Acura TSX / Honda Accord CL. Manual — part 499
firmly locked into place.
z
When installing the fuel gauge sending unit (C), make sure the connection is secure and the
connector is firmly locked into place. Be careful not to bend or twist it excessively.
4. Install the parts in the reverse order of removal with a new base gasket (D) and new O-rings (E). When
installing the fuel tank unit, align the marks on the unit and the fuel tank (see FUEL PUMP/FUEL
GAUGE SENDING UNIT REPLACEMENT ).
FUEL PUMP/FUEL GAUGE SENDING UNIT REPLACEMENT
Special Tools Required: Fuel sender wrench 07XAA-001010A
1. Relieve the fuel pressure (see FUEL PRESSURE RELIEVING ).
2. Remove the fuel fill cap.
3. Remove the trunk floor.
4. Remove the access panel (A) from the floor.
2004 Acura TSX
2004 ENGINES Fuel Supply System - TSX
2004 Acura TSX
2004 ENGINES Fuel Supply System - TSX
Fig. 45: Removing Access Panel
5. Disconnect the fuel pump 5P connector (B).
6. Disconnect the quick-connect fitting (C) from the fuel tank unit.
7. Using the special tool, loosen the fuel pump/sender assembly locknut (A).
Fig. 46: Removing Locknut
8. Remove the locknut (A) and the fuel pump/sender assembly.
2004 Acura TSX
2004 ENGINES Fuel Supply System - TSX
Fig. 47: Exploded View Of Fuel Pump/Fuel Gauge Sending Unit
2004 Acura TSX
2004 ENGINES Fuel Supply System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст