Acura RL (1996-2004 year). Manual — part 582
License Plate Trim
Removal
CAUTION: Put on gloves to protect your hands.
NOTE: Take care not to scratch the trunk lid.
1. '01 model: Remove the trunk lid trim cover.
2. Remove the trunk lid trim.
Main Menu
Table of Contents
3. Remove the nuts and clip, detach the other clip, then
remove the license plate trim.
NOTE: Take care not to drop the nuts inside the trunk
lid.
Nut locations, 4
5 x 0.8 mm
1.8 N-m (0.18 kgf-m,
1.3 Ibf-ft)
Clip location, 1
CLIP
LICENSE
PLATE TRIM
CLIP
4. Installation is the reverse of the removal procedure.
NOTE: If necessary, replace any damaged clips.
Main Menu
Table of Contents
Side Window
Moldings
Removal
CAUTION: Put on gloves to protect your hands.
NOTE:
Take care not to scratch the body.
Remove the screws, and pull off the side window
molding by hand.
REAR PILLAR
MOLDING
Installation is the reverse of the removal procedure.
NOTE: If necessary, replace any damaged clips.
Clip locations, 12
CLIP
MOLDING
Screw locations, 4
CLIP
SIDE WINDOW
MOLDING
REAR
PILLAR
MOLDING
Main Menu
Table of Contents
Roof Molding
Removal
CAUTION: When prying with a flat-tip screwdriver, wrap
it with protective tape to prevent damage, and use pro-
tective tape on the body.
NOTE: Take care not to scratch the body.
ROOF
MOLDING
BRACKET
PIN
(Body side)
ROOF
MOLDING
PIN
BRACKET
Installation is the reverse of the removal procedure.
NOTE:
Take care not to damage the windshield molding.
Make sure the roof molding is installed securely.
ROOF MOLDING
PROTECTIVE
TAPE
WINDSHIELD
MOLDING
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст