Acura TSX / Honda Accord CL. Manual — part 627
Fig. 132: Measuring Voltage Between DLC Terminal No. 16 & Body Ground
2. Measure voltage between DLC terminals No. 4 and No. 16.
Is there battery voltage?
YES: Go to step 3.
NO: Repair open in the wire between DLC terminal No. 4 and body ground (G451).
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 133: Measuring Voltage Between DLC Terminals No. 4 & No. 16
3. Measure voltage between DLC terminals No. 5 and No. 16.
Is there battery voltage?
YES: Go to step 4.
NO: Repair open in the wire between the ECM/PCM (E3) and DLC terminal No. 5.
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 134: Measuring Voltage Between DLC Terminals No. 5 & No. 16
4. Turn the ignition switch ON (II).
5. Measure voltage between DLC terminals No. 5 and No. 7.
Is there 8.5 V or more?
YES: Go to step 11 .
NO: Go to step 6.
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 135: Measuring Voltage Between DLC Terminals No. 5 & No. 7
6. Turn the ignition switch OFF.
7. Jump the SCS line with the HDS.
8. Disconnect ECM/PCM connector E (31P).
9. Check for continuity between DLC terminal No. 7 and body ground.
Is there continuity?
YES: Repair short to ground in the wire between DLC terminal No. 7 and the ECM/PCM
(E23). After repairing the wire, check for a DTC with the HDS, then go to the indicated DTC
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст