Acura TSX / Honda Accord CL. Manual — part 456
Fig. 207: Measuring Wear & Taper
5. Scored or scratched cylinder bores must be honed.
6. Check the top of the block for warpage. Measure along the edges and across the center as shown.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Engine Block Warpage:
Standard (New): 0.07 mm (0.003 in) Max
Service Limit: 0.10 mm (0.004 in.)
Fig. 208: Measuring Positions For The Top Of The Block
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 209: Checking The Top Of The Block For Warpage
7. Calculate the difference between the cylinder bore diameter and the piston diameter. If the clearance is
near or exceeds the service limit, inspect the piston and cylinder block for excessive wear.
Piston-To-Cylinder Clearance:
Standard (New): 0.020-0.040 mm (0.0008-0.0016 in.)
Service Limit: 0.05 mm (0.002 in.)
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 210: Checking Difference Between The Cylinder Bore Diameter & The Piston Diameter
CYLINDER HONING
1. Measure the cylinder bores (see BLOCK & PISTON INSPECTION ). If the block is to be reused, hone
NOTE:
Only a scored or scratched cylinder bore must be honed.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст