Acura TSX / Honda Accord CL. Manual — part 255
Fig. 19: Removing The Washer Reservoir
4. Install the reservoir in the reverse order of removal.
WASHER FLUID LEVEL SWITCH TEST
CANADA
1. Remove the right inner fender (see FRONT INNER FENDER REPLACEMENT ).
2. Disconnect the 2P connector (A) from the washer fluid level switch (B).
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Wipers/Washers - TSX
Fig. 20: Disconnecting The 2P Connector From The Washer Fluid Level Switch
3. Remove the washer fluid level switch from the reservoir.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Wipers/Washers - TSX
4. Check for continuity between the No. 1 and No. 2 terminals in each float position (C).
z
There should be continuity when the float is down.
z
There should be no continuity when the float is up.
WASHER TUBE REPLACEMENT
1. Remove the right inner fender (see FRONT INNER FENDER REPLACEMENT ).
2. Remove the windshield washer nozzles and clips, then remove the tube.
NOTE:
Fluid may flow out of the opening.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Wipers/Washers - TSX
Fig. 21: Removing The Windshield Washer Nozzles, Clips, And Then The Tube
3. Install in the reverse order of removal. Take care not to pinch the washer tube. Check the windshield
washer operation.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Wipers/Washers - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст