Acura TSX / Honda Accord CL. Manual — part 854
Fig. 34: Installing The Shift Cable
8. Verify that the shift cable end (A) is properly installed on the mounting stud (B).
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS Servicing - TSX
Fig. 35: Identifying Shift Cable End (Properly Installed)
Fig. 36: Identifying Shift Cable End (Improperly Installed)
9. If improperly installed, remove the shift cable from the bracket base, and reinstall the shift cable. Do not
install the shift cable end on the mounting stud while the shift cable is on the bracket base.
10. Install and tighten the nut.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS Servicing - TSX
Fig. 37: Installing The Nut
11. Remove the 6.0 mm (0.24 in.) pin that was installed to hold the shift lever.
12. Move the shift lever to each position, and verify that the A/T gear position indicator follows the
transmission range switch.
13. Push the shift lock release, and verify that the shift lever releases.
14. Reinstall the center console cover (see CENTER CONSOLE ).
Disassembly and Reassembly
Apply silicon grease to movable joints of the shift lock/reverse lock mechanism.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS Servicing - TSX
Fig. 38: Exploded View Of Shift Lever
TORQUE SPECIFICATIONS
TORQUE SPECIFICATIONS
Application
Ft. Lbs. (N.m)
ATF Drain Plug
36 (49)
Shift Cable End Nut
16 (22)
INCH Lbs.
Shift Cable Bracket Bolt
88 (10)
Shift Cable Cover Bolt
106 (12)
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS Servicing - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст