Acura TSX / Honda Accord CL. Manual — part 898

Fig. 153: Measuring Clearance Between 80 mm Shim & Bearing Outer Race In Transmission
Housing

6. If the clearance is more than the standard, select a new shim from the following table. If the clearance

measured in step 5 is within the standard, go to step 9 .

2004 Acura TSX

2004 MANUAL TRANSMISSIONS Overhaul - ASU5 6-Speed

Fig. 154: 80 mm Shim Table

7. Remove the bolts and transmission housing.

8. Replace the thrust shim selected in step 6, then recheck the clearance.

9. Reinstall the transmission.

2004 Acura TSX

2004 MANUAL TRANSMISSIONS Overhaul - ASU5 6-Speed

2004 MANUAL TRANSMISSIONS

Removal & Installation - TSX

TRANSMISSION REMOVAL

Special Tools Required:

z

Engine hanger/adapter VSB02C000015*

z

Engine support hanger, A & Reds AAR-T-12566*

z

Subframe adapter VSB02C000016*

* Available through the Honda Tool and Equipment Program.

1. Secure the hood in its vertical position (support rod in the lower hole).

NOTE:

Use fender covers to avoid damaging painted surfaces.

2004 Acura TSX

2004 MANUAL TRANSMISSIONS Removal & Installation - TSX

2004 Acura TSX

2004 MANUAL TRANSMISSIONS Removal & Installation - TSX

Fig. 1: Secure The Hood With Support Rod In The Lower Hole

2004 Acura TSX

2004 MANUAL TRANSMISSIONS Removal & Installation - TSX