Acura TSX / Honda Accord CL. Manual — part 508
Fig. 1: Identifying A/C Compressor/Alternator Belt Tensioner
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 ENGINE COOLING Specifications & Drive Belt Routing - TSX
SPECIFICATIONS
COOLING SYSTEM
COOLING SYSTEM SPECIFICATIONS
Model
Specification
Coolant Replacement Interval
120,000 Miles
(1)
Coolant Capacity
A/T
5.6 Qts. 5.3 L)
M/T
5.7 Qts. (5.4 L)
Pressure Cap Opens
14-18 psi (93-123 kPa)
Thermostat Opens
Starts
169-176° F (76-80° C)
Fully Open
194° F (90° C)
(1)
Replace after 10 years.
2004 Acura TSX
2004 ENGINE COOLING Specifications & Drive Belt Routing - TSX
Fig. 1: Identifying Component Locations
Courtesy of AMERICAN HONDA MOTOR CO., INC.
TROUBLE SHOOTING
STARTER CIRCUIT TROUBLE SHOOTING
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
Recommended Procedure
Manufacturer recommends to use a starter system tester. Connect and operate the equipment in accordance with
the manufacturer's instructions. For starter circuit trouble shooting procedure chart, see Fig. 2 .
NOTE:
z
Air temperature must be between 59° and 100°F (15° and 38°C) during this
procedure.
z
After this test, or any subsequent repair, reset the Engine Control Module
(ECM)/Powertrain Control Module (PCM) to clear any codes.
z
The battery must be in good condition and fully charged.
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст