Acura TSX / Honda Accord CL. Manual — part 648

Fig. 15: Segment Table

DISPLAYING SENSOR INPUTS AT THE CLIMATE CONTROL UNIT

The climate control unit has a mode that displays sensor inputs it receives. This mode shows you what the
climate control unit is receiving from each of the sensors, one at a time, and it can help you determine if a
sensor is faulty.

CHECK THESE ITEMS BEFORE USING THE SENSOR INPUT DISPLAY MODE

1. Turn the ignition switch ON (II), and check the recirculation door function; press the recirculation button

to switch from FRESH to RECIRC. The air volume and sound should change slightly.

2. Set the temperature control knob to the desired test temperature. When selecting the test temperatures,

note these items:

z

"Lo" temperature setting will default to MAX COOL, VENT, and RECIRC.

z

"Hi" temperature setting will default to MAX HOT, FLOOR, and FRESH.

z

61°F through 89°F settings will use the automatic climate control logic.

z

Turn the ignition switch OFF.

TO RUN THE SENSOR INPUT DISPLAY MODE, FOLLOW THESE STEPS

1. Turn the ignition switch OFF.

2. Press and hold both the AUTO and DUAL buttons, then start the engine.

3. After the engine starts, release the buttons. The audio-HVAC display module display will flash the sensor

number and then the value for that sensor. Record the value displayed.

4. To advance to the next sensor, press the rear window defogger button.

2004 Acura TSX

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

Fig. 16: Sensor Input Display Mode Chart

5. To cancel the sensor input display mode, press the AUTO button, or turn the ignition off.

Fig. 17: Celsius To Fahrenheit Conversion Table (1 Of 2)

NOTE:

z

The sensor values will be displayed in degrees Celsius (°C) or an
alphanumeric code. Use the chart to convert the value to degrees
Fahrenheit (°F).

z

If the sensor value displays "Er" this indicates there is an open or
short in the circuit or sensor. Check for DTCs using the HDS, or refer
to checking DTCs by DTC indication to check for DTCs.

z

If necessary, compare the sensor input display to an alike, known-
good vehicle under the same test conditions.

z

If the sensor is out of the normal range, refer to the sensor test, or
substitute the sensor with a known-good, and recheck.

2004 Acura TSX

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

Fig. 18: Celsius To Fahrenheit Conversion Table (2 Of 2)

Fig. 19: Alphanumeric Conversion Table

DTC TROUBLESHOOTING INDEX

2004 Acura TSX

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

Fig. 20: Checking the DTCs by HDS

SYMPTOM TROUBLESHOOTING INDEX

NOTE:

Before performing symptom troubleshooting, check for body DTCs (see
TROUBLESHOOTING ), and power train DTCs (see GENERAL
TROUBLESHOOTING INFORMATION ).

2004 Acura TSX

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX