Acura RL (1996-2004 year). Manual — part 285
Front Seat
Seat Cover Replacement
SRS components are located in this area. Review the
SRS component locations and precautions and proce-
dures in the SRS section before performing repair or
service. Refer to the '99 - 01 Acura 3.5 RL Service
Manual, P/N 61SZ305.
CAUTION: Put on gloves to protect your hands.
NOTE:
• Take care not to tear the seams or damage the seat
covers.
• On the passenger's seat with side airbag, do not
touch the OPDS sensor in the seat-back pad, and
keep it away from oil. Oil can corrode the sensor
causing it to fail.
Seat-back cover removal:
1. Slide the front seat forward, and fold the seat-back
forward.
2. Remove the back cover (see page
).
3. Release the hook strips, then loosen the seat-back
cover.
HOOK STRIPS
HOOK STRIP
SEAT-BACK COVER
HOOK STRIPS
Main Menu
Table of Contents
4. Release the hooks of the reinforceing cloth from the
seat-back frame.
HOOK
REINFORCEING
CLOTH
SEAT-BACK
FRAME
5. Remove the headrest and headrest guides.
HEADREST
GUIDE
KNOB
SEAT-BACK
6. Pull back the edge of the seat-back cover all the way
around, and release the clips, then remove the seat-
back cover.
CLIP
WIRE
(Pad side)
SEAT-BACK
COVER
(cont'd)
Main Menu
Table of Contents
Front Seat
Seat Cover Replacement (cont'd)
7. Install the cover in the reverse order of removal,
and note these items:
• To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the clips, hooks,
and hook strips.
• Replace any clips you removed with new ones.
Install them with commercially available uphol-
stery ring pliers.
• Reinstall the hooks of the reinforceing cloth
securely.
• Use only original Honda or Acura replacement
seat-back covers.
• Passenger's seat: Reinitialize the OPDS control
unit. Refer to the '99 - 01 Acura 3.5 RL Service
Manual, P/N 61SZ305 (see
CLIP
UPHOLSTERY
RING PLIERS
HOOK
HOOK
REINFORCEING
CLOTH SEAT-BACK FRAME
HOOK
Main Menu
Table of Contents
Seat Harness Wiring Locations
NOTE: When assembling the front seat, make sure the
seat harness and connectors are fastened correctly.
8-way power adjustable (with power lumbar support
and seat heater):
SEAT-BACK
WIRE TIES
SIDE AIRBAG
HARNESS
POWER
LUMBAR
SUPPORT
MOTOR
SEAT-BACK
HEATER
HARNESS
[C] [A] [B]
[D]
POWER LUMBAR SUPPORT
SUBHARNESS
HOOK
SEAT
CUSHION
COVER
To seat belt
buckle.
To power
seat
switch.
HOOK
POWER
LUMBAR
SUPPORT
CONNECTOR
To seat
cushion
heater.
20-8
SEAT-BACK
HEATER
CONNECTOR
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст