Acura TSX / Honda Accord CL. Manual — part 417
Fig. 61: Rotating The Crankshaft 180 Degrees Clockwise (Camshaft Pulley Turns 90 Degrees) For
No. 3 Cylinder
8. Check and, if necessary, adjust the valve clearance on No. 3 cylinder.
9. Rotate the crankshaft 180° clockwise (camshaft pulley turns 90°).
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 62: Rotating The Crankshaft 180 Degrees Clockwise (Camshaft Pulley Turns 90 Degrees) For
No. 4 Cylinder
10. Check and, if necessary, adjust the valve clearance on No. 4 cylinder.
11. Rotate the crankshaft 180° clockwise (camshaft pulley turns 90°).
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 63: Rotating The Crankshaft 180 Degrees Clockwise (Camshaft Pulley Turns 90 Degrees) For
No. 2 Cylinder
12. Check and, if necessary, adjust the valve clearance on No. 2 cylinder.
13. Install the cylinder head cover (see CYLINDER HEAD COVER INSTALLATION ).
CRANKSHAFT PULLEY REMOVAL & INSTALLATION
Special Tools Required:
z
Holder handle 07JAB-001020A
z
Holder attachment, 50 mm 07NAB-001040A
z
Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket
Removal
1. Remove the front tires/wheels.
2. Remove the splash shield (see step 18 of TRANSMISSION REMOVAL ).
3. Hold the pulley with holder handle (A) and holder attachment (B).
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 64: Holding The Pulley & Removing The Bolt
4. Remove the bolt with a 19 mm socket (C) and breaker bar.
Installation
1. Clean the crankshaft pulley (A), crankshaft (B), bolt (C), and washer (D). Lubricate as shown below.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст