Acura MDX (2018 year). Manual — part 7

101

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the washer fluid is low.

●

Refill washer fluid.

2 Refilling Window Washer Fluid P. 592

●

Appears while you are customizing the settings and the
transmission is in other than

(

P.

2 Customized Features P. 126

●

Appears when the transmission system temperature is
too high. The vehicle does not operate properly.

●

You may find it difficult to accelerate, or to start the
vehicle on uphill.

●

Immediately stop in a safe place in

(

P.

●

Let the engine idle until the message disappears.

●

Appears if you depress the accelerator pedal when the
transmission is in

(

N.

●

Release the accelerator pedal.
After that, depress the brake pedal and change the
transmission position.

●

Appears when there is a problem with the sensor on the
battery.

●

Have your vehicle checked by a dealer.

2 Checking the Battery P. 611

●

Appears along with the battery charging system
indicator when the battery is not charging.

●

Turn off the climate control system and rear defogger to
reduce electricity consumption.

2 If the Charging System Indicator Comes On P. 653

18 ACURA MDX-31TZ56400.book 101 ページ ２０１７年８月２３日 水曜日 午後４時１分

102

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the scheduled maintenance is due soon.

●

Consequently, Maintenance Due Now and
Maintenance Past Due follow.

2 Maintenance Minder Messages on the Multi-

Information Display (MID) P. 578

●

Appears when the engine coolant temperature gets
abnormally high.

2 Overheating P. 651

●

Appears when there is a problem with the power
tailgate system.

●

Manually open or close the power tailgate.

●

Have your vehicle checked by a dealer.

U.S.

Canada

18 ACURA MDX-31TZ56400.book 102 ページ ２０１７年８月２３日 水曜日 午後４時１分

103

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears if there is a problem with the starter system.

●

Hold the ENGINE START/STOP button up to 15
seconds to start the engine.

2 Starting the Engine P. 465

Have your vehicle checked by a dealer.

●

Appears when you set the power mode to ACCESSORY
or ON.

2 Starting the Engine P. 465

●

Appears when the engine does not restart automatically
due to the following reason:

●

The hood is open.

●

There is a problem in the system that disables Auto Idle
Stop.

●

Follow the normal procedure to start the engine.

2 Starting the Engine P. 465

●

Close the hood.

●

Appears when the steering wheel is locked.

●

Move the steering wheel left and right while pressing
the ENGINE START/STOP button.

U.S.

Canada

Models with Auto Idle Stop

Models with Auto Idle Stop

Canadian models

18 ACURA MDX-31TZ56400.book 103 ページ ２０１７年８月２３日 水曜日 午後４時１分

104

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the power mode is in ACCESSORY.

—

●

Appears after the driver’s door is opened when the
power mode is in ACCESSORY.

●

Press the ENGINE START/STOP button twice with your
foot off the brake pedal to change the power mode to
VEHICLE OFF (LOCK).

●

Appears when you close the door with the power mode
is in ON without the keyless access remote inside the
vehicle.

●

Disappears when you bring the keyless access remote
back inside the vehicle and close the door.

2 Keyless Access Remote Reminder P. 171

●

Appears when the keyless access remote battery
becomes weak.

●

Replace the battery as soon as possible.

2 Replacing the Button Battery P. 613

●

Appears if the keyless access remote’s battery is too
weak to start the engine or the key is not within
operating range to start the engine.
The beeper sounds six times.

●

Bring the keyless access remote in front of the ENGINE
START/STOP button to be touched with.

2 If the Keyless Access Remote Battery is Weak P. 647

18 ACURA MDX-31TZ56400.book 104 ページ ２０１７年８月２３日 水曜日 午後４時１分

105

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when you attempt to put the transmission into
another gear position with the transmission in

(

P and

the engine OFF.

●

To select another gear position while in

(

P the engine

must be ON.

●

Appears when you try to change the gear position after
the position has automatically been changed to

(

P with

the driver’s door open and the driver’s seat belt
unfastened.

●

Press the

(

P button If you leave the vehicle.

●

Appears when the vehicle is stopped with the driver’s
seat belt unfastened and there is a chance that the
vehicle may roll unintentionally.

●

Press the

(

P button before release the brake pedal

when idling, parking or exiting the vehicle.

2 Shift Operation P. 474

●

Appears when the engine stops without the
transmission in

(

P, and does not restart automatically.

●

Appears if you open the hood while Auto Idle Stop
activates.

●

If you want to set the power mode to ON, put the
transmission into

(

P.

●

If you want to start the engine, follow the normal
procedure.

2 Starting the Engine P. 465

Models with Auto Idle Stop

Models with Auto Idle Stop

18 ACURA MDX-31TZ56400.book 105 ページ ２０１７年８月２３日 水曜日 午後４時１分

106

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears for a few seconds if you have not pressed the

(

N button long enough to initiate Neutral-Hold mode.

2 If you want to keep the transmission in

(

N

position [car wash mode] P. 476

●

Appears when you press and hold

(

N button for more

than 2 seconds.

●

Disappears when you set the gear position to other than

(

N.

2 If you want to keep the transmission in

(

N

position [car wash mode] P. 476

18 ACURA MDX-31TZ56400.book 106 ページ ２０１７年８月２３日 水曜日 午後４時１分

107

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when you try to change the gear position
without depressing the brake pedal.

●

Depress the brake pedal, then select a shift button.

●

Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.

●

Release your foot off the accelerator pedal, then select a
shift button.

●

Appears when the

(

P button is pressed while the

vehicle is moving.

●

Appears if you change the gear position to

(

R while the

vehicle is moving forward, or to

(

D while the vehicle is

reversing.

●

Make sure that the vehicle comes to a stop before
operating the select button.

●

Appears when you set the power mode to ON without
fastening the driver’s seat belt.

●

Appears when you change the gear position after

(

P

has been automatically selected with the driver’s door
open, the driver’s seat belt unfastened, then the brake
pedal is released.

●

Fasten the seat belt properly before you start to drive.

2 Shift Operation P. 474

●

Appears when you press the

(

P button but it is not

engaged due to low ATF temperature.

●

Depress the brake pedal until this message disappear.

18 ACURA MDX-31TZ56400.book 107 ページ ２０１７年８月２３日 水曜日 午後４時１分

108

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when pressing the Dynamic Mode button.

u

Press again to change the next mode.

2 Integrated Dynamics System P. 486

●

Appears if there is a problem with the cooling system.

●

Drive slowly to prevent overheating and have your
vehicle checked by a dealer as soon as possible.

●

Appears when there is a problem with the headlights.

●

Appears while driving - The headlights may not be
on. When conditions allow you to drive safety, have
your vehicle checked by a dealer as soon as possible.

●

Appears if there is a problem with the parking sensor
system

*

.

●

Check if the area around the sensor(s) is covered with
mud, ice, snow, etc. If the indicator(s) stays on or the
beeper does not stop even after you clean the area,
have the system checked by a dealer.

* Not available on all models

18 ACURA MDX-31TZ56400.book 108 ページ ２０１７年８月２３日 水曜日 午後４時１分

109

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears if the automatic brake hold is automatically
canceled while it is in operation.

●

Immediately depress the brake pedal.

●

Appears when the automatic brake hold system is
turned off.

2 Automatic Brake Hold P. 532

●

Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.

●

Fasten the driver’s seat belt.

2 Automatic Brake Hold P. 532

●

Appears when the automatic brake hold button is
pressed without depressing the brake pedal while the
automatic brake hold is in operation.

●

Press the automatic brake hold button with the brake
pedal depressed.

2 Automatic Brake Hold P. 532

●

Appears when the parking brake is applied
automatically while it is in operation.

2 Automatic Brake Hold P. 532
2 Parking Brake P. 528

18 ACURA MDX-31TZ56400.book 109 ページ ２０１７年８月２３日 水曜日 午後４時１分

110

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears if there is a problem with the Auto high-beam.

●

Manually operate the headlight switch.

●

If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.

●

Appears when the Auto high-beam is in operation, or
the headlight switch is turned in AUTO, but there the
temperature inside the camera is too high. The Auto
high-beam cancels automatically.

●

Use the climate control system to cool down the
camera.

●

Goes off - The camera has been cooled down. Turing
the headlight switch in AUTO can resume the system.

2 Front Sensor Camera P. 487

●

Appears when the area around the camera is blocked
by dirt, mud, etc. Stop your vehicle in a safe place, and
wipe it off with a soft cloth.

●

May appear when driving in bad weather (rain, snow,
fog, etc.)

●

Have your vehicle checked by a dealer if the message
comes back on after you cleaned the area around the
camera.

18 ACURA MDX-31TZ56400.book 110 ページ ２０１７年８月２３日 水曜日 午後４時１分

111

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Flashes when the system senses a likely collision with a
vehicle in front of you.

●

Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)

2 Collision Mitigation Braking System

TM

(CMBS

TM

)

P. 536

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears when ACC with LSF has been automatically
canceled.

●

You can resume the set speed after the condition that
caused ACC with LSF to cancel improves. Press the RES/
+/SET/– switch up.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears when the vehicle speed slows down to 25 mph
(40 km/h) and the vehicle ahead of you goes out of the
ACC with LSF range while ACC with LSF is in operation.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears when pressing the RES/+/SET/– switch down
while the vehicle speed is less than 25 mph (40 km/h)
and the vehicle ahead of you goes out of the ACC with
LSF range.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears when the distance between your vehicle and
the vehicle ahead of you is too close while ACC with LSF
is in operation.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

18 ACURA MDX-31TZ56400.book 111 ページ ２０１７年８月２３日 水曜日 午後４時１分

112

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when pressing the RES/+/SET/– switch down
while the distance between your vehicle and the vehicle
ahead of you is too close.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears when pressing the RES/+/SET/– switch down
while the driver’s seat belt is unfastened.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears when pressing the RES/+/SET/– switch down
while the transmission is not in

(

D.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears if ACC with LSF is canceled while your vehicle
is automatically stopped by ACC with LSF. The beeper
sounds.

●

Immediately depress the brake pedal.

●

Appears when pressing the RES/+/SET/– switch down
while the vehicle is moving and the brake pedal is
depressed.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

18 ACURA MDX-31TZ56400.book 112 ページ ２０１７年８月２３日 水曜日 午後４時１分

113

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the vehicle is stopped on a very steep
slope while ACC with LSF is in operation.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears when pressing the RES/+/SET/– switch down
while the vehicle is stopped on a very steep slope.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

●

Appears when pressing the RES/+/SET/– switch down
while the parking brake is applied.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed

Follow (LSF) P. 489

2 Parking Brake P. 528

18 ACURA MDX-31TZ56400.book 113 ページ ２０１７年８月２３日 水曜日 午後４時１分

114

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when you unlock and open the driver’s door
while the engine is running by two-way keyless access
remote.

2 Remote Engine Start with Vehicle Feedback

*

P. 467

Models with two-way keyless access remote

* Not available on all models

18 ACURA MDX-31TZ56400.book 114 ページ ２０１７年８月２３日 水曜日 午後４時１分

115

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the vehicle is driving out of a detected
lane. Rapid vibrations on the steering wheel.

●

Appears when the vehicle is driving out of a detected
lane.

- Rapid vibrations on the steering wheel when the

vehicle is drifting out of a detected lane.

- Rapid vibrations on the steering wheel with steering

assist when the vehicle is drifting out of a detected
lane.

●

Keep the vehicle within the lane you are driving.

●

The color of either line changes from white to amber as
the vehicle gets closer to that side of the lane line.

2 Lane Keeping Assist System (LKAS) P. 509
2 Road Departure Mitigation (RDM) System P. 504

●

Blinks when you fail to steer the vehicle. The beeper
sounds simultaneously if selected by customization.

●

Operate the steering wheel to resume the LKAS.

Lane Keeping Assist System (LKAS)

Road Departure Mitigation (RDM) System

When you selected Warning Only

When you selected Normal or Wide

18 ACURA MDX-31TZ56400.book 115 ページ ２０１７年８月２３日 水曜日 午後４時１分

116

uu

Indicators

u

Multi-Information Display (MID) Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a system
related to the LKAS. The LKAS cancels automatically.
The beeper sounds simultaneously if selected by
customization.

●

If any other system indicators come on, such as the
VSA®, ABS and brake system, take appropriate action.

2 Indicators P. 78

●

Appears when the LKAS is in operation, or the LKAS
button is pressed, but there the temperature inside the
LKAS camera is too high. The LKAS cancels
automatically. The beeper sounds simultaneously if
selected by customization.

●

Use the climate control system to cool down the
camera.

●

Goes off - The camera has been cooled down. Pressing
the LKAS button can resume the system.

2 Front Sensor Camera P. 487

●

Appears when the area around the camera is blocked
by dirt, mud, etc. Stop your vehicle in a safe place, and
wipe it off with a soft cloth.

●

May appear when driving in bad weather (rain, snow,
fog, etc.)

●

Have your vehicle checked by a dealer if the indicator
and message come back on after you cleaned the area
around the camera.

18 ACURA MDX-31TZ56400.book 116 ページ ２０１７年８月２３日 水曜日 午後４時１分