connect
5-15
Cup Holder
5-47
What is Mazda Connect ?
5-15
Bottle Holder
5-48
Mazda Connect Basic
Assist Grips
5-48
Operations
5-19
Rear Coat Hooks
5-49
Connected Service (If
Storage Compartments
5-49
applicable)
5-36
*Some models.
5-1
Interior Features
Climate Control System
required for the air conditioner
Operating Tips
maintenance.
For details, consult an Authorized
▼ Operating Tips
Mazda Dealer.
Operate the climate control system
with the engine running.
To prevent the battery from being
discharged, do not leave the fan
control switch on for a long period of
time with the ignition switched ON
when the engine is not running.
Clear all obstructions such as leaves,
snow and ice from the hood and the
air inlet in the cowl grille to improve
the system efficiency.
1.
Label
Use the climate control system to
defog the windows and dehumidify
the air.
The recirculate mode should be used
when driving through tunnels or
while in a traffic jam, or when you
would like to shut off outside air for
quick cooling of the interior.
Use the outside air position for
ventilation or windshield defrosting.
If the vehicle has been parked in
direct sunlight during hot weather,
open the windows to let warm air
escape, then run the climate control
system.
Run the air conditioner about 10
minutes at least once a month to
keep internal parts lubricated.
Have the air conditioner checked
before the weather gets hot. Lack of
refrigerant may make the air
conditioner less efficient.
The refrigerant specifications are
indicated on a label attached to the
inside of the engine compartment. If
the wrong type of refrigerant is used,
it could result in a serious
malfunction of the air conditioner.
Consult a professional, government
certified repairer for the inspection
or repair because a special device is
5-2
Interior Features
Climate Control System
NOTE
Vent Operation
The figure indicates the air vent on the
left side of the instrument cluster. The
▼ Adjusting the Vents
operation direction for the air vent on
the right side of the instrument cluster
Directing airflow
is symmetrical with the air vent on the
To adjust the direction of airflow, move
left side.
the adjustment knob.
NOTE
Airflow direction adjustment
When using the air conditioner
under humid ambient temperature
conditions, the system may blow fog
from the vents. This is not a sign of
trouble but a result of humid air
being suddenly cooled.
The air vents can be fully opened and
closed by operating the knob/dial.
Driver's Side Vents
1. Knob
Air vent open/close
Passenger's Side Vents
Air vent open/close
1. Knob
2. Open
3. Close
1. Knob
2. Open
5-3
Interior Features
Climate Control System
3. Close
Rear Vents*
Air vent open/close
Airflow direction adjustment
1. Knob
1. Dial
Center Vents
2. Open
3. Close
Air vent open/close
Airflow direction adjustment
1. Knob
2. Open
1. Knob
3. Close
Airflow direction adjustment
▼ Selecting the Airflow Mode
Dashboard Vents
1. Knob
5-4
*Some models.
Interior Features
Climate Control System
1. With rear vents
1. With rear vents
Dashboard and Floor Vents
Defroster Vents
1. With rear vents
NOTE
The location airflow exits the air vents
Floor Vents
and the airflow amount may change
depending on the open or close status
of the air vents.
1. With rear vents
Defroster and Floor Vents
5-5
Interior Features
Climate Control System
Manual Type
▼ Manual Type
1. A/C switch
2. Mode selector switch
3. Air intake selector switch
4. Fan control dial
5. Rear window defogger switch
6. Windshield defroster switch
7. Temperature control dial
▼ Control Switches
Fan control dial
Temperature control dial
This dial allows variable fan speeds.
The fan has seven speeds.
This dial controls temperature. Turn it
clockwise for hot and
Mode selector switches
counterclockwise for cold.
The desired airflow mode can be
MAX A/C
selected (page 5-4).
Fully turn the temperature control dial
A/C switch
counterclockwise for MAX A/C
Press the A/C switch to turn the air
(maximum cooling).
conditioner on. The indicator light on
NOTE
the switch will illuminate when the fan
control dial is in any position except
When the mode is set to or
with
OFF.
the fan control dial in a position other
than 0 and the temperature control
Press the switch once again to turn the
dial in the MAX A/C position, the air
air conditioner off.
intake selector switches to the
recirculated air position and the A/C
NOTE
turns on automatically.
The air conditioner may not function
If A/C is not desired, press the A/C
when the outside temperature
switch to turn it off.
approaches 0 °C (32 °F).
5-6
Interior Features
Climate Control System
Air intake selector switch
To exit the default recirculated air
position, press the air intake selector
This switch controls the source of air
switch to select the outside air
entering the vehicle.
position.
When the air intake selector switch is
Outside or recirculated air positions
set to the outside air position and
can be selected. Press the switch to
the outside temperature exceeds
select outside/recirculated air
about 73°F (23℃), the climate
positions.
control system may automatically
Recirculated air position (indicator
select the recirculated air position to
light illuminated)
improve the efficiency of the climate
control system.
Outside air is shut off. Air within the
vehicle is recirculated. Use this
Windshield defroster switch
position when going through tunnels,
Press the switch to defrost the
driving in congested traffic (high engine
windshield and front door windows.
exhaust areas), or when quick cooling
Refer to Windshield Defrosting and
is desired.
Defogging on page 5-8.
Outside air position (indicator light
Rear window defogger switch
turned off)
Press the rear window defogger switch
Outside air is allowed to enter the
to defrost the rear window.
cabin. Use this position for ventilation
Refer to Rear Window Defogger on
or windshield defrosting.
page 4-58.
WARNING
▼ Heating
Do not use the
position (indicator
1. Press the
switch.
2. Set the air intake selector to the
light turns on) in cold or rainy
weather:
outside air position (indicator light
turns off).
Using the
position (indicator light
turns on) in cold or rainy weather is
3. Set the temperature control dial to
the hot position.
dangerous as it will cause the windows
to fog up. Your vision will be
4. Set the fan control dial to the
desired speed.
hampered, which could lead to a
serious accident.
5. If dehumidified heating is desired,
turn on the air conditioner.
NOTE
NOTE
The recirculated air position is the
If the windshield fogs up easily, press
default position whenever the
the
switch.
ignition is switched ON, the climate
If cooler air is desired at face level,
control system is on, and the outside
press the
switch and adjust the
temperature exceeds about 73°F
temperature control dial to maintain
(23℃).
maximum comfort.
5-7
Interior Features
Climate Control System
The air to the floor is warmer than air
▼ Ventilation
to the face (except when the
temperature control dial is set at the
1.
Press the switch.
extreme hot or cold position).
2.
Set the air intake selector to the
outside air position (indicator light
▼ Cooling
turns off).
3.
Set the temperature control dial to
1. Press the switch.
the desired position.
2. Set the temperature control dial to
4.
Set the fan control dial to the
the cold position.
desired speed.
3. Set the fan control dial to the
desired speed.
▼ Windshield Defrosting and
4. Turn on the air conditioner by
Defogging
pressing the A/C switch.
5. After cooling begins, adjust the fan
1.
Press the
switch.
control dial and temperature
2.
Set the temperature control dial to
control dial as needed to maintain
the desired position.
maximum comfort.
3.
Set the fan control dial to the
desired speed.
CAUTION
4.
If dehumidified heating is desired,
turn on the air conditioner.
If the air conditioner is used while
driving up long hills or in heavy traffic,
WARNING
monitor the high engine coolant
temperature warning indication to see
Do not defog the windshield using the
if it is displayed (page 7-22).
switch with the temperature
The air conditioner may cause engine
control set to the cold position:
overheating. If the warning indication
Using the
switch with the
is displayed, turn the air conditioner
temperature control set to the cold
off (page 7-15).
position is dangerous as it will cause
the outside of the windshield to fog
NOTE
up. Your vision will be hampered,
When maximum cooling is desired,
which could lead to a serious accident.
set the temperature control dial to
Set the temperature control to the hot
the extreme cold position and set
or warm position when using the
the air intake selector to the
switch.
recirculated air position, then turn
the fan control dial fully clockwise.
NOTE
If warmer air is desired at floor level,
Fogging on the windows clears up
press the
switch and adjust the
more easily while the air conditioner
temperature control dial to maintain
is on, but they will fog up more easily
maximum comfort.
if the air conditioner is turned off.
The air to the floor is warmer than air
Be careful that the windows do not
to the face (except when the
fog up when doing any of the
temperature control dial is set at the
following:
extreme hot or cold position).
Switching to recirculate mode
5-8
Interior Features
Climate Control System
Turning off the air conditioner
For maximum defrosting, turn on the
air conditioner, set the temperature
control dial to the extreme hot
position, and turn the fan control
dial fully clockwise.
If warm air is desired at the floor,
press the
switch.
With the
or
*1 switch, the air
conditioner is automatically turned
on and the outside air position is
automatically selected to defrost the
windshield. In the
switch, the
outside air position cannot be
changed to the recirculated air
position.
*1
Depending on the market.
▼ Dehumidifying
Operate the air conditioner in cool or
cold weather to help defog the
windshield and side windows.
1. Press the desired mode switch you
want to set.
2. Set the air intake selector to the
outside air position (indicator light
turns off).
3. Set the temperature control dial to
the desired position.
4. Set the fan control dial to the
desired speed.
5. Turn on the air conditioner by
pressing the A/C switch.
NOTE
One of the functions of the air
conditioner is dehumidifying the air
and, to use this function, the
temperature does not have to be set to
cold. Therefore, set the temperature
control dial to the desired position
(hot or cold) and turn on the air
conditioner when you want to
dehumidify the cabin air.
5-9
Interior Features
Climate Control System
Fully Automatic Type
▼ Fully Automatic Type
Climate control system information is displayed on the display.
1. Driver temperature control dial
2. AUTO switch
3. Temperature setting display (driver’s side)
4. Air intake display
5. Airflow display
6. Mode selector display
7. Linked auto-comfort display*1
8. Temperature setting display (passenger’s side)
9. SYNC (synchronized temperature) switch
10.Passenger temperature control dial
11.A/C switch
12.Rear window defogger switch
13.Windshield defroster switch
14.Mode selector switch
15.Fan control switch
16.Air intake selector switch
17.Power switch
*1
The display differs depending on the climate controls, or whether or not the seat
warmer, seat ventilation, and steering warmer are equipped.
▼ Control Switches
Selection of airflow mode
Outside/Recirculated air selection
AUTO switch
Air conditioner operation
By pressing the AUTO switch the
Seat warmer level selection*
following functions will be
Heated steering wheel operation*
automatically controlled in accordance
Seat Ventilation operation*
with the selected set temperature:
NOTE
Airflow temperature
AUTO switch indicator light
Amount of airflow
5-10
*Some models.
Interior Features
Climate Control System
When the AUTO switch indicator
NOTE
light is on, it indicates auto
The climate control system changes
operation, and the system will
to the individual operation mode
function automatically.
(SYNC switch indicator light turns
If any of the following switches are
off) by turning the front passenger
operated while in auto control, the
temperature control dial even when
AUTO switch indicator turns off.
the SYNC switch is on, which allows
Mode selector switch
individual control of the set
Fan control switch
temperature for the driver and front
Windshield defroster switch
passenger.
The functions for switches other
When you set the temperature to the
than those operated continue to
lower or upper limit, “Lo” or “Hi” is
operate in auto control.
displayed.
The temperature units for the
Power switch (System On/Off)
temperature setting display can be
The climate control system turns on or
changed in conjunction with the
off by pressing the power switch.
temperature units for the outside
temperature display.
Temperature control dial
Refer to Outside Temperature
This dial controls temperature. Turn it
Display on page 4-24.
clockwise for hot and
Fan control switch
counterclockwise for cold.
Turn the temperature control dial to
The fan has 7 speeds. The selected
adjust the temperature between 15 °C
speed will be displayed.
(60 °F) and 29 °C (84 °F).
Mode selector switch
When the SYNC switch is on:
The desired airflow mode can be
Turn the driver temperature control
selected (page 5-4).
dial to control the temperature
throughout the entire cabin.
NOTE
When the SYNC switch is off:
With the airflow mode set to the
Turn the driver or front passenger
temperature control dial to
position and the temperature control
dial set at a medium temperature,
independently control the
temperature on each side of the
heated air is directed to the feet and
air at a comparably lower
cabin.
temperature will flow through the
central, left and right vents.
To set the air vent to
, press the
windshield defroster switch.
In the
position, the outside air
position is automatically selected.
A/C switch
Pressing the A/C switch while the
AUTO switch is turned on will turn off
5-11
Interior Features
Climate Control System
the air conditioner (cooling/
NOTE
dehumidifying functions).
The recirculated air position is the
The on/off of the air conditioner
default position whenever the
switches each time the A/C switch is
ignition is switched ON, the climate
pressed.
control system is on, and the outside
NOTE
temperature exceeds about 73°F
(23℃).
The air conditioner operates when
To exit the default recirculated air
the A/C switch is pressed while the
position, press the air intake selector
air conditioner is turned off.
switch to select the outside air
The air conditioner may not function
position.
when the outside temperature
When the air intake selector switch is
approaches 0 °C (32 °F).
set to the outside air position and
Air intake selector switch
the outside temperature exceeds
about 73°F (23℃), the climate
Outside or recirculated air positions
control system may automatically
can be selected. Press the switch to
select the recirculated air position to
select outside/recirculated air
improve the efficiency of the climate
positions.
control system.
Recirculated air position (
)
SYNC (Synchronized Temperature)
Outside air is shut off. Air within the
switch
vehicle is recirculated. Use this
Use the SYNC switch to change the
position when going through tunnels,
mode between the individual
driving in congested traffic (high engine
operation (driver and passenger) and
exhaust areas), or when quick cooling
interconnection (simultaneous)
is desired.
modes.
Outside air position (
)
Interconnection mode (indicator light
Outside air is allowed to enter the
turns on)
cabin. Use this position for ventilation
The set temperature for the driver and
or windshield defrosting.
front passenger is controlled
simultaneously.
WARNING
Individual operation mode (indicator
Do not recirculate the air in the cabin
light turns off)
during cold or rainy weather:
The set temperature can be controlled
Recirculating the air in the cabin during
individually for the driver and front
cold and rainy weather is dangerous as
passenger.
it will cause the windows to fog up.
Your vision will be hampered, which
Windshield defroster switch
could lead to a serious accident.
Press the switch to defrost the
windshield and front door windows.
Refer to Windshield Defrosting and
Defogging on page 5-13.
5-12
Interior Features
Climate Control System
Rear window defogger switch
▼
Windshield Defrosting and
Defogging
Press the rear window defogger switch
to defrost the rear window.
Press the windshield defroster switch.
Refer to Rear Window Defogger on
In this position, the outside air position
page 4-58.
is automatically selected, and the air
conditioner automatically turns on.
▼ Operation of Automatic Air
The air conditioner will directly
Conditioner
dehumidify the air to the front
1. Press the AUTO switch. Selection of
windshield and side windows on page
the airflow mode, air intake
5-4.
selector and amount of airflow will
Airflow amount will be increased.
be automatically controlled.
2. Use the temperature control dial to
WARNING
select a desired temperature.
If you want to set the temperature
Set the temperature control to the hot
on the front passenger's side
or warm position when defogging
separately from the driver's side,
(
position):
turn the front passenger
Using the
position with the
temperature control dial to switch
temperature control set to the cold
the mode automatically to the
position is dangerous as it will cause
individual operation mode and set
the outside of the windshield to fog
the temperature for the front
up. Your vision will be hampered,
passenger's side.
which could lead to a serious accident.
To turn off the system, press the power
switch.
NOTE
NOTE
Fogging on the windows clears up
Set the control dial to the
more easily while the air conditioner
recommended temperature of 22 °C
is on, but they will fog up more easily
(72 °F), and then adjust it as desired.
if the air conditioner is turned off.
Setting the temperature to maximum
Be careful that the windows do not
hot or cold will not provide the
fog up when doing any of the
desired temperature at a faster rate.
following:
When selecting heat, the system will
Switching to recirculate mode
restrict airflow until the engine has
Turning off the air conditioner
warmed to prevent cold air from
Use the temperature control dial to
blowing out of the vents.
increase the air flow temperature
and defog the windshield more
quickly.
5-13
Interior Features
Climate Control System
▼ Sunlight/Temperature Sensor
The climate control system measures
inside and outside temperatures,
humidity and sunlight using the
sunlight/temperature sensor. It sets
temperatures inside the cabin
accordingly.
CAUTION
Do not obstruct both sensors,
otherwise the climate control system
will not operate properly.
Sunlight sensor
1. Sunlight sensor
Interior temperature sensor
1. Interior temperature sensor
5-14
Interior Features
Mazda Connect
What is Mazda Connect ?
▼ What is Mazda Connect ?
This manual only indicates a part of the information for Mazda Connect. For details,
check the Web owner's manual at the Mazda site for each country and region.
1. Radio
2. Bluetooth® Audio/Hands-Free Call/SMS (Short Message Service)
3. USB Audio/USB Video
4. USB port*1/SD card slot*2
5. SD card (Navigation system)*
*1
The location of the USB slot differs depending on the specifications.
*2
The SD card slot is for the navigation system only. For vehicles with the
navigation system, the SD card (Mazda genuine) with stored map data is
inserted into the SD card slot and used.
*Some models.
5-15
Interior Features
Mazda Connect
No.
Menu
Explanation
Fuel Efficiency Monitor:
Monitor fuel efficiency in real time and view fuel efficiency history.
SiriusXM Travel Link*:
(1)
Information
Access traffic information, weather, fuel prices, parking information
and sports scores.
Vehicle Status Monitor:
View important vehicle maintenance messages, information, and inter-
vals.
FM
AM
SiriusXM*
Pandora
(2)
Entertainment
Bluetooth
USB1 Audio/USB2 Audio
USB1 Video/USB2 Video
Audio Off
Displays text messages received by the mobile device paired to Mazda
(3)
Notifications
Connect and notifications from the vehicle.
By connecting your mobile device, such as a Smartphone, to Mazda
(4)
Communication
Connect via Bluetooth®, you can use the hands-free call and short mes-
sage functions.
The navigation system (vehicles with navigation system) can be used
when the SD card for the navigation system is inserted.
If the SD card for the navigation system is not inserted, the compass in-
(5)
Navigation
dicating the direction in which the vehicle is moving is displayed. The
compass may not indicate the correct bearing when the vehicle is stop-
ped or traveling at a slow speed.
For the navigation system operation, refer to the navigation system
manual.
5-16
*Some models.
Interior Features
Mazda Connect
No.
Menu
Explanation
You can change the settings for the Mazda Connect screen, sound set-
tings, and the vehicle functions.
In-Vehicle Displays:
Configures settings and content for all in-vehicle displays.
Sound Settings:
Configures the in-vehicle listening experience.
Safety Settings:
(6)
Settings
Configures safety and driver assistance features.
Vehicle Settings:
Configures vehicle convenience features.
Connectivity Settings:
Configures Bluetooth and other device connectivity settings.
System Settings:
Configures language, time, and other general settings.
You can use Apple CarPlay™ by connecting an iPhone® compatible with
(7)
Apple CarPlay
Apple CarPlay™.
You can use Android Auto™ by connecting an Android™ Smartphone
(8)
Android Auto
compatible with Android Auto™.
WARNING
Always adjust Mazda Connect while the vehicle is stopped:
Do not adjust Mazda Connect with the Commander switch while driving the
vehicle. Adjusting Mazda Connect with the Commander switch while driving the
vehicle is dangerous as it could distract your attention from the vehicle operation
which could lead to a serious accident.
Even if the audio remote control switches are equipped on the steering wheel, learn
to use the switches without looking down at them so that you can keep your
maximum attention on the road while driving the vehicle.
Do not allow the connection plug cord to get tangled with the selector lever:
Allowing the plug cord to become tangled with the selector lever is dangerous as it
could interfere with driving, resulting in an accident.
5-17
Interior Features
Mazda Connect
Do not adjust a mobile device or a similar product while driving the vehicle:
Adjusting a mobile device or a similar product while driving the vehicle is dangerous
as it could distract your attention from the vehicle operation which could lead to a
serious accident. Always adjust a mobile device or a similar product while the
vehicle is stopped.
CAUTION
For the purposes of safe driving, adjust the audio volume to a level that allows you
to hear sounds outside of the vehicle including car horns and particularly emergency
vehicle sirens.
NOTE
Do not use Mazda Connect for a long time with the engine stopped. Otherwise,
the battery power could be depleted.
If a mobile phone or CB radio is used in or near the vehicle, it could cause noise to
occur from the audio system. However, this does not indicate a problem.
5-18
Interior Features
Mazda Connect
Mazda Connect Basic Operations
▼ Mazda Connect Basic Operations
NOTE
The explanation of functions described in this manual may differ from the actual
operation, and the shapes of screens and buttons and the letters and characters
displayed may also differ from the actual appearance.
Additionally, depending on future software updates, the content may successively
change without notice.
▼ Commander Switch Operation
The commander switch can be used to switch to each function and to operate each
function.
Set the palm of your hand on the commander knob so that your fingers can touch
each of the switches.
You can switch the screens without having to look down at your hand.
NOTE
For safety reasons, some operations are disabled while driving the vehicle.
The shape of the switches varies depending on the specifications.
No.
Item
Explanation
Commander knob (selection):
1
Rotate or slide the commander knob to highlight/select the on-screen
functions you want to use.
5-19
Interior Features
Mazda Connect
No.
Item
Explanation
Commander knob (select):
2
Depress the commander knob to select the desired on-screen function
you want to use.
Entertainment button:
The audio source screen last used is displayed.
3
(During Apple CarPlay™ or Android Auto™ music playback)
Displays the Apple CarPlay™ or Android Auto™ now playing screen.
5-20
Interior Features
Mazda Connect
No.
Item
Explanation
Volume knob:
Volume adjustment
Adjust the volume by turning the volume knob.
If you adjust the volume during voice guidance, the volume of the
voice guidance will change.
If you adjust the volume during a hands-free call, the conversation vol-
ume will change.
Press the volume knob to mute/pause the audio. Press the knob again
to resume.
Power off/on
Press and hold to turn off the Mazda Connect power and turn off the
screen.
Press and hold again to turn on the Mazda Connect power.
NOTE
If you press the volume knob to mute an audio source which can be
paused, such as Apple CarPlay™, USB audio, or Bluetooth® audio,
while it is playing, the song playback pauses. Press the volume knob
4
again to cancel the mute and the pause at the same time.
Selecting a radio station
Radio stations saved to your Favorites can be selected by sliding the
volume knob left (SEEK DOWN)/right (SEEK UP) while listening to
FM/AM/SiriusXM®. The station will change each time you slide the
volume knob.
If you want to manually tune to the next available station before or af-
ter the currently selected station, slide and hold the volume knob left
(SEEK DOWN) or right (SEEK UP) until you hear a beep and the tuner
will select the next available station.
Playback Control
Music and video files can be cued when listening to stored content via
USB, Bluetooth®, and SiriusXM®, audio, or video.
Slide the volume knob right to skip to the next track or slide it to the
left to go back to the previous track. You can also slide and hold the
volume knob to fast forward or rewind the track.
5-21
Interior Features
Mazda Connect
No.
Item
Explanation
Favorites button:
Displays the favorites screen.
5
Press and hold to register AM/FM/SiriusXM® stations, contacts, navi-
gation destinations, or any highlighted menu items to create easily ac-
cessible shortcuts.
Home button:
Displays the home screen.
(While Apple CarPlay™ or Android Auto™ is displayed)
Displays the Apple CarPlay™ or Android Auto™ home screen.
6
(While Apple CarPlay™ or Android Auto™ is connected)
Press and hold while the Mazda Connect screen is displayed to switch
the screen from Mazda Connect to Apple CarPlay™ or Mazda Connect
to Android Auto™. In addition, press and hold while the Apple
CarPlay™ or Android Auto™ screen is displayed to switch to the Mazda
Connect screen.
Back button:
7
Returns to previous screen.
Map button:
Displays the navigation screen (vehicles with navigation system).
In order for the navigation system to function, the SD card for the navi-
gation system is required.
If the SD card for the navigation system is not inserted, the compass in-
dicating the direction in which the vehicle is moving is displayed.
For the navigation system operation, refer to the navigation system
8
manual.
(During Apple CarPlay™ or Android Auto™ route guidance)
Displays the Apple CarPlay™ or Android Auto™ map screen.
NOTE
With an active Mazda Navigation route, pressing the Map button will
repeat the navigation voice guidance.
5-22
Interior Features
Mazda Connect
▼ Audio Remote Control Switch Operation
The audio remote control switch is on the left side of the steering wheel. You can
operate basic audio functions, pick up/hang up the phone, or activate voice
control using the switch.
The shape of the switches may differ depending on the specifications.
No.
Item
Explanation
Volume adjustment button:
Press the (+) or (-) button to adjust the volume.
If you adjust the volume during voice guidance, the volume of the
1
voice guidance will change.
If you adjust the volume during a hands-free call, the conversation vol-
ume will change.
Seek Switch:
Selecting a radio station
(SEEK UP)
Radio stations saved to your Favorites can be selected by pressing the
seek switch while listening to FM/AM radio. The station will change to
the previous or next favorite station each time you press the seek
switch. If you want to manually tune to the next available station be-
fore or after the currently selected station, press and hold the seek
2
switch until it beeps and the tuner will select the next available station.
(SEEK DOWN)
Playback Control
Music and video files can be cued when listening to stored content via
USB, Bluetooth®, and SiriusXM®, audio, or video.
Slide the volume knob right to skip to the next track or slide it to the
left to go back to the previous track. You can also slide and hold the
volume knob to fast forward or rewind the track.
5-23
Interior Features
Mazda Connect
No.
Item
Explanation
SOURCE button:
The audio source can be switched each time the button is pressed.
In addition, when the button is pressed and held, the current au-
3
SOURCE
dio source is muted and the audio source selection screen is displayed.
(During Apple CarPlay™ or Android Auto™ playback)
Press and hold the SOURCE button to mute the current audio source.
Hang-up button:
(During a call)
Press the button to end the call.
4
(While receiving a call)
Press the button to refuse a call.
Talk/Pick-up button:
5
(While receiving a call)
Press the button to answer the call.
Mute button:
Press the button to mute.
Press it again to cancel the mute.
6
NOTE
If you press the mute button to mute an audio source which can be
paused, such as Apple CarPlay™, USB audio, or Bluetooth® audio,
while it is playing, the song playback pauses. Press the mute button
again to cancel the mute and the pause at the same time.
▼ Operation Using Voice Recognition Function
The shape of the switches may differ depending on the specifications.
5-24
Interior Features
Mazda Connect
No.
Item
Explanation
Talk/Pick-up button:
When the button is pressed, the voice recognition top screen is dis-
played and the voice recognition is activated.
1
(While voice guidance is being announced)
Press the button to skip the voice guidance.
Hang-up button:
2
Press the button to end the voice recognition.
Voice recognition activation
When the talk/pick-up button on the audio remote control switch is pressed, top
screen of the voice recognition will be displayed.
NOTE
When an Apple CarPlay™ or Android Auto™ compatible device is connected, the
Mazda Connect voice recognition system is disabled to allow the use of Siri® or
Android Auto™ voice recognition at any time with the talk/pick-up button.
Commands usable at any time
“Help” - Can be used to check for usable voice commands.
“Back” - Returns to the previous screen. When a voice command is spoken while on
the telephone number input screen, the content that was previously input is deleted.
“Cancel”- The voice recognition is ended.
Ending voice recognition
Do any one of the following operations:
Press the hang-up button.
Press and hold the talk/Pick-up button.
Say the word, “Cancel”.
Convenient operating tips for using the voice recognition function
Examples of effective voice commands in various categories are displayed on top
screen of the voice recognition.
5-25
Interior Features
Mazda Connect
NOTE
The voice command examples shown in this manual are only a partial list of the
available commands. Some commands may be unusable depending on the
specifications.
Some commands cannot be used depending on the device connection conditions
and the use conditions.
When the Barge-In setting is on, voice commands can be made even while the
voice guidance is being announced. For details on Barge-In, refer to the System
Settings section in the Mazda Connect Owner's Manual.
For details on voice commands which can be used on the navigation screen, refer
to the navigation system manual.
To prevent misunderstood voice commands, be aware of the following points:
Connect your mobile phone to Bluetooth® before operating the mobile phone
using voice recognition.
After pressing the talk/pick-up button, wait for the beep before speaking a
command.
Speaking in a slightly louder voice will improve voice recognition, but an
excessively loud voice is unnecessary. Try to speak in a slightly louder voice than
when talking to other passengers in the vehicle.
You do not need to speak slowly. Speak at a normal speed.
When calling a person in the device's phone book, the recognition rate increases
the longer the name is. Errors may occur with names that are short such as
“Mama”, “Home”, or “Wife”.
Speak clearly, without pausing between words or numbers.
Voice commands other than those specified, cannot be recognized. Speak in the
wording specified by the voice commands.
It is not necessary to face the microphone or approach it. Speak the voice
commands while maintaining a safe driving position.
Close the windows and the panorama sunroof* to reduce loud noises from outside
the vehicle and to prevent the airflow of the air-conditioning system from being a
disturbance when using Bluetooth® Hands-Free.
Make sure that the air flow from the air conditioner is not blowing on the
microphone.
If the voice recognition is poor with the guidance volume set to high, set the
Barge-In to OFF.
Examples of available voice commands
The specified name and number are put into the {}.
Common
Back
Help (You can listen to help guidance at each screen.)
{Line Number} (You can select the line number on the screen.)
Next Page
Previous Page
5-26
*Some models.
Interior Features
Mazda Connect
Cancel
Menu
All
Navigation
Entertainment
Communication
Setting
Voice Recognition Settings
Display Off
Music
Play Artist (You can also use “Play Artist {Artist name}”.)
Play Album (You can also use “Play Album {Album Name}”.)
Play Playlist (You can also use “Play Playlist {Playlist Name}”.)
Play Song (You can also use “Play Song {Song Name}”.)
Play Audiobook (You can also use “Play Audiobook {Audiobook Name}”.)
Play Podcast (You can also use “Play Podcast {Podcast Name}”.)
Radio
Tune to {Frequency} AM
Tune to {Frequency} FM
Tune to {Frequency} HD {Sub Channel}
SiriusXM Channel {Channel Number}
SiriusXM {Station Name}
SiriusXM Genre (You can also use “SiriusXM {Genre Name}”.)
Source
Change Source (You can also use “Change Source to USB”*1 and “USB”*1.)
Audio OFF (You can also use “Change Source to Audio OFF”.)
Phone
Dial Phone Number (You can also use “Dial {Phone Number}”.)
Call History
Call a Contact (You can also use “Call {Contact Name}” and “Call {Contact Name}
at {Number Type}”.)
Redial
*1
: Audio source names other than “USB” can also be used as follows:
Bluetooth/AM/FM/SiriusXM/Pandora/USB1 Audio/USB2 Audio/USB1 Video/
USB2 Video
5-27
Interior Features
Mazda Connect
▼ Appendix
Gracenote® Database
When connecting a USB audio device or Bluetooth® audio device to this unit and
playing audio, the unit searches the database stored in the vehicle for the album art.
If there is a match in the vehicle's database compilation to the music being played,
the album art is displayed. The database information stored in this device uses
database information in the Gracenote® music recognitions service.
SiriusXM Travel Link®*
CAUTION
ADVISORY ONLY
The weather information is subject to service interruptions and may contain errors or
inaccuracies and consequently should not be relied upon exclusively. You are urged
to check alternate weather information sources prior to making safety related
decisions. You acknowledge and agree that you shall be solely responsible for use of
the information and all decisions taken with respect thereto. By using this weather
service, you release and waive any claims against Sirius XM Radio Inc. and Mazda
Motor Corporation and all of their respective affiliates with regard to this service.
SiriusXM® Satellite Radio*
Products/applications shall display “Call [Appropriate Phone Number] to Enable
Services” for any unsubscribed SiriusXM Data Service(s).
This shall be shown on the same screen as the Radio ID and the service subscription
status:
Contact your SiriusXM Representative for the appropriate call center phone number.
U.S.A.: 1-877-447-0011
Canada: 1-877-438-9677
SiriusXM® All Access Subscription
Hopefully, you're already loving SiriusXM in your new Mazda. But don't stop there
— you can also listen on the app and online. All Access is the very best subscription
package - with the most channels and the most flexibility. With All Access, you get
every channel available on your vehicle, plus you can listen on the app, online, and
in your home on a variety of connected devices. — so you can enjoy SiriusXM
wherever you are. Here's what's included:
Over 150 satellite channels to enjoy in your car, coast-to-coast, 24/7.
All kinds of commercial-free music, plus every major sport, world-class news and
the biggest names in talk & entertainment.
5-28
*Some models.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст