Acura TSX / Honda Accord CL. Manual — part 442
Fig. 158: Installing Camshafts & Holders
7. Set the camshaft holders (B) and cam chain guide B (C) in place.
8. Tighten the bolts in sequence to the specified torque.
Specified Torque:
8 mm bolts: 22 N.m (2.2 kgf.m, 16 lbf.ft)
6 mm bolts: 12 N.m (1.2 kgf.m, 8.7 lbf.ft)
6 mm bolts: Locations 21, 22, 23
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 159: Camshaft Holder Bolt Torque Tightening Sequence
9. Install the cam chain (see CAM CHAIN INSTALLATION ), and adjust the valve clearance (see
VALVE CLEARANCE ADJUSTMENT ).
CYLINDER HEAD INSTALLATION
Install the cylinder head in the reverse order of removal.
1. Install the NEW coolant separator in the cylinder block, when replacing the cylinder block.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 160: Installing NEW Coolant Separator In The Cylinder Block
2. Clean the cylinder head and block surface.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
3. Install a NEW cylinder head gasket (A) and dowel pins (B) on the cylinder block. Always use a NEW
cylinder head gasket.
Fig. 161: Installing NEW Cylinder Head Gasket & Dowel Pins On The Cylinder Block
4. Set the crankshaft to top dead center (TDC). Align the TDC mark (A) on the crankshaft sprocket with the
pointer (B) on the cylinder block.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст