Bobcat S150. Manual — part 2
S150 Bobcat Loader
Operation & Maintenance Manual
VI
SERIAL NUMBER LOCATIONS
Always use the serial number of the loader when
requesting service information or when ordering parts.
Early or later models (identification made by serial
number) may use different parts, or it may be necessary
to use a different procedure in doing a specific service
operation.
Figure 1
LOADER SERIAL NUMBER
The loader serial number plate is located on the outside
of the loader frame [Figure 1].
Explanation of loader Serial Number:
ENGINE SERIAL NUMBER
Figure 2
The engine serial number is located on the side of the
engine [Figure 2].
DELIVERY REPORT
Figure 3
The delivery report must be filled out by the dealer and
signed by the owner or operator when the Bobcat loader
is delivered. An explanation of the form must be given to
the owner. Make sure it is filled out completely [Figure 3].
1
P-45263
XXXX
XXXXX
Module 2. - Production
Sequence (Series)
Module 1. - Model / Engine
Combination
1. The four digit Model/Engine Combination Module
number identifies the model number and engine
combination.
2. The five digit Production Sequence Number identifies
the order which the loader is produced.
P-48387
B-16315
S150 Bobcat Loader
VII
Operation & Maintenance Manual
MACHINE IDENTIFICATION
FRONT
LIGHTS
GRAB
HANDLES
OPERATOR SEAT
with SEAT BELT
& SEAT BAR
TILT
CYLINDERS
†
BUCKET
◆
REAR AUXILIARY
QUICK COUPLERS
FRONT AUXILIARY
QUICK COUPLERS
STEPS
BUCKET
STEPS
REAR
GRILL
LIFT
CYLINDER
LIFT ARM
SUPPORT DEVICE
TAIL
LIGHT
REAR
LIGHT
✽
TIRES
REAR
DOOR
LIFT ARM
◆
Optional or Field Accessory (Not Standard Equipment)
✽
TIRES - Tires shown may not be standard. The machine is factory equipped with standard tires. Other tires are available.
†
Bucket - Several different buckets and other attachments are available for this machine.
●
ROPS, FOPS - Roll Over Protective Structure, per SAE J1040 and ISO 3471, and Falling Object Protective Structure per
ISO 3449, Level I. Level II is available.
●
OPERATOR CAB
(ROPS / FOPS)
B-19881
B-19880
S150 Bobcat Loader
Operation & Maintenance Manual
VIII
FEATURES, ACCESSORIES AND ATTACHMENTS
Standard Items
Model S150 Bobcat loaders are equipped with the
following standard items:
•
Automatically activated glow-plugs
•
Bobcat Interlock Control System (BICS)
•
Bob-Tach™ frame
•
CE certification
•
Deluxe operator cab*
Includes interior cab foam, side, top and rear
windows, accessory wire harness, dome light, and
electrical power port
•
Electrically activated proportional front auxiliary
hydraulics
•
Engine/hydraulics system shutdown
•
High-back cushion suspension seat
•
Hydraulic bucket positioning (including ON / OFF
switch)
•
Instrumentation
•
Lift arm support
•
Operating lights, front and rear
•
Parking brake
•
Seat bar
•
Seat belt
•
Spark arrestor muffler
•
Tyres - 10-16.5 - 10-ply - Bobcat heavy duty
* Roll Over Protective Structure (ROPS) - meets
requirements of SAE-J1040 and ISO 3471
Options and Accessories
Below is a list of some equipment available from your
Bobcat Loader dealer as Dealer and / or Factory Installed
Accessories and Factory Installed Options. See your
Bobcat dealer for other available options, accessories
and attachments.
•
Dealer Installed Accessories
•
7-pin attachment control kit
•
Back up alarm kit
•
Cab enclosure kit
•
Counterweight kit
•
Door sensor kit
•
FOPS kit **
•
Four-point lift kit
•
Fresh air heater kit
•
Front axle counterweight kit
•
Front door kit
•
Fuel cap locking kit
•
Operator cab, CE, enclosure kit
•
Plumbing kit for fresh air heater
•
Rear auxiliary hydraulic kit
•
Replacement Bob-Tach™
•
Secondary auxiliary hydraulics
•
Single-point lift kit
•
Special applications kit
•
Factory Options
•
Advanced Control System (ACS)
•
Advanced Hand Controls (AHC)
•
Cab enclosure with heat
•
Deluxe instrument panel
•
Power Bob-Tach™
•
Segmented tyres - 10-16.5
•
Segmented tyres - industrial type - 7.50-15
•
Selectable Joystick Controls (SJC)
•
Severe duty foam-filled tyres - 10-16.5 - 10-ply
•
Severe duty tyres - 10-16.5 - 10-ply
•
Super float tyres - 31-15.5 - 8-ply
** Falling Objects Protective Structure (FOPS) -
meets requirements of SAE-J1043 and ISO 3449,
Level I
Specifications subject to change without notice.
S150 Bobcat Loader
IX
Operation & Maintenance Manual
FEATURES, ACCESSORIES AND ATTACHMENTS
(CONT’D)
These and other attachments are approved for use on
this model loader. Do not use unapproved attachments.
Attachments not manufactured by Bobcat may not be
approved.
The versatile Bobcat loader quickly turns into a multi-job
machine with a tight-fit attachment hook-up . . . from
bucket to grapple to pallet fork to backhoe and a variety
of other attachments.
See your Bobcat dealer for more details on these and
other attachments and field accessories.
Increase the versatility of your Bobcat loader with a
variety of bucket styles and sizes.
Buckets Available
Many bucket styles, widths and different capacities are
available for a variety of different applications. They
include Construction & Industry, Low profile, Fertilizer
and Snow, to name a few. See your Bobcat dealer for the
correct bucket for your Bobcat loader and application.
Attachments
For specific model availability, see Bobcat Product Price List.
•
Angle blade
•
Angle broom*†
•
Auger
•
Backhoe
•
Box blade
•
Brushcat rotary cutter
•
Buckets
•
Chipper*
•
Combination bucket
•
Concrete pump*
•
Cutter crusher*
•
Digger
•
Dozer blade*
•
Dumping hopper
•
Ejector bucket
•
Farm grapple
•
Grader*
•
Hydraulic breaker**
•
Industrial grapple
•
Landplane
•
Landscape rake
•
Mixing bucket*
•
Pallet fork - hydraulic
•
Pallet fork - standard
•
Planer*
•
Rear stabiliser
•
Scarifier
•
Snow blower*
•
Sod layer*
•
Soil conditioner*
•
Spreader
•
Stump grinder*
•
Super scraper
•
Sweeper
•
Three-point hitch
•
Tiller
•
Tilt-Tatch™
•
Tracks, steel
•
Tree transplanter*
•
Trench compactor
•
Trencher
•
Utility forks
•
Vibratory roller
•
Water kit
•
Wheel saw
•
Whisker broom
*
Attachment control kit required.
** When operating the loader with this attachment, a Special Applications Kit, which includes a 12 mm Lexan
front door with 6 mm top and rear windows, must be used.
•
†Optional water kit.
BUCKET
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст