Acura TSX / Honda Accord CL. Manual — part 111
Fig. 110: Removing Glove Box
4. From the inside of the dash, gently push out on the front of the dashboard side cover (A) to release the
hooks (B), to remove the cover.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
Fig. 111: Removing Dashboard Side Cover
5. Remove the screw, then remove the glove box damper (A).
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
Fig. 112: Removing The Glove Box Damper
6. Install the glove box in the reverse order of removal.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
GLOVE BOX LOCK CYLINDER REPLACEMENT
1. Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
2. Insert a hooked-shaped tool in under the knob (A) while pulling it, and pull the top of the retainer (B) up.
Fig. 113: Pulling The Top Of The Retainer
NOTE:
Take care not to scratch the glove box.
NOTE:
Do not remove the retainer entirely. Leave the other side of it in the
original position when removing and installing the lock cylinder.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст