Acura TSX / Honda Accord CL. Manual — part 713
on a clean, dry floor, pull the scale as shown and read it as soon as the tires begin to turn.
z
If the scale reads no more than specifications, the gearbox and pump are OK.
z
If the scale reads more than specifications, troubleshoot the steering system (see SYMPTOM
TROUBLESHOOTING ).
Fig. 6: Checking Power Assist
STEERING LINKAGE & GEARBOX INSPECTION
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 7: Inspecting Steering Linkage & Gearbox
PUMP PRESSURE TEST WITH T/N 07406-0010001
Special Tools Required:
z
P/S joint adapter (pump) 07VAK-P8A011A
z
P/S joint adapter plate (pump) 07ZAK-S7CA100
z
P/S joint adapter (hose) 07ZAK-S7CA200
z
P/S pressure gauge 07406-0010001
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Check the fluid pressure as follows to determine whether the trouble is in the pump or gearbox.
1. Check the power steering fluid level (see FLUID REPLACEMENT ).
2. Disconnect the pump outlet hose (A) from the pump outlet with care so as not to spill the power steering
fluid on the frame and other parts. Install the P/S joint adapter (pump) on the pump outlet (B).
Fig. 8: Installing The P/S Joint Adapter (Pump) On The Pump Outlet
2004 Acura TSX
2004 STEERING Power Steering System - TSX
3. Connect the P/S joint adapter (hose) to the P/S pressure gauge, then connect the pump outlet hose (A) to
the P/S joint adapter (hose).
4. Install the P/S pressure gauge to the P/S joint adapter (pump).
5. Fully open the shut-off valve (A).
Fig. 9: Fully Open The Shut-Off Valve & The Pressure Control Valve
6. Fully open the pressure control valve (B).
7. Start the engine and let it idle.
8. Turn the steering wheel from lock-to-lock several times to warm the fluid to operating temperature at
158°F (70°C).
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст