Acura RDX (2021 year). Manual in english — page 28
446
uu
When Driving
u
Tire Pressure Monitoring System (TPMS) with Tire Fill Assist
Driving
Tire Pressure Monitoring System (TPMS) with Tire
Fill Assist
Monitors the tire pressure while you are
driving. If your vehicle’s tire pressure becomes
significantly low, the low tire pressure/TPMS
indicator comes on and a message appears on
the multi-information display.
1
Tire Pressure Monitoring System (TPMS) with Tire Fill Assist
Conditions such as low ambient temperature and
altitude change directly affect tire pressure and can
trigger the low tire pressure/TPMS indicator to come
on.
2
If the Low Tire Pressure/TPMS Indicator
Comes On or Blinks
P. 625
Tire pressure checked and inflated in:
•
Warm weather can become under-inflated in
colder weather.
•
Cold weather can become over-inflated in warmer
weather.
The low tire pressure/TPMS indicator will not come
on as a result of over inflation.
The TPMS audibly and visually informs you of
changes in tire pressure of the individual tire that you
are adjusting using audible and visual indications.
If a change in tire pressure has been significant, the
system beeps and the hazard lights flash continuously
for five seconds when the specified tire pressure is
reached. Stop filling the tire.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
447
uu
When Driving
u
Tire Pressure Monitoring System (TPMS) with Tire Fill Assist
Driving
To select the tire pressure monitor, set the power
mode to ON, and roll the right selector wheel
until you see the tire pressure screen.
The pressure for each tire is displayed in psi
(U.S.) or kPa (Canada).
Tire Pressures Low
is displayed when a tire
has significantly low pressure. The specific tire
is displayed on the screen.
■
Tire Pressure Monitor
1
The pressure displayed on the multi-information
display can be slightly different from the actual
pressure as measured by a gauge. If there is a
significant difference between the two values, or if
the low tire pressure/TPMS indicator and the message
on the multi-information display do not go off after
you have inflated the tire to the specified pressure,
have the system checked by a dealer.
Tire Pressure Monitor System Problem. Check
Tire Pressure. See Your Dealer.
may appear if you
drive with the compact spare tire
*
, or there is a
problem with the TPMS.
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
448
uu
When Driving
u
Tire Pressure Monitoring System (TPMS) - Required Federal Explanation
Driving
Tire Pressure Monitoring System (TPMS) - Required
Federal Explanation
Each tire, including the spare (if provided), should be checked
monthly when cold and inflated to the inflation pressure
recommended by the vehicle manufacturer on the vehicle placard
or tire inflation pressure label.
(If your vehicle has tires of a different size than the size indicated
on the vehicle placard or tire inflation pressure label, you should
determine the proper tire inflation pressure for those tires.)
As an added safety feature, your vehicle has been equipped with
a tire pressure monitoring system (TPMS) that illuminates a low
tire pressure telltale
when one or more of your tires is significantly under-inflated.
Accordingly, when the low tire pressure telltale illuminates, you
should stop and check your tires as soon as possible, and inflate
them to the proper pressure.
Driving on a significantly under-inflated tire causes the tire to
overheat and can lead to tire failure. Under-inflation also reduces
fuel efficiency and tire tread life, and may affect the vehicle’s
handling and stopping ability.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
449
uu
When Driving
u
Tire Pressure Monitoring System (TPMS) - Required Federal Explanation
Driving
Please note that the TPMS is not a substitute for proper tire
maintenance, and it is the driver’s responsibility to maintain
correct tire pressure, even if under-inflation has not reached the
level to trigger illumination of the TPMS low tire pressure telltale.
Your vehicle has also been equipped with a TPMS malfunction
indicator to indicate when the system is not operating properly.
The TPMS malfunction indicator is combined with the low tire
pressure telltale. When the system detects a malfunction, the
telltale will flash for approximately one minute and then remain
continuously illuminated. This sequence will continue upon
subsequent vehicle start-ups as long as the malfunction exists.
When the malfunction indicator is illuminated, the system may
not be able to detect or signal low tire pressure as intended.
TPMS malfunctions may occur for a variety of reasons, including
the installation of replacement or alternate tires or wheels on the
vehicle that prevent the TPMS from functioning properly.
Always check the TPMS malfunction telltale after replacing one or
more tires or wheels on your vehicle to ensure that the
replacement or alternate tires and wheels allow the TPMS to
continue to function properly.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
450
uu
When Driving
u
Blind spot information System
*
Driving
Blind spot information System
*
Is designed to detect vehicles in specified alert zones adjacent to your vehicle,
particularly in harder to see areas commonly known as “blind spots.”
When the system detects vehicles approaching from behind in adjacent lanes, the
appropriate indicator comes on for a few seconds, providing assistance when you
change lanes.
■
How the system works
1
Important Safety Reminder
Like all assistance systems, blind spot information
system has limitations. Over reliance on blind spot
information system may result in a collision.
The blind spot information system alert indicator may
not come on under the following conditions:
•
A vehicle does not stay in the alert zone for more
than two seconds.
•
A vehicle is parked in a side lane.
•
The speed difference between your vehicle and the
vehicle you are passing is greater than 6 mph (10
km/h).
•
An object not detected by the radar sensors
approaches or passes your vehicle.
•
A vehicle running in the adjacent lane is a
motorcycle or other small vehicle.
3
WARNING
Failure to visually confirm that it is safe to
change lanes before doing so may result in
a crash and serious injury or death.
Do not rely only on the blind spot
information system when changing lanes.
Always look in your mirrors, to either side
of your vehicle, and behind you for other
vehicles before changing lanes.
●
The transmission is in
(
D
or
(
S
.
●
Your vehicle speed is
between 20 mph (32
km/h) and 100 mph
(160 km/h)
Alert zone range
A: Approx. 1.6 ft. (0.5 m)
B: Approx. 10 ft. (3 m)
C: Approx. 10 ft. (3 m)
Radar Sensors:
underneath the
rear bumper
corners
Alert Zone
A
B
C
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
451
uu
When Driving
u
Blind spot information System
*
Driving
■
When the system detects a vehicle
Blind spot information System Alert Indicator:
Located near the pillar on both sides.
Comes on when:
•
A vehicle enters the alert zone from behind
to overtake you with a speed difference of
no more than 31 mph (50 km/h) from your
vehicle.
•
You pass a vehicle with a speed difference
of no more than 12 mph (20 km/h).
Blinks and a beeper sounds when:
You move the turn signal lever in the direction
of the detected vehicle. The beeper sounds
three times.
1
The system is for your convenience only. Even if an
object is within the alert zone, the following
situations may occur.
•
The blind spot information system alert indicator
may not come on due to obstruction (splashes,
etc.) even without the
Blind Spot Information
System Not Available
multi-information display
appearing.
•
The blind spot information system alert indicator
may come on even with the message appearing.
You can turn off the audible alert, or all the blind spot
information system alert using the audio/information
screen.
2
P. 341
Turn the system off when towing a trailer.
The system may not work properly for the following
reasons:
•
The added mass tilts the vehicle and changes the
radar coverage.
•
The trailer itself can be detected by the radar
sensors, causing the blind spot information system
alert indicators to come on.
Comes On
Blinks
Blind spot information
System Alert Indicator
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
uu
When Driving
u
Blind spot information System
*
452
Driving
1
Blind spot information system may be adversely
affected when:
•
Objects (guard rails, poles, trees, etc,.) are
detected.
•
An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
•
Driving on a curved road.
•
A vehicle is moving from a far lane to the adjacent
lane.
•
The system picks up external electrical interference.
•
The rear bumper or the sensors have been improperly
repaired or the rear bumper has been deformed.
•
The orientation of the sensors has been changed.
•
In bad weather (Heavy rain, snow, and fog).
For a proper blind spot information system operation:
•
Always keep the rear bumper corner area clean.
•
Do not cover the rear bumper corner area with
labels or stickers of any kind.
•
Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be
repaired, or the rear bumper corner area is strongly
impacted.
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
453
Continued
Driving
AcuraWatch
TM
AcuraWatch
TM
is a driver support system which employs the use of two distinctly
different kinds of sensors: a radar sensor located behind the emblem and a front
sensor camera mounted to the interior side of the windshield, behind the rearview
mirror.
AcuraWatch
TM
has following functions.
■
The functions which do not require switch operations to activate
•
Collision Mitigation Braking System
TM
(CMBS
TM
)
2
P. 456
•
Road Departure Mitigation (RDM) System
2
P. 491
■
The functions which require switch operations to activate
•
Adaptive Cruise Control (ACC) with Low Speed Follow
2
P. 466
•
Lane Keeping Assist System (LKAS)
2
P. 483
-------------------------------------------------------------------------------------------------------------------------------------------------------------
454
uu
AcuraWatch
TM
u
Driving
■
MAIN Button
Press to activate standby mode for ACC with
Low Speed Follow and LKAS. Or press to
cancel these systems.
■
LKAS Button
Press to activate or cancel the LKAS.
■
RES/+/SET/− Switch
Press
RES/+
to resume the ACC with Low
Speed Follow or increase the vehicle speed.
Press
SET/−
to set the ACC with Low Speed
Follow or decrease the vehicle speed.
■
Interval Button
Press the (interval) button to change the
ACC with Low Speed Follow following-
interval.
■
CANCEL Button
Press to cancel ACC with Low Speed Follow.
■
Operation Switches for the ACC with Low Speed Follow/
LKAS
Interval
Button
LKAS
Button
MAIN
Button
CANCEL
Button
RES/+
/
SET/−
Switch
-------------------------------------------------------------------------------------------------------------------------------------------------------------
455
uu
AcuraWatch
TM
u
Driving
You can see the current state of ACC with
Low Speed Follow and LKAS.
You can have the head-up display show you
the current state of each function.
2
■
Multi-Information Display Content
a
Indicates that ACC with Low Speed Follow
and LKAS are ready to be activated.
b
Indicates that LKAS is activated and
whether or not traffic lane lines are
detected.
c
Indicates whether or not ACC with Low
Speed Follow detected the vehicle ahead.
d
Indicates that ACC with Low Speed Follow
shows the set vehicle speed.
e
Indicates that ACC with Low Speed Follow
shows the set vehicle interval.
Models with Head-up display
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
456
uu
AcuraWatch
TM
u
Collision Mitigation Braking System
TM
(CMBS
TM
)
Driving
Collision Mitigation Braking System
TM
(CMBS
TM
)
Can assist you when there is a possibility of your vehicle colliding with a vehicle or a
pedestrian detected in front of yours. The CMBS
TM
is designed to alert you when the
potential for a collision is determined, as well as to reduce your vehicle speed to help
minimize collision severity when a collision is deemed unavoidable.
■
How the system works
1
Collision Mitigation Braking System
Important Safety Reminder
The CMBS
TM
is designed to reduce the severity of an
unavoidable collision. It does not prevent a collision
nor stop the vehicle automatically. It is still your
responsibility to operate the brake pedal and steering
wheel appropriately according to the driving
conditions.
The CMBS
TM
may not activate or may not detect a
vehicle in front of your vehicle under certain
conditions:
2
P. 460
You can read about handling information for the
camera equipped with this system.
2
P. 495
For directions on the proper handling of the radar
sensor, refer to the following page.
2
P. 497
When the CMBS
TM
activates, it may automatically
apply the brake. It will be canceled when your vehicle
stops or a potential collision is not determined.
The radar sensor
is behind the
emblem.
The camera is located
behind the rearview
mirror.
The system starts monitoring the roadway ahead when your vehicle speed is about
3 mph (5 km/h) and there is a vehicle in front of you.
When to use
The CMBS
TM
activates when:
●
The speed difference between your vehicle and a vehicle or pedestrian detected in
front of you becomes about 3 mph (5 km/h) and over with a chance of a collision.
●
Your vehicle speed is about 62 mph (100 km/h) or less and the system determines
there is a chance of a collision with:
- Vehicles detected in front of you that are stationary, oncoming, or traveling in your
same direction.
- A pedestrian who is detected in front of you.
●
Your vehicle speed is above 62 mph (100 km/h), and the system determines there
is a chance of a collision with a vehicle detected in front of you traveling in your
same direction.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
457
uu
AcuraWatch
TM
u
Collision Mitigation Braking System
TM
(CMBS
TM
)
Driving
■
When the system activates
You can change the distance (
Long
/
Normal
/
Short
) between vehicles at which the
system’s earliest collision alert will come on through audio/information screen
setting options.
2
P. 341
1
Collision Mitigation Braking System
The camera in the CMBS
TM
is also designed to detect
pedestrians.
However, this pedestrian detection feature may not
activate or may not detect a pedestrian in front of
your vehicle under certain conditions.
Refer to the ones indicating the pedestrian detection
limitations from the list.
2
The head-up warning uses a lens located at the front
end of the dashboard.
Do not cover the lens or spill any liquid on it.
Models with Head-up display
Lens
The system provides visual and audible alerts of a possible collision, and stops if the
collision is avoided.
u
Take appropriate action to prevent a collision (apply the brakes, change
lanes, etc.).
Beep
Head-up Warning
Lights
*
Visual Alerts
Audible Alert
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
458
uu
AcuraWatch
TM
u
Collision Mitigation Braking System
TM
(CMBS
TM
)
Driving
The system has three alert stages for a possible collision. However, depending on circumstances, the CMBS
TM
may not go through all of
the stages before initiating the last stage.
■
Collision Alert Stages
Distance between vehicles
CMBS
TM
The radar sensor detects a vehicle
Audible & Visual WARNINGS
Braking
Stage
one
There is a risk of a collision with the
vehicle ahead of you.
When in
Long
, visual and audible alerts come
on at a longer distance from a vehicle ahead
than in
Normal
setting, and in
Short
, at a
shorter distance than in
Normal
.
—
Stage
two
The risk of a collision has increased,
time to respond is reduced.
Visual and audible alerts.
Lightly
applied
Stage
three
The CMBS
TM
determines that a
collision is unavoidable.
Forcefully
applied
Your Vehicle
Vehicle
Ahead
Normal
Short
Long
Your
Vehicle
Vehicle
Ahead
Your
Vehicle
Vehicle
Ahead
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Continued
459
uu
AcuraWatch
TM
u
Collision Mitigation Braking System
TM
(CMBS
TM
)
Driving
Press and hold the button until the beeper
sounds to switch the system on or off.
When the CMBS
TM
is off:
•
The CMBS
TM
indicator in the instrument
panel comes on.
•
A message on the multi-information display
reminds you that the system is off.
The CMBS
TM
is turned on every time you start
the engine, even if you turned it off the last
time you drove the vehicle.
■
CMBS
TM
On and Off
1
Collision Mitigation Braking System
The CMBS
TM
may automatically shut off, and the
CMBS
TM
indicator will come and stay on under certain
conditions:
2
When the CMBS
TM
is activated, it will continue to
operate even if the accelerator pedal is partially
depressed. However, it will be canceled if the
accelerator pedal is deeply depressed.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
uu
AcuraWatch
TM
u
Collision Mitigation Braking System
TM
(CMBS
TM
)
460
Driving
The system may automatically shut off and the CMBS
TM
indicator will come on under
certain conditions. Some examples of these conditions are listed below. Other
conditions may reduce some of the CMBS
TM
functions.
2
P. 495
■
Environmental conditions
•
Driving in bad weather (rain, fog, snow, etc.).
•
Sudden changes between light and dark, such as an entrance or exit of a tunnel.
•
There is little contrast between objects and the background.
•
Driving into low sunlight (e.g., at dawn or dusk).
•
Strong light is reflected onto the roadway.
•
Driving in the shadows of trees, buildings, etc.
•
Roadway objects or structures are misinterpreted as vehicles and pedestrians.
•
Reflections on the interior of the windshield.
•
Driving at night or in a dark condition such as a tunnel.
■
Roadway conditions
•
Driving on a snowy or wet roadway (obscured lane marking, vehicle tracks,
reflected lights, road spray, high contrast).
•
Driving on curvy, winding, or undulating roads.
•
The road is hilly or the vehicle is approaching the crest of a hill.
■
CMBS
TM
Conditions and Limitations
1
Collision Mitigation Braking System
Have your vehicle checked by a dealer if you find any
unusual behavior of the system (e.g., the warning
message appears too frequently).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
461
uu
AcuraWatch
TM
u
Collision Mitigation Braking System
TM
(CMBS
TM
)
Continued
Driving
■
Vehicle conditions
•
Headlight lenses are dirty or the headlights are not properly adjusted.
•
The outside of the windshield is blocked by dirt, mud, leaves, wet snow, etc.
•
The inside of the windshield is fogged.
•
An abnormal tire or wheel condition (wrong sized, varied size or construction,
improperly inflated, compact spare tire
*
, etc.).
•
When tire chains are installed.
•
The vehicle is tilted due to a heavy load or suspension modifications.
•
The camera temperature gets too high.
•
Driving with the parking brake applied.
•
When the radar sensor behind the emblem gets dirty.
•
The vehicle is towing a trailer.
* Not available on all models
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст