Acura TSX / Honda Accord CL. Manual — part 27
1. Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
2. Remove the connectors (A) from the headlight assembly (B).
Fig. 26: Removing The Headlight Assembly
3. Remove the four mounting bolts and the harness clip, then remove the headlight.
4. Remove the bolt and the corner upper beam (C) from the headlight.
5. Install the headlight in the reverse order of removal.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Exterior Lights - TSX
6. After replacement, adjust the headlights to local requirement.
LICENSE PLATE LIGHT REPLACEMENT
1. Open the trunk lid.
2. Push the retaining spring (A), then remove the light.
NOTE:
Be careful not to damage the bumper.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Exterior Lights - TSX
Fig. 27: Removing The License Plate Light
3. Disconnect the 2P connector (B) from the light.
TAILLIGHT REPLACEMENT
TAILLIGHT
1. Remove the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION ).
2. Open the trunk lid and remove the trunk side trim panel (see TRIM REMOVAL/INSTALLATION -
TRUNK AREA ).
3. Disconnect the connectors (A) from the taillight (B).
Brake/Taillight: 21/5 W
Turn Signal Light: 21 W
Side Marker Light: 3CP
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Exterior Lights - TSX
Fig. 28: Removing Taillight
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Exterior Lights - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст