Acura TSX / Honda Accord CL. Manual — part 216
Fig. 127: Tightening The Feed Line & Return Line Flare Nuts
16. Retighten the feed line flare nut (B) to the specified torque.
17. Install the front suspension subframe left mid mount (A).
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 128: Installing Front Suspension Subframe Left Mid Mount
18. Install the P/S heat baffle plate (A).
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 129: Installing The P/S Heat Baffle Plate
19. Wipe off any grease contamination from the ball joint tapered section and threads. Then reconnect the tie-
rod end (A) to the knuckle arms.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 130: Connecting Tie-Rod Ends To The Knuckle Arms
20. Install the tie-rod end ball joint nut, and tighten it to the specified torque. Then install the NEW cotter pin
(B), and bend it as shown (C) or (D).
21. Install the NEW cover seal (A) all the way around in the steering joint cover B. Make sure there are no
wrinkles in the seal, then install the steering joint cover B.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст