Acura TSX / Honda Accord CL. Manual — part 824

Fig. 186: Measuring The Starting Torque Of The Differential Assembly In Both Directions

9. If the measurement is out of standard, remove the thrust shim and select the thrust shim from table below.

Install the new thrust shim and recheck. To increase the starting torque, increase the thickness of the
thrust shim. To decrease the starting torque, decrease the thickness of the shim. Changing the shim to the
next size will increase or decrease starting torque about 0.3-0.4 N.m (3-4 kgf.cm, 2-3 lbf.in).

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

Fig. 187: Thrust Shim Table (1 Of 2)

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

Fig. 188: Thrust Shim Table (2 Of 2)

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

2004 AUTOMATIC TRANSMISSIONS

Removal & Installation - TSX

TRANSMISSION REMOVAL

Special Tools Required:

z

Engine hanger adapter VSB02C000015

z

Engine support hanger, A and Reds AAR-T-12566 (Available through the Honda Tool and Equipment
Program )

z

Front subframe adapter EQS02C000011

1. Before disconnecting the battery, make sure you have the anti-theft code for the radio (and navigation

system), then write down the frequencies for the radio's preset stations.

2. Raise the vehicle, and make sure it is supported securely.

3. Remove the splash shield.

4. Remove the drain plug (A), and drain the automatic transmission fluid (ATF).

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX