Acura TSX / Honda Accord CL. Manual — part 886
Fig. 106: Measuring The Clearance Between Each Gear & Its Synchro Ring All Around The Gear
MAINSHAFT BEARING & OIL SEAL REPLACEMENT
Special Tools Required:
z
Oil seal driver 07JAD-PL90100
z
Adjustable bearing puller, 20-40 mm 07736-A01000B
z
Attachment, 42 x 47 mm 07746-0010300
z
Driver 07749-0010000
z
Slide hammer, commercially available
1. Remove the differential assembly.
2. Remove the ball bearing (A) from the clutch housing (B) using the special tool and a commercially
available 3/8"-16 slide hammer (C).
2004 Acura TSX
2004 MANUAL TRANSMISSIONS Overhaul - ASU5 6-Speed
Fig. 107: Removing The Ball Bearing From The Clutch Housing
3. Remove the oil seal (A) from the clutch side. Be careful when removing the seal so the clutch housing is
not damaged.
2004 Acura TSX
2004 MANUAL TRANSMISSIONS Overhaul - ASU5 6-Speed
Fig. 108: Removing The Oil Seal From The Clutch Side
4. Drive the new oil seal in from the transmission side using the special tools.
2004 Acura TSX
2004 MANUAL TRANSMISSIONS Overhaul - ASU5 6-Speed
Fig. 109: Driving The New Oil Seal In
5. Drive the new ball bearing (A) in from the transmission side using the special tools.
2004 Acura TSX
2004 MANUAL TRANSMISSIONS Overhaul - ASU5 6-Speed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст