Acura TSX / Honda Accord CL. Manual — part 671
Fig. 97: Evaporator Temperature Sensor Test
2. Then pour warm water on the sensor, and check for a change in resistance.
3. Compare the resistance readings with the specifications shown in the graph; the resistance should be
within the specifications.
2004 Acura TSX
2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX
Fig. 98: Evaporator Temperature Sensor Resistance Graph
EVAPORATOR TEMPERATURE SENSOR REPLACEMENT
Disconnect the 2P connector (A) from the evaporator temperature sensor (B), then remove the connector clip
(C). Remove the self-tapping screw, and carefully pull out the evaporator temperature. Install the sensor in the
reverse order of removal.
2004 Acura TSX
2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX
Fig. 99: Removing Evaporator Temperature Sensor
POWER TRANSISTOR TEST
1. Disconnect the 4P connector from the power transistor.
2. Measure the resistance between the No. 3 and No. 4 terminals of the power transistor. It should be about
1.4-1.5 kohm.
z
If the resistance is within the specifications, go to step 3.
z
If the resistance is not within the specifications, replace the power transistor.
2004 Acura TSX
2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX
Fig. 100: Measuring The Resistance Between The No. 3 & No. 4 Terminals Of The Power
Transistor
3. Carefully release the lock tab on the No. 1 terminal (BLU/YEL) (A) in the 4P connector, then remove the
terminal and insulate it from body ground.
2004 Acura TSX
2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст