Acura TSX / Honda Accord CL. Manual — part 118

station presets.

z

Reset the clock.

z

Perform the power window control unit reset procedure (see RESETTING THE POWER
WINDOW ).

STEERING HANGER BEAM REPLACEMENT

1. Remove the dashboard (see DASHBOARD REMOVAL/INSTALLATION ).

2. Remove the these items from the dashboard:

a. Driver's outer dashboard trim (see DRIVER'S OUTER DASHBOARD TRIM

REMOVAL/INSTALLATION )

b. Gauge control module (see GAUGE CONTROL MODULE REPLACEMENT )

c. Audio-HVAC-display module (see AUDIO-HVAC DISPLAY MODULE

REMOVAL/INSTALLATION )

d. Glove box damper (see GLOVE BOX REMOVAL/INSTALLATION )

3. Pull out the switch panel (A) to release the clips, hooks (B) and disconnect the moonroof switch

connector (C) and VSA off switch connector (D).

NOTE:

Put on gloves to protect your hands.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

Fig. 133: Removing The Switch Panel

4. On both side, detach the clip, then remove the tweeters (A). Disconnect the tweeter connectors (B).

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

Fig. 134: Removing The Tweeters

5. From the front of the dashboard, detach the harness clips (A, B).

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

Fig. 135: Detaching The Harness Clips

6. Remove the glove box striker (A).

a. Remove the screws (B, C) securing the glove box striker.

b. Disconnect the glove box light bulb socket (D), and detach the harness clips (E, F) from the glove

box striker.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX