Acura TSX / Honda Accord CL. Manual — part 175

Fig. 64: White Raster Display

Black Raster

The entire display must be shown in black.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX

Fig. 65: Black Raster Display

Test Pattern

The chart below; shows the colors being used for the map and menu screens. This is for factory use only. To
check the color signal use the "RGB Color" diagnostic.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX

Fig. 66: Test Pattern Display

Monitor Adjustment

This allows the navigation display to be centered. Use the joystick to move the picture up/down or left/right. It
is unlikely that you will ever need to adjust the monitor position. The "Default" button will reset the display
position to factory specifications.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX

Fig. 67: Monitor Adjustment Display

Touch Panel Check

The panel touch sensing system consists of a touch sensitive resistive membrane covering the display. Contrary
to other systems using infrared beams, the screen has to be physically "touched" to make it work. The display
has capability of an almost infinite number of touch locations. However, to be compatible with earlier systems,
the software only senses the locations shown on the diagnostic screen below. Every possible touch button
position is shown on this diagnostic screen. Touching one of these areas should cause its color to reverse, and
sound a "beep". If the touch locations are off slightly (by less than one touch location), use the "Touch Panel
Calibration" diagnostic to re-align the touch "zones" with the screen image. If any areas of the screen either
don't respond, or respond at some other location when touched, then replace the display unit.

NOTE:

Unlike earlier screens that used infrared sensors, direct sunlight will not affect
this test.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX