Acura TSX / Honda Accord CL. Manual — part 240
3. Check for continuity between the terminals in each switch position according to the table.
Fig. 12: Power Mirror Switch Test Table
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Power Mirrors & Automatic Dimming Inside Mirror - TSX
Fig. 13: Defogger Switch Test Table (Canada)
4. If the continuity is not as specified, replace the power mirror switch.
POWER MIRROR ACTUATOR TEST
1. Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
2. Disconnect the 13P connector (A) from the power mirror actuator (B).
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Power Mirrors & Automatic Dimming Inside Mirror - TSX
Fig. 14: Disconnecting The 13P Connector From The Power Mirror Actuator
3. Check actuator operation by connecting power and ground according to the table.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Power Mirrors & Automatic Dimming Inside Mirror - TSX
Fig. 15: Power Mirror Actuator Test Table
4. If the mirror fails to work properly, replace the mirror actuator.
Defogger Test (Canada):
5. Check for continuity between the No. 2 and No. 7 terminals of the 13P connector. There should be
continuity with the defogger switch ON. If there is no continuity, check for an open circuit.
POWER MIRROR ACTUATOR REPLACEMENT
1. Remove the mirror holder (see MIRROR HOLDER REPLACEMENT ), power mirror (see POWER
MIRROR REPLACEMENT ), and disconnect the connector.
2. Cut the wire harness (A), tube (B) with cutter, and remove the clip (C).
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Power Mirrors & Automatic Dimming Inside Mirror - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст