Acura TSX / Honda Accord CL. Manual — part 476
Fig. 3: Locating Engine Lubrication Components
SYMPTOM TROUBLESHOOTING INDEX
2004 Acura TSX
2004 ENGINES Lubrication System - TSX
Fig. 4: Engine Lubrication Symptom Troubleshooting Index
OIL PRESSURE SWITCH TEST
1. Remove the YEL/RED wire (A) from the engine oil pressure switch (B).
2004 Acura TSX
2004 ENGINES Lubrication System - TSX
Fig. 5: Removing The Wire From The Engine Oil Pressure Switch
2. Check for continuity between the positive terminal (C) and the engine (ground). There should be
continuity with the engine stopped. There should be no continuity with the engine running.
3. If the switch fails to operate, check the engine oil level. If the engine oil level is OK, check the engine oil
pressure. If the oil pressure is OK, replace the oil pressure switch (see OIL PRESSURE SWITCH
REPLACEMENT ).
OIL PRESSURE TEST
If the oil pressure warning light stays on with the engine running, check the engine oil level. If the oil level is
correct:
1. Remove the engine oil pressure switch, and install an oil pressure gauge (A).
2004 Acura TSX
2004 ENGINES Lubrication System - TSX
Fig. 6: Installing An Oil Pressure Gauge
2. Start the engine. Shut it off immediately if the gauge registers no oil pressure, and repair the problem
before continuing.
3. Allow the engine to-reach operating temperature (fan comes on at least twice). The pressure should be:
Engine Oil Temperature: 176°F (80°C)
Engine Oil Pressure:
At Idle: 70 kPa (0.7 kgf/cm
2
, 10 psi) minimum
At 3,000 RPM: 300 kPa (3.1 kgf/cm
2
, 44 psi) minimum
4. If the oil pressure is NOT within specifications, inspect these items.
z
Check the oil screen for clogging.
z
Check the oil pump (see OIL PUMP OVERHAUL ).
2004 Acura TSX
2004 ENGINES Lubrication System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст