Acura TSX / Honda Accord CL. Manual — part 211
Fig. 107: Inserting An Appropriate Size Deep Socket Wrench Onto The Steering Rack
60. Install the cylinder end seal (B) into the bottom of the cylinder by pressing on the tool with a press. Do
not push on the tool with excessive force as it may damage the cylinder end seal.
61. Remove the tool, and center the steering rack.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
62. Coat the sliding surface of the special tool (A) and NEW cylinder end seal (B) with power steering fluid.
Place the seal on the special tool with its grooved side (C) facing opposite the special tool.
Fig. 108: Placing The Seal On The Special Tool
63. Coat the inside surface of the special tool and steering rack with power steering fluid, then install the
cylinder end seal (A) onto the steering rack with its grooved side toward the cylinder.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 109: Installing The Cylinder End Seal Onto The Steering Rack
64. Separate the cylinder end seal from the special tool, then remove the special tool.
65. Push in the cylinder end seal with your finger. Be careful not to damage the face of the seal with the
threads and burrs at the staked position of the cylinder housing.
66. Hold the gearbox housing using a C-clamp (commercially available) (A) and wooden blocks (B). Do not
clamp the cylinder part of the gearbox housing in the vise.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 110: Holding The Gearbox Housing Using A C-Clamp & Wooden Blocks
67. Coat the inside surface of the cylinder end (A) with power steering fluid, then install the cylinder end by
screwing it into the cylinder (B). Tighten the cylinder end to the specified torque.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст