Acura TSX / Honda Accord CL. Manual — part 245

(B).

Fig. 5: Disconnecting The Connector From The Power Window Master Switch

4. Inspect the connector and socket terminals to be sure they are all making good contact.

z

If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Power Windows - TSX

z

If the terminals look OK, go to step 5.

5. With the power window master switch still disconnected, make these input tests at the connector. See Fig.

6 .

z

If any test indicates a problem, find and correct the cause, then recheck the system.

z

If all the input tests prove OK, go to step 6.

Fig. 6: Master Switch Input Test (Disconnected)

6. Reconnect the 23P connector to the switch, and perform the following input tests. See Fig. 7 .

z

If any test indicates a problem, find and correct the cause, then recheck the system.

z

If all the input tests prove OK, the control unit must be faulty; replace the power window master
switch.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Power Windows - TSX

Fig. 7: Master Switch Input Test (Connected)

DRIVER'S WINDOW MOTOR TEST

MOTOR TEST

1. Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).

2. Disconnect the 6P connector (A) from the window motor.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Power Windows - TSX

Fig. 8: Disconnecting The 6P Connector From The Window Motor

3. Test the motor in each direction by connecting battery power and ground according to the table. See Fig.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Power Windows - TSX