Acura TSX / Honda Accord CL. Manual — part 466
Fig. 242: Driving A NEW Oil Seal Into The Block
22. Measure the distance between the cylinder block (A) and oil seal (B).
Oil Seal Installed Height: 0.2-1.2 mm (0.001-0.047 in.)
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 243: Measuring The Distance Between The Cylinder Block And Oil Seal
23. Install the baffle plates.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 244: Installing The Baffle Plates
24. Install the oil pump (see OIL PUMP INSTALLATION ).
25. Install the oil pan (see OIL PAN INSTALLATION ).
26. Install the cylinder head (see CYLINDER HEAD INSTALLATION ).
27. Install the transmission:
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
z
Manual transmission (see TRANSMISSION INSTALLATION ).
z
Automatic transmission (see TRANSMISSION INSTALLATION ).
28. Install the engine assembly (see ENGINE INSTALLATION ).
OIL PAN INSTALLATION
Special Tools Required: Engine hanger plate EQS00BRSX0
1. Remove old liquid gasket from the oil pan mating surfaces, bolts, and bolt holes.
2. Clean and dry the oil pan mating surfaces.
3. Apply liquid gasket, P/N 08718-0009, evenly to the cylinder block mating surface of the oil pan and to
the inner threads of the bolt holes.
NOTE:
Whenever any crankshaft or connecting rod bearing is replaced, it is
necessary after reassembly to run the engine at idling speed until it
reaches normal operating temperature, then continue to run it for about 15
minutes.
NOTE:
Do not install the parts if 4 minutes or more have elapsed since applying
liquid gasket Instead, reapply liquid gasket after removing the old residue.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст