Acura TSX / Honda Accord CL. Manual — part 839

Fig. 57: Installing The Rear Mount Stop

31. Attach the shift cable end (A) to the control lever (B), then insert the control pin (C) into the control lever

hole through the shift cable end, and secure the control pin with the spring clip (D). Do not bend the shift
cable excessively.

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

Fig. 58: Attaching The Shift Cable End To The Control Lever, Then Inserting The Control Pin

32. Install the shift cable cover (E), then secure the shift cable holder (F) to the shift cable cover with the

three bolts.

33. Attach the torque converter to the drive plate with eight bolts (A). Rotate the crankshaft pulley as

necessary to tighten the bolts to 1/2 of the specified torque, then to the final torque, in a crisscross pattern.
After tightening the last bolt, check that the crankshaft rotates freely.

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

Fig. 59: Attaching The Torque Converter To The Drive Plate

34. Install the engine stiffener (B).

35. Secure the power steering fluid line with the clamps.

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

Fig. 60: Securing The Power Steering Fluid Line With The Clamps

36. Secure the power steering fluid line bracket (A) with the bolt, and install the steering gearbox heat shield

(B).

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX