Acura TSX / Honda Accord CL. Manual — part 913
Fig. 58: Installing The Cable Bracket And Cables
34. Apply a light coat of super high temp urea grease (P/N 08798-9002) to the cable ends, and install new
cotter pins (C).
35. Apply super high temp urea grease (P/N 08798-9002) to the end of the cylinder rod. Install the slave
cylinder. Take care not to bend the clutch line.
2004 Acura TSX
2004 MANUAL TRANSMISSIONS Removal & Installation - TSX
Fig. 59: Installing The Slave Cylinder
36. Install the battery base (see step 43 of ENGINE INSTALLATION ).
37. Install the air cleaner housing (see AIR CLEANER REMOVAL/INSTALLATION ).
38. Install the battery. Connect the positive (+) cable first, then the negative (-) cable to the battery.
39. Refill the transmission fluid (see TRANSMISSION FLUID INSPECTION AND REPLACEMENT ).
40. Test-drive the vehicle.
41. Check the clutch operation.
42. Check the front wheel alignment (see WHEEL ALIGNMENT PROCEDURES ).
43. Enter the anti-theft codes for the radio and navigation system, then enter the customer's radio station
presets.
2004 Acura TSX
2004 MANUAL TRANSMISSIONS Removal & Installation - TSX
2004 CLUTCHES
TSX
CLUTCH
SPECIAL TOOLS
Fig. 1: Special Tools (1 Of 2)
Fig. 2: Special Tools (2 Of 2)
COMPONENT LOCATION INDEX
2004 Acura TSX
2004 CLUTCHES TSX
2004 Acura TSX
2004 CLUTCHES TSX
Fig. 3: Locating Clutch Components
CLUTCH PEDAL, CLUTCH PEDAL POSITION SWITCH & CLUTCH INTERLOCK SWITCH
ADJUSTMENT
NOTE:
z
Check the clutch pedal position switch (see CLUTCH PEDAL POSITION
SWITCH TEST ).
z
Check the clutch interlock switch (see CLUTCH INTERLOCK SWITCH
TEST ).
2004 Acura TSX
2004 CLUTCHES TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст