Acura TSX / Honda Accord CL. Manual — part 807
Fig. 124: Do Not Place The Special Tool Over An Area Of The Spring Retainer Which Is
Unsupported By The Return Spring
10. Compress the return spring.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 125: Compressing The Return Spring
11. Install the snap ring with snap ring pliers.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 126: Installing The Snap Ring With Snap Ring Pliers
12. Remove the special tools.
13. Install the waved spring (A) in the 1st clutch drum (B). Starting with the clutch plate, alternately install
the clutch plate (C) (5) and discs (D) (5), then install the clutch-end-plate (E) with the flat side toward the
disc.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 127: Installing The 1st Clutch Drum Components
14. Install the waved spring (A) in the 2nd clutch drum (B). Install the 4.0 mm-thick plate (C) with the shear
droop side (D) toward the inside of the drum, clutch disc (E), and 2.0 mm-thick flat-plate (F), then
starting with the disc, alternately install the discs (4) (G) and waved-plates (3) (H), then install the clutch-
end-plate (I) with the flat side toward the disc.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст