Acura RL (2011 year). Manual — part 19
The
screen
displays several topics that help you
to understand your vehicle’s voice
control system. To go to the
screen, say or select
‘‘Voice command help.’’ Then select
a topic by saying either the topic
name or its line number.
To use the voice command tutorial,
say or select ‘‘Getting started.’’ The
display changes to the
screen.
When you say ‘‘Display menu’’ or
press the MENU button, the display
changes to the
screen.
To select a menu item, turn the
interface knob to highlight the item,
then press ENTER.
If some items appear grayed
out and cannot be selected, the
vehicle does not sense the driver’s
ID of the remote (see page
).
Select the line number of the tutorial
you want to view, and the tutorial will
automatically be read out. To stop
the system from reading the tutorial,
move the selector to the right.
174
CONTINUED
Voice command help
Voice
command help
Getting
started
Main Menu
Main Menu
Voice Command Help
Compass System (U.S. model without navigation system)
Fe
a
tu
re
s
287
NOTE:
10/08/04 19:30:58 31SJA660_292
-------------------------------------------------------------------------------------------------------------------------------------------------------------
When you make a selection (such as
), you will see the help
commands that can be used with the
voice control. To have the system
read the list, say ‘‘Read list,’’ or select
by moving the interface
selector to the right, and the system
will read the list to you.
The
screens display
the trip information from the multi-
information display in the gauge
assembly.
For a listing of all voice commands,
see
on page
.
To go to the
, say
‘‘Trip Computer,’’ select
from the main menu, or
press the TRIP button on the center
console panel.
307
Voice Command Index
Navigation general command
help
Trip computer
Trip computer
Trip
Computer
Trip Computer
Compass System (U.S. model without navigation system)
288
10/08/04 19:31:08 31SJA660_293
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The calendar feature allows you to
enter events and be reminded of
them in the future.
When you say ‘‘Calendar’’ or select
the
on the
screen, the display changes to the
screen.
Dates with an icon indicate there is a
schedule entry for that date.
Shows the estimated distance you
can travel on the fuel remaining in
the tank. This distance is estimated
from the average fuel economy over
the last several miles, so it will vary
with changes in speed, traffic, etc.
The average fuel, average speed, and
elapsed time meters can be reset
automatically (see page
).
The ‘‘Range’’ value is approximate,
and may vary from actual range.
The ‘‘Average Fuel’’ and ‘‘MPG’’
may vary from actual fuel
consumed. These values are
estimates only.
Shows the instantaneous fuel
economy in miles per gallon.
Shows you the instant fuel economy
in miles per gallon.
Shows you the average fuel economy
in miles per gallon since the display
was last reset.
Shows the elapsed time that the
ignition has been on since the display
was last reset.
Shows you the average speed in
miles per hour since the display was
last reset.
75
Range
MPG
Instant Fuel
Average Fuel
Elapsed Time
Average Speed
CONTINUED
Calendar
Resetting the Display
Calendar
Main Menu
Calendar
Compass System (U.S. model without navigation system)
Fe
a
tu
re
s
289
NOTE:
10/08/04 19:31:29 31SJA660_294
-------------------------------------------------------------------------------------------------------------------------------------------------------------
You can scroll through the calendar
day by day by turning the interface
knob, or select the day by voice.
When you push the interface
selector up or down, you can also
scroll through the calendar week by
week. When you say ‘‘Next month’’
or ‘‘Previous month,’’ or when you
push the interface selector to the
right or left, the system displays the
next or previous month.
Set your schedule by selecting the
day on the calendar, and the display
changes to the
screen.
The default for the reminder is
.
This allows the system to remind
you of the calendar item the next
time you start the vehicle. See
on page
.
Say or select
, then enter
the name of your title using the
interface selector. Once you enter
the title, say or select
. The
title will be displayed on the
specified date of the
screen.
Say or select
, and the
system will show the
screen. You can enter a
message on two lines. Use
to
change the line. Once you have
entered the message, say or select
. The message will be
displayed on the specified date of the
screen.
283
Reminder
System Start-up
Title
Message
Entering Your Schedule
Edit schedule
ON
Edit Title
DONE
Calendar
Edit Message
Enter
Message
DONE
Calendar
Compass System (U.S. model without navigation system)
290
10/08/04 19:31:40 31SJA660_295
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Message Icon
Delete
Done
Say or select
, and the
system displays a list of icons you
can select to help identify the type of
message you entered. The message
icon you choose will be displayed
alongside the specified date on the
screen.
From the
screen, select
the date of the schedule you wish to
remove. To remove the schedule,
say or select
.
Once you have finished entering the
schedule, say or select
. The
screen is redisplayed and
a category icon appears.
You can only enter one message
per day.
To re-activate a previous message,
turn the reminder setting from
to
. If it is not turned on,
the reminder will not be displayed
when you start the vehicle.
For more information, refer to
System Start-up on page
.
This allows you to move your
calendar entry to a different date. If
you say or select
, the
screen is displayed with
existing entries grayed out. Select a
new day and the
screen is redisplayed with the new
date.
283
CONTINUED
Message Icon
Calendar
Calendar
DELETE
DONE
Calendar
OFF
ON
Edit Date
Calendar
Edit schedule
Edit Date
Compass System (U.S. model without navigation system)
Fe
a
tu
re
s
291
NOTE:
10/08/04 19:31:55 31SJA660_296
-------------------------------------------------------------------------------------------------------------------------------------------------------------
When you say or select
,
the display changes to the
screen.
Enter the digits and operation
symbols with the interface selector.
Use the interface selector to control
the calculator, and calculator
‘‘conversion’’ feature.
To convert a unit of measurement,
do this:
Enter a numeric value to be
converted (for example, 100).
Push the interface selector down
to select
. The
screen above appears.
Turn the interface knob until the
conversion you want is highlighted
(weight, for example), then press
ENTER to select it. The screen for
that conversion type appears (see
illustration in step 4).
1.
2.
3.
Calculator
Convert
Calculator
Calculator
Unit conversion
Compass System (U.S. model without navigation system)
292
10/08/04 19:32:05 31SJA660_297
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Turn the interface knob until the
unit you want to convert from is
highlighted (kilogram, for
example), then press ENTER to
select it as it the example above.
The set-up functions consist of three
different screens that allow you to
change and update information in
the system. To display the
, say ‘‘Set up’’ or press the
SET UP button, and then select an
item. To select more setup items, say
‘‘More,’’ or select
at the top
right corner of the screen.
The first setup screen allows you to
change the system’s brightness,
contrast, black level, volume,
interface dial feedback, and clock
adjustment. To select a setup item,
turn the interface knob until it is
highlighted, then press ENTER to
select it.
4.
CONTINUED
System Set-up
Set up
screen
MORE
First Set up Screen
Compass System (U.S. model without navigation system)
Fe
a
tu
re
s
293
10/08/04 19:32:15 31SJA660_298
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
Brightness
Black Level
Volume
If you are having trouble viewing
the screen in bright lighting conditions,
try increasing the brightness.
Contrast
There are 11 possible brightness
settings. To change the brightness,
say ‘‘Brightness up’’ or ‘‘Brightness
down.’’ You can also select
and change the setting
by turning the interface knob.
There are 11 possible black level
settings. To change the black level,
say ‘‘Black level up’’ or ‘‘Black level
down.’’ You can also select
and change the setting by
turning the interface knob. Changes
to the display are very subtle
this
is normal.
Say ‘‘Volume up’’ or ‘‘Volume down.’’
There are 11 possible contrast
settings. To adjust the contrast, say
‘‘Contrast up’’ or ‘‘Contrast down.’’
You can also select
and
change the setting by turning the
interface knob. Changes to the
display are very subtle
this is
normal.
You can have separate
daytime and nighttime settings for
brightness, contrast, and black level.
Adjust each setting when the display
is in either daytime or nighttime
mode. Use the Display mode button
(see page
) to select daytime or
nighttime mode.
To adjust the volume of the system
voice, do one of these actions:
Select volume off.
If you turn the volume off,
you will not hear voice command
confirmations.
Select
, then change the
setting by turning the interface
knob.
298
Brightness
Black
Level
Contrast
Volume
Tip:
Compass System (U.S. model without navigation system)
294
NOTE:
NOTE:
10/08/04 19:32:32 31SJA660_299
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interface Dial Feedback
On
Auto
(default)
No
The system always
reads what you select.
The system reads your
selection only while
the vehicle is moving.
The system does not
read your selection.
Clock Adjustment
Changing this setting allows you to
control when (and if) the system will
read the current selection you
choose with the interface dial. This
feature can minimize the need to
look at the screen while operating
the dial. The three settings are
explained in the following table. The
factory default setting is
.
You can adjust the clock of your
system. When the battery is
disconnected or the fuse for the
compass system is removed, you
need to reset the time. See page
for more information on setting
the clock.
The second setup screen allows you
to change the system’s voice
recognition feedback, auto volume
for speed, and clock settings. To
select a setup item, turn the interface
knob until it is highlighted, then
press ENTER to select it.
313
CONTINUED
AUTO
Setting
Feedback Level
Second Set up Screen
Compass System (U.S. model without navigation system)
Fe
a
tu
re
s
295
10/08/04 19:32:45 31SJA660_300
-------------------------------------------------------------------------------------------------------------------------------------------------------------
To view the second setup screen, say
‘‘More,’’ or move the interface
selector to the right to select
.
To go back to the first setup screen,
say ‘‘Backward,’’ or move the
interface selector to the left to select
.
Allows you to turn voice control
system prompts ON or OFF. To
select
or
, turn the interface
knob to the right or left, then press
ENTER. When
, you will not
hear the voice control system
confirmations or prompts.
This compass system automatically
increases the system voice volume
according to the vehicle speed. This
setting allows you to adjust the rate
of the volume increase.
When you select
, the volume is
not increased by the vehicle speed.
To change the color, select
or
by turning the interface knob
to the right or left. Press ENTER,
then turn the interface knob to select
desired color. Press ENTER to select
your choice.
To view the
screen,
say ‘‘Color,’’ or select
on the
screen. You can choose from one of
five colors for the day and night
display modes.
Choose silver metal (factory
default) as the
color to obtain
the best display contrast.
Choose black metal (factory
default) as the
color to
obtain the best display contrast.
Voice Recognition Feedback
Auto Volume for Speed
Color
Compass System (U.S. model without navigation system)
MORE
BACK
ON
OFF
OFF
OFF
Day
Night
Select a color
Color
Day
Night
296
NOTE:
10/08/04 19:33:00 31SJA660_301
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbal Reminder
This function allows you to turn
verbal reminder ON or OFF.
Examples of these reminders
include:
To view the third setup screen, move
the interface selector down. To
return to the first setup screen, say
‘‘Backward,’’ or move the interface
selector to the left to select
.
The third setup screen allows you to
change the verbal reminder. To
select a setup item, turn the interface
knob until it is highlighted, then
press ENTER to select it.
To select
or
, turn the
interface knob to the right or left,
then press ENTER.
A reminder to fasten the driver’s
and front passenger’s seat belts
Driving with the trunk or a door
open
Driving with the parking brake on
Compass System (U.S. model without navigation system)
Third Set up Screen
BACK
ON
OFF
Fe
a
tu
re
s
297
10/08/04 19:33:11 31SJA660_302
-------------------------------------------------------------------------------------------------------------------------------------------------------------
If the battery goes dead or is
disconnected for any reason, you will
have to enter a security code into
both the audio system and the
compass system before you can use
it again.
If for any reason, you lose power to
the compass system (the battery was
disconnected), the system needs to
be initialized before you can use it.
Initialization requires this:
Entry of the compass system 4-
digit security code to ‘‘unlock’’ the
system.
GPS initialization. This may not be
needed depending on how long the
system was without power.
Pressing the
(
) button allows you to switch
display modes.
Each time you turn the ignition
switch to the ACCESSORY (I)
position, the display mode is in auto.
The screen changes between day
and night modes when you turn the
headlights on and off.
To override the auto mode, select
either day or night mode. This can
be useful if you want to use the
headlights during the day. Be aware
that using day mode at night will
make the screen extremely bright.
Compass System (U.S. model without navigation system)
Entering the Security Code
System Initialization
Setting Display Mode
Display
mode
298
10/08/04 19:33:24 31SJA660_303
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Depending on the length of time the
battery was disconnected, your
system may require GPS
initialization. If it does, the above
screen appears. Follow the
instructions on the screen.
When you purchased the vehicle,
you should have received two cards
that have the audio and compass
system’s security codes and serial
numbers. Keep these cards in a safe
place in case you need the codes. If
you lose the cards, you must obtain
the security codes from your dealer.
Enter the four-digit compass system
security code. If you have entered it
correctly, the display changes to the
. You have ten
chances to enter the correct code. If
all ten are incorrect, turn the ignition
switch to the LOCK (0) position,
then back to the ON (II) position to
have ten more chances to enter the
correct code.
To enter the code, turn the interface
knob to select the number, then
press ENTER to select it. Keep
doing the same procedure to enter
all four correct numbers. If you need
to delete the number you entered
mistakenly, move the interface
selector to the right.
Follow the instructions in the audio
system section to enter the 5-digit
audio code (see page
). The
system voice will not operate if the
audio code is not entered.
280
CONTINUED
GPS initialization
Compass System (U.S. model without navigation system)
Disclaimer screen
Fe
a
tu
re
s
299
10/08/04 19:33:34 31SJA660_304
-------------------------------------------------------------------------------------------------------------------------------------------------------------
After 30 minutes with this screen
displayed, turn off the engine and
restart the vehicle. If you now see
the
, the GPS
initialization is complete.
The average acquiring time is less
than 10 minutes, but it can take as
long as 45 minutes.
If the system is still unable to
acquire a signal, follow the
instructions on the screen, or
contact your local dealer for
assistance.
If within ten minutes the system fails
to locate a sufficient number of
satellites to locate your position, the
screen above appears. Follow the
instructions on the screen.
If this procedure is not necessary the
system proceeds directly to the
(see page
).
During initialization, the system
searches for all available GPS
satellites, and obtains their orbital
information. During this procedure
the vehicle should be out in the open
with a clear view of the sky.
286
Compass System (U.S. model without navigation system)
Disclaimer screen
Compass screen
300
NOTE:
10/08/04 19:33:43 31SJA660_305
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This EULA grants you
the following license;
You may use the SOFTWARE only
on the DEVICE.
NOT FAULT TOLERANT. THE
SOFTWARE IS NOT FAULT
TOLERANT. ALPINE
ELECTRONICS, INC., HAS
INDEPENDENTLY DETERMINED
HOW TO USE THE SOFTWARE IN
THE DEVICE, AND MS HAS
RELIED UPON ALPINE
ELECTRONICS, INC., TO
CONDUCT SUFFICIENT TESTING
TO DETERMINE THAT THE
SOFTWARE IS SUITABLE FOR
SUCH USE.
IF YOU DO NOT AGREE TO THIS
END USER LICENSE
AGREEMENT (‘‘EULA’’), DO NOT
USE THE DEVICE OR COPY THE
SOFTWARE. INSTEAD,
PROMPTLY CONTACT ALPINE
ELECTRONICS, INC., FOR
INSTRUCTIONS ON RETURN OF
THE UNUSED DEVICE(S) FOR A
REFUND. ANY USE OF THE
SOFTWARE, INCLUDING BUT
NOT LIMITED TO USE ON THE
DEVICE, WILL CONSTITUTE
YOUR AGREEMENT TO THIS
EULA (OR RATIFICATION OF
ANY PREVIOUS CONSENT).
You have acquired a device
(‘‘DEVICE’’) that includes software
licensed by ALPINE ELECTRONICS,
INC., from an affiliate of Microsoft
Corporation (collectively ‘‘MS’’).
Those installed software products of
MS origin, as well as associated
media, printed materials, and
‘‘online’’ or electronic documentation
(‘‘SOFTWARE’’) are protected by
international intellectual property
laws and treaties. The SOFTWARE
is licensed, not sold. All rights
reserved.
CONTINUED
Compass System (U.S. model without navigation system)
GRANT OF SOFTWARE
LICENSE.
License notice
Fe
a
tu
re
s
301
10/08/04 19:33:52 31SJA660_306
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Limitations, on Reverse Engineering,
Decompilation, and Disassembly.
You may not reverse engineer,
decompile, or disassemble the
SOFTWARE, except and only to the
extent that such activity is expressly
permitted by applicable law not with
standing this limitation.
Additional Software/Services. The
SOFTWARE may permit ALPINE
ELECTRONICS, INC.,, MS,
Microsoft Corporation or their
affiliates to provide or make
available to you SOFTWARE
updates, supplements, add-on
components, or Internet- based
services components of the
SOFTWARE after the date you
obtain your initial copy of the
SOFTWARE (‘‘Supplemental
Components’’).
No Liability for Certain Damages,
EXCEPT AS PROHIBITED BY LAW,
MS SHALL HAVE NO LIABILITY
FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL OR
INCIDENTAL DAMAGES ARISING
FROM OR IN CONNECTION
WITH THE USE OR
PERFORMANCE OF THE
SOFTWARE. THIS LIMITATION
SHALL APPLY EVEN IF ANY
REMEDY FAILS OF ITS
ESSENTIAL PURPOSE. IN NO
EVENT SHALL MS BE LIABLE
FOR ANY AMOUNT IN EXCESS
OF U.S.TWO HUNDRED FIFTY
DOLLARS (U.S.$250.00).
NO WARRANTIES FOR THE
SOFTWARE. THE SOFTWARE is
provided ‘‘AS IS’’ and with all faults.
THE ENTIRE RISK AS TO
SATISFACTORY QUALITY,
PERFORMANCE, ACCURACY,
AND EFFORT (INCLUDING LACK
OF NEGLIGENCE) IS WITH YOU.
ALSO, THERE IS NO WARRANTY
AGAINST INTERFERENCE WITH
YOUR ENJOYMENT OF THE
SOFTWARE OR AGAINST
INFRINGEMENT. IF YOU HAVE
RECEIVED ANY WARRANTIES
REGARDING THE DEVICE OR
THE SOFTWARE, THOSE
WARRANTIES DO NOT
ORIGINATE FROM, AND ARE
NOT BINDING ON, MS.
Compass System (U.S. model without navigation system)
302
10/08/04 19:33:58 31SJA660_307
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст