Acura TSX / Honda Accord CL. Manual — part 738
Fig. 102: Seating Piston Seal
53. Coat the sliding surface of the special tool (A) and NEW cylinder end seal (B) with power steering fluid.
Place the seal on the special tool with its grooved side (C) facing opposite the special tool.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 103: Placing The Seal On The Special Tool
54. Coat the surface of the steering rack (A) with power steering fluid.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 104: Installing The Cylinder End Seal Onto The Steering Rack
55. Install the cylinder end seal (B) onto the steering rack with its grooved side (C) toward the piston (D).
56. Separate the cylinder end seal from the special tool, then remove the special tool.
57. Install the NEW backup ring (A) on the steering rack, then place the backup ring and cylinder end seal
(B) against the piston (C).
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 105: Installing The NEW Backup Ring On The Steering Rack
58. Apply multipurpose grease to the steering rack teeth, then insert the steering rack into the gearbox
housing. Be careful not to damage the inner surface of the cylinder wall with the rack edges.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст