Acura TSX / Honda Accord CL. Manual — part 304
16.
Bend the band end (A) by tapping it down with a hammer. See Fig. 36 .
17. Install the boot band on the other end of the boot, and repeat steps 9 - 16 .
18. Install the new set ring. See Fig. 8 .
Fig. 31: Installing Boot Band
Courtesy of AMERICAN HONDA MOTOR CO., INC.
NOTE:
Make sure the band and clip do not interfere with anything, and the band
does not move. Remove any grease remaining on the surrounding
surfaces.
2004 Acura TSX
2004 DRIVE AXLES Axle Shafts - Front - TSX
Fig. 32: Marking Boot Band
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 DRIVE AXLES Axle Shafts - Front - TSX
Fig. 33: Installing Boot Band (1 of 4)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 DRIVE AXLES Axle Shafts - Front - TSX
Fig. 34: Installing Boot Band (2 of 4)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 DRIVE AXLES Axle Shafts - Front - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст