Acura TSX / Honda Accord CL. Manual — part 513

Fig. 18: Measuring Brush Length
Courtesy of AMERICAN HONDA MOTOR CO., INC.

OVERRUNNING CLUTCH TEST

1. While holding the drive gear (A), turn the gear shaft (B) clockwise. See Fig. 19 . Check that the drive

gear comes out to the other end. If the drive gear does not move smoothly, replace the gear cover
assembly.

2. While holding the drive gear, turn the gear shaft counterclockwise. The gear shaft should rotate freely. If

the gear shaft does not rotate smoothly, replace the gear cover assembly.

3. If the starter drive gear is worn or damaged, replace the overrunning clutch assembly; the gear is not

available separately. Check the condition of the torque converter ring gear to see if the teeth are damaged.

2004 Acura TSX

2004 STARTING & CHARGING SYSTEMS Starter - TSX

Fig. 19: Inspecting Overrunning Clutch
Courtesy of AMERICAN HONDA MOTOR CO., INC.

REMOVAL & INSTALLATION

STARTER

Removal

1. Ensure you have the anti-theft codes for the radio and the navigation system, write down the frequencies

for the radio's preset buttons.

2. Disconnect the battery negative cable. Disconnect the positive cable.

3. Remove the intake manifold cover. See Fig. 20 .

4. Disconnect the starter cable (A) from the "B" terminal. Disconnect the Black/White wire (B) from the "S"

terminal.

5. Remove the harness clamp (C). See Fig. 21 .

6. Remove the harness holder (D).

2004 Acura TSX

2004 STARTING & CHARGING SYSTEMS Starter - TSX

7. Remove the two bolts holding the starter. Remove the starter.

Fig. 20: Removing Intake Manifold Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2004 Acura TSX

2004 STARTING & CHARGING SYSTEMS Starter - TSX

Fig. 21: Removing Harness Clamp And Holder
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2004 Acura TSX

2004 STARTING & CHARGING SYSTEMS Starter - TSX