Acura TSX / Honda Accord CL. Manual — part 373
Fig. 24: Identifying Planetary Gear Inspection
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Reassembly
1.
Install the brush into the brush holder, and set the armature (A) in the brush holder (B). See Fig. 25 .
2. While squeezing a spring (C), insert it in the hole on the brush holder, and push it until it bottoms. Repeat
this for the other springs (D,E and F).
NOTE:
To seat the new brushes, slip a strip of #500 or #600 sandpaper, with the
grit side up, between the commutator and each brush, and smoothly rotate
the armature. The contact surface of the brushes will be sanded to the
same contour as the commutator.
NOTE:
Ensure the armature stays in the holder.
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
3.
Install the armature and brush holder assembly into the housing.
Fig. 25: Installing Brush Into The Brush Holder
Courtesy of AMERICAN HONDA MOTOR CO., INC.
STARTER SPECIFICATIONS
For starter service specifications, see SERVICE SPECIFICATIONS in ACURA - TSX article in
SPECIFICATIONS.
TORQUE SPECIFICATIONS
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
For starter torque specifications, see TORQUE SPECIFICATIONS in ACURA - TSX article in
SPECIFICATIONS.
WIRING DIAGRAMS
For wiring diagram on 2004 TSX models, see appropriate SYSTEM WIRING DIAGRAM article in
ELECTRICAL.
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
Fig. 1: Air Conditioning Circuit (1 of 3)
2004 Acura TSX
2004 SYSTEM WIRING DIAGRAMS Acura - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст