Acura TSX / Honda Accord CL. Manual — part 727
Fig. 60: Separating The Tie-Rod Ball Joint
10. Separate the tie-rod ball joint and knuckle using the special tool (see BALL JOINT ).
11. Remove the P/S heat baffle plate (A).
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 61: Removing The P/S Heat Baffle Plate
12. Remove the feed line holder mounting bolt (A) on the front suspension subframe.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 62: Removing The Feed Line Holder Mounting Bolt
13. Remove the feed line holder mounting bolt (B) and return hose (C) from the gearbox mounting bracket
(D).
14. Place several shop towels under the line connections, and cover the gearbox mounting part to protect it
from the power steering fluid. Loosen the flare nut (A), and disconnect the feed line (B).
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 63: Disconnecting The Feed & Return Lines
15. Loosen the flare nut (C), and disconnect the return line (D).
16. After disconnecting the lines, plug or seal them with a piece of tape or equivalent to prevent foreign
materials from entering.
17. Remove the front suspension subframe left mid and mount (A).
NOTE:
Do not loosen the cylinder line A and B between the valve body unit and
the cylinder.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст