RAM 1500 (2022 year). Manual in english — page 17

MULTIMEDIA

267

SiriusXM® Satellite Radio Mode —

If Equipped

Uconnect 3 With 5-inch Display Changing To SiriusXM®

SiriusXM® Satellite Radio uses direct

satellite-to-receiver broadcasting technology to

provide clear, coast-to-coast radio content.

SiriusXM® is a subscription-based service.
Visit

siriusxm.com/getallaccess

or review your

SiriusXM® Radio pamphlet in your Owner’s

Manual kit for more information.

SiriusXM® services require subscriptions, sold

separately after the trial included with the new

vehicle purchase. If you decide to continue your

service at the end of your trial subscription, the

plan you choose will automatically renew and bill at

then-current rates until you call SiriusXM® at

866-635-2349 to cancel. See SiriusXM®

Customer Agreement for complete terms at

www.siriusxm.com

(US) or

www.siriusxm.ca

(Canada).
All fees and programming subject to change.

SiriusXM® satellite service is available only to

those at least 18 and older in the 48 contiguous

US and D.C. Our SiriusXM® satellite service is also

available in Canada and Puerto Rico (with

coverage limitations). SiriusXM® Internet radio

service is available throughout their satellite

service area and in AK. © 2021 SiriusXM® Radio

Inc. SiriusXM® and all related marks and logos are

trademarks of SiriusXM® Radio Inc.

This functionality is only available for radios

equipped with a Satellite receiver. In order to

receive satellite radio, the vehicle needs to be

outside with a clear view to the sky.
If the screen shows “Acquiring Signal”, you might

have to change the vehicle’s position in order to

receive a signal. In most cases, the satellite radio

does not receive a signal in underground parking

garages or tunnels.
No Subscription
Radios equipped with a Satellite receiver require a

subscription to the SiriusXM® Service. When the

radio does not have the necessary subscription,

the radio is able to receive the Preview channel

only.

5

268

MULTIMEDIA

Acquiring SiriusXM® Subscription
To activate the SiriusXM® Satellite Radio

subscription, US residents visit

http://

www.siriusxm.com/getallaccess

or call:

1-800-643-2112
Canadian residents visit

https://

www.siriusxm.ca/

or call: 1-888-539-7474.

NOTE:

You will need to provide the SiriusXM® ID (RID)

located at the bottom of the Channel 0 screen.
The Satellite Mode is activated by a press of the

SXM button on the touchscreen.

When in Satellite Mode:



The SXM button on the touchscreen is high

-

lighted.



The SiriusXM® Presets are displayed at the top

of the screen.



The SiriusXM® Channel Number is displayed in

the center.



The Program Information is displayed at the

bottom of the Channel Number.



The SiriusXM® function buttons are displayed

below the Program Information.

Tuning is done by operating the Tune Knob or by

Direct Tune, similar to other Radio Bands.
In addition to the tuning operation functions

common to all radio modes, the Replay, Traffic/

Weather button, and Favorite button functions are

available in SiriusXM® Mode.

Uconnect 3 With 5-inch Display SiriusXM® Satellite Radio

1 — Browse
2 — Radio Bands
3 — Direct Tune
4 — Info Button
5 — Next Button

MULTIMEDIA

269

REPLAY

Replay provides a means to store and replay up to 22 minutes of music audio and 48 minutes of talk radio. Once the channel is switched, content in replay

memory is lost.
Press the Replay button on the touchscreen. The Play/Pause, Rewind/Forward and Live buttons will display at the top of the screen, along with the replay time.
You can exit by pressing the Replay button on the touchscreen any time during the Replay Mode.

Play/Pause

Press the Pause/Play button on the touchscreen to

pause the playing of live or rewound content at any

time. Play can be resumed by pressing the Pause/

Play button again on the touchscreen.

Rewind

Press the Rewind button on the touchscreen to

rewind the content in steps of five seconds.

Pressing the Rewind button on the touchscreen for

more than two seconds rewinds the content. The

radio begins playing the content at the point at

which the press is released.

Forward

Each press of the Forward button on the

touchscreen forwards the content in steps of five

seconds. Forwarding of the content can only be

done when the content is previously rewound, and

therefore, cannot be done for live content. A

continuous press of the Forward button on the

touchscreen also forwards the content. The radio

begins playing the content at the point at which the

press is released.

Live

Press the Live button on the touchscreen to

resume the playing of live content.

5

270

MULTIMEDIA

FAVORITES

Press the Favorites button on the touchscreen to

activate the favorites menu, which will time out

within 20 seconds in absence of user interaction.
You can exit the Favorites Menu by a press of the X

button.
The Favorites feature enables you to set a favorite

artist or song that is currently playing. The radio

then uses this information to alert you when either

the favorite artist or song is being played at any

time by any of the SiriusXM® Channels.
The maximum number of favorites that can be

stored in the Radio is 50.
Favorite Artist: While the song is playing, to set a

favorite artist, press the Favorites button on the

touchscreen and then the Favorite Artist button on

the touchscreen.
Favorite Song: While the song is playing, to set a

favorite song, press the Favorites button on the

touchscreen and then the Favorite Song button on

the touchscreen.

BROWSE IN SXM

Press the Browse button on the touchscreen to

edit Presets, Favorites, Game Zone, and Jump

settings, along with providing the SiriusXM®

Channel List.

This Screen contains many submenus. You can

exit submenus to return to a parent menu by

pressing the Back arrow.
All
Press the All button on the Browse Screen. When

pressing the All button, the following categories

become available:



Channel List: Press the Channel List to display

all the SiriusXM® Channel Numbers. You can

scroll the Channel List by pressing the Up and

Down arrows, located on the right side of the

screen. Scrolling can also be done by operating

the TUNE/SCROLL knob.



Genre List: Press the Genre button on the touch

-

screen to display a list of Genres. You can select

any desired Genre by pressing the Genre List.

The radio tunes to a channel with the content in

the selected Genre.

Favorites
Press the Favorites button on the Browse screen.
The Favorites menu provides a means to edit the

Favorites list and to configure the Alert Settings,

along with providing a list of Channels currently

airing any of the items in the Favorites list.
You can scroll the Favorites list by pressing the Up

and Down arrows located at the right side of the

screen. Scrolling can also be done by operating the

TUNE/SCROLL knob as well.

Remove Favorites
Press the Remove Favorites tab at the top of the

screen. Press the Delete All button on the

touchscreen to delete all of the Favorites or press

the Trash Can icon next to the Favorite to be

deleted.
Alert Settings
Press the Alert Settings tab at the top of the

Favorites screen. The Alert Settings menu allows

you to choose from a visual alert or audible and

visual alert when one of your favorites is airing on

any of the SiriusXM® channels.
Game Zone
Press the Game Zone button, located at the left of

the Browse screen. This feature provides you with

the ability to select teams, edit the selection, and

set alerts.
On-Air
Press the On-Air tab at the top of the screen. The

On-Air list provides a list of Channels currently

airing any of the items in the Selections list, and

pressing any of the items in the list tunes the radio

to that channel.

MULTIMEDIA

271

Add/Delete — If Equipped
Press the Add/Delete button on the touchscreen to

activate the League Scroll list. Press the chosen

league and a scroll list of all teams within the

league will appear, then you can select a team by

pressing the corresponding box. A check mark

appears for all teams that are chosen.
Remove Selection/Trash Can Icon
Press the Remove Selection tab at the top of the

screen. Press the Delete All button on the

touchscreen to delete all of the selections or press

the Trash Can icon next to the selection to be

deleted.
Alert Settings
Press the Alert Setting tab at the top of the screen.

The Alert Settings menu allows you to choose from

“Alert me to on-air games upon start” or “Alert

upon score update” or both when one or more of

your selections is airing on any of the SiriusXM®

channels.

Tune Start
Tune Start begins playing the current song from

the beginning when you tune to a music channel

using one of the 12 presets. This feature occurs

the first time the preset is selected during that

current song.

Setting Presets

Uconnect 3 With 5-inch Display Radio Presets

The Presets are available for all Radio Modes, and

are activated by pressing any of the Preset

buttons, located at the top of the screen.

When you are on a station that you wish to save as

a preset, press and hold the numbered button on

the touchscreen for more than two seconds.
The Radio stores up to 12 presets in each of the

Radio Modes.
For the Uconnect 3 With 5-inch Display
A set of four presets will appear on the screen.

Press the All button to view all saved presets. To

remove a saved preset, a new preset must be

saved over the old one.

Audio Settings

Press the Audio button within the settings main

menu to activate the Audio Settings screen.

Uconnect 3 With 5-inch Display

5

272

MULTIMEDIA

Audio Setting

Description

Balance/Fade

Press the Balance/Fade button on the touchscreen to balance audio between

the front speakers or fade the audio between the rear and front speakers.

Press the Front, Rear, Left or Right button or press and drag the red Speaker

icon to adjust the Balance/Fade.

Equalizer

Press the + or – button or press and drag the level bar to increase or decrease

each of the equalizer bands. The level value, which spans between plus or

minus nine, is displayed at the top of each of the bands.

Speed Adjusted Volume

The Speed Adjusted Volume is adjusted by selecting from “Off”, “1”, “2”, and

“3”. This alters the automatic adjustment of the audio volume with variation

to vehicle speed. Volume increases automatically as speed increases to

compensate for normal road noise.

Surround Sound — If Equipped

When Surround Sound is on, you can hear audio coming from every direction

as in a movie theatre or home theatre system.

Loudness — If Equipped

When Loudness is on, the sound quality at lower volumes improves.

AUX Volume Offset

The AUX Volume Offset is adjusted by pressing + and – buttons. This alters the

AUX input audio volume. The level value, which spans between plus or minus

three, is displayed above the adjustment bar.

Auto Play — If Equipped

The Auto Play feature begins playing music as soon as a USB Media device is

connected to one of the vehicle’s Media USB ports, when it is turned on. Press

“Off” to turn the setting off.

Radio Off With Door — If Equipped

The Radio Off With Door feature, when activated, keeps the radio on until the

driver or passenger door is opened or until the Radio Off Delay selected time

has expired.

MULTIMEDIA

273

M

EDIA

M

ODE

Operating Media Mode

Uconnect 3 With 5-inch Display Operating Media Mode

Media Mode is entered by pushing the MEDIA

button located on the faceplate.

Audio Source Selection

Once in Media Mode, press the Source or Source

Select button on the touchscreen and the desired

mode button on the touchscreen. USB, AUX, and

Bluetooth® are the Media sources available.

When available, you can select the Browse button

on the touchscreen to be given these options:



Now Playing



Artists



Albums



Genres



Songs



Playlists



Folders

For the Uconnect 3 With 5-inch Display, Media

Mode is entered by pushing the MEDIA button

located on the faceplate.

Types of Media Modes

USB MODE

Overview
USB Mode is entered by inserting a USB device into

the USB port, or by pushing the MEDIA button on

the faceplate and then selecting the USB button.

On the Uconnect 3 With 5-inch Display, if you insert

a USB device with the ignition in ON/RUN, the unit

will switch to USB Mode and begin to play. The

display will show the track number and index time

in minutes and seconds. Play will begin at the start

of track 1.

BLUETOOTH® MODE

Overview
Bluetooth® Streaming Audio or Bluetooth® Mode

is entered by pairing a Bluetooth® device,

containing music, to the Uconnect system.
Before proceeding, the Bluetooth® device must be

paired to the Uconnect Phone to communicate

with the Uconnect system.
On the Uconnect 3 With 5-inch Display, push the

MEDIA button located on the faceplate. Once in

Media Mode, press the Source button on the

touchscreen and select the Bluetooth® button

Ú

page 275.

To access Bluetooth® Mode, press the Bluetooth®

button on the left side of the touchscreen or under

the Source Select/Select Source button (if

equipped).

1 — Seek Down
2 — Browse
3 — Source
4 — Pause/Play
5 — Info
6 — More Options
7 — Seek Up

5

274

MULTIMEDIA

AUX MODE

Overview
Auxiliary Mode (AUX) is entered by inserting an AUX

device using a cable with a 3.5 mm audio jack into

the AUX port, or by pushing the MEDIA button on

the faceplate, selecting the Source button and

then the AUX button.
To insert an Auxiliary device, gently insert the

Auxiliary device cable into the AUX port. If you

insert an Auxiliary device with the ignition and the

radio on, the unit will switch to AUX Mode and

begin to play.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting

playlists, play, fast forward, etc.) cannot be

provided by the radio; use the device controls

instead. Adjust the volume with the Volume button,

Volume/Mute rotary knob, or the On/Off rotary

knob, or with the volume of the attached device.

NOTE:

The radio unit is acting as the amplifier for audio

output from the Auxiliary device. Therefore, if the

volume control on the Auxiliary device is set too

low, there will be insufficient audio signal for the

radio unit to play the music on the device.

Seek Up /Seek Down
In USB Mode, press the Seek Up button on the

touchscreen for the next selection on the USB

device. Press and release the Seek Down button

on the touchscreen to return to the beginning of

the current selection, or to return to the beginning

of the previous selection if the USB device is within

the first three seconds of the current selection.
In Bluetooth® Mode, press and release the Seek

Up button on the touchscreen for the next

selection on the Bluetooth® device. Press and

release the Seek Down button on the touchscreen

to return to the beginning of the current selection,

or return to the beginning of the previous selection

if the Bluetooth® device is within the first second

of the current selection.
Browse
In USB Mode, press the Browse button on the

touchscreen to display the browse window. In USB

Mode, the left side of the browse window displays

a list of ways you can browse through the contents

of the USB device. If supported by the device, you

can browse by Folder, Artist, Playlist, Album, Song,

etc. Press the desired button on the touchscreen

on the left side of the screen. The center of the

browse window shows items and their

sub-functions, which can be scrolled through by

pressing the Up and Down buttons to the right. The

TUNE/SCROLL knob can also be used to scroll.

On the Uconnect 3 With 5-inch Display, rotate the

BROWSE button on the faceplate or press the

Browse button on the touchscreen to scroll

through and select a desired track on the device.

Press the Exit button on the touchscreen if you

wish to cancel the Browse function.
Media Mode
In USB Mode, press the Media button on the

touchscreen to select the desired audio source:

USB.
In Bluetooth® Mode, press the Media button on

the touchscreen to select the desired audio

source: Bluetooth®.
In AUX Mode, press the Media button on the

touchscreen to select the desired audio source:

AUX.
Repeat
In USB Mode, press the Repeat button on the

touchscreen to toggle the repeat functionality. The

Repeat button on the touchscreen is highlighted

when active. The Radio will continue to play the

current track, repeatedly, as long as the repeat is

active. Press the Repeat button again to enter

Repeat All. The radio will continue to play all the

current tracks, repeatedly, as long as the repeat

function is active. To cancel Repeat, press the

Repeat button a third time.

MULTIMEDIA

275

Shuffle
In USB Mode, press the Shuffle button on the

touchscreen to play the selections on the USB

device in random order to provide an interesting

change of pace. Press the Shuffle button on the

touchscreen a second time to turn this feature off.
Audio
Audio settings can be accessed by pressing the

Audio button

Ú

page 265.

Info
In USB Mode, press the Info button on the

touchscreen to display the current track

information. Press the Info or X button on the

touchscreen a second time to cancel this feature.
Tracks
In USB Mode, press the Tracks button on the

touchscreen to display a pop-up with the Song List.

The song currently playing is indicated by an arrow

and lines above and below the song title. When in

the Tracks List screen you can rotate the TUNE/

SCROLL knob to highlight a track (indicated by the

line above and below the track name) and then

push the ENTER/BROWSE knob to start playing

that track.

In Bluetooth® Mode, if the Bluetooth® device

supports this feature, press the Tracks button on

the touchscreen to display a pop-up with the Song

List. The currently playing song is indicated by a red

arrow and lines above and below the song title.
Pressing the Tracks button on the touchscreen

while the pop-up is displayed will close the pop-up.

MEDIA VOICE COMMANDS

Uconnect offers connections via USB, Bluetooth®,

and auxiliary (AUX) ports. Voice operation is only

available for connected USB and AUX devices.
Push the VR button located on the steering

wheel. After the beep, say one of the following

commands and follow the prompts to switch your

media source or choose an artist:



“Change source to Bluetooth®”



“Change source to AUX”



“Change source to USB”



“Play artist Beethoven”; “Play album Greatest

Hits”; “Play song Moonlight Sonata”; “Play genre

Classical”

Did You Know: Press the Browse button on the

touchscreen to see all of the music on your USB

device. Your Voice Command must match exactly

how the artist, album, song, and genre information

is displayed.

P

HONE

M

ODE

Overview

Uconnect Phone is a voice-activated, hands-free,

in-vehicle communications system. It allows you to

dial a phone number with your mobile phone.
The feature supports the following:
Voice Activated Features



Hands-Free dialing via Voice (“Call John Smith

Mobile” or “Dial 248-555-1212”).



Hands-Free text-to-speech listening of your

incoming SMS messages.



Hands-Free Text Message Replying: Forward

one of 18 predefined SMS messages to

incoming calls/text messages.



Redialing last dialed numbers (“Redial”).



Calling Back the last incoming call number

(“Call Back”).



Viewing call logs on screen (“Show Incoming

Calls,” “Show Outgoing Calls,” “Show Missed

Calls,” or “Show Recent Calls”).



Searching Contacts phone number (“Search for

John Smith Mobile”).

5

276

MULTIMEDIA

Screen Activated Features



Dialing via Keypad using touchscreen.



Viewing and Calling contacts from Phonebooks

displayed on the touchscreen.



Setting Favorite Contact phone numbers so they

are easily accessible on the Main Phone screen.



Viewing and Calling contacts from Recent Call

logs.



Reviewing your recent Incoming SMS

Messages.



Pairing up to 10 phones/audio devices for easy

access to connect to them quickly.

NOTE:

Your phone must be capable of SMS messaging via

Bluetooth® for messaging features to work

properly.
Your mobile phone’s audio is transmitted through

your vehicle’s audio system; the system will

automatically mute your radio when using the

Uconnect Phone.
For Uconnect customer support:



US visit

UconnectPhone.com

or call

877-855-8400



Canada visit

UconnectPhone.com

or call

800-465-2001 (English) or (French) call

800-387-9983

Uconnect Phone allows you to transfer calls

between the system and your mobile phone as you

enter or exit your vehicle and enables you to mute

the system's microphone for private conversation.

The Phone feature is driven through your

Bluetooth® “Hands-Free Profile” mobile phone.

Uconnect features Bluetooth® technology — the

global standard that enables different electronic

devices to connect to each other without wires or a

docking station. Ensure you phone is turned on

with Bluetooth® active and has been paired to the

Uconnect system. Up to 10 mobile phones or audio

devices are allowed to be linked to the system.

Only one linked (or paired) mobile phone and one

audio device can be used with the system at a

time.

Phone Button

The Phone button on your steering wheel

is used to get into the Phone Mode and

make calls, show recent, incoming or

outgoing calls, view phonebook, etc.

When you push the button you will hear a BEEP.

The BEEP is your signal to give a command.
Voice Command Button

The Voice Command button on your

steering wheel is only used for “barge in”

and when you are already in a call or

want to make another call.

The button on your steering wheel is also used to

access the Voice Commands for the Uconnect

Voice Command features if your vehicle is

equipped.

Phone Operation

OPERATION

Voice commands can be used to operate the

Uconnect Phone and to navigate its menu

structure. Voice commands are required after

most Uconnect Phone prompts. There are two

general methods for how Voice Command works:
1. Say compound commands like “Call John

Smith mobile”.

2. Say the individual commands and allow the

system to guide you to complete the task.

WARNING!

ALWAYS drive safely with your hands on the

steering wheel. You have full responsibility and

assume all risks related to the use of the

Uconnect features and applications in this

vehicle. Only use Uconnect when it is safe to do

so. Failure to do so may result in an accident

involving serious injury or death.

MULTIMEDIA

277

You will be prompted for a specific command and

then guided through the available options.



Prior to giving a voice command, one must wait

for the beep, which follows the “Listen” prompt

or another prompt.



For certain operations, compound commands

can be used. For example, instead of saying

“Call” and then “John Smith” and then “mobile”,

the following compound command can be said:

“Call John Smith mobile.”



For each feature explanation in this section,

only the compound command form of the voice

command is given. You can also break the

commands into parts and say each part of the

command when you are asked for it. For

example, you can use the compound command

form voice command “Search for John Smith,”

or you can break the compound command form

into two voice commands: “Search Contacts”

and when asked, “John Smith.” Please

remember, the Uconnect Phone works best

when you talk in a normal conversational tone,

as if speaking to someone sitting a few feet/

meters away from you.

NATURAL SPEECH

Your Uconnect Phone Voice system uses a Natural

Language Voice Recognition (VR) engine.
Natural speech allows the user to speak

commands in phrases or complete sentences. The

system filters out certain non-word utterances and

sounds such as “ah” and “eh.” The system handles

fill-in words such as “I would like to”.
The system handles multiple inputs in the same

phrase or sentence such as “make a phone call”

and “to Kelly Smith”. For multiple inputs in the

same phrase or sentence, the system identifies

the topic or context and provides the associated

follow-up prompt such as “Who do you want to

call?” in the case where a phone call was

requested but the specific name was not

recognized.
The system utilizes continuous dialog. When the

system requires more information from the user, it

will ask a question to which the user can respond

without pushing the Voice Command button on the

steering wheel.

HELP COMMAND

If you need assistance at any prompt, or if you want

to know your options at any prompt, say “Help”

following the beep.
To activate the Uconnect Phone from idle, simply

push the Phone button (if active) on your steering

wheel and say a command or say “Help”. All Phone

sessions begin with a push of the VR button or the

Phone button.

CANCEL COMMAND

At any prompt, after the beep, you can say “Cancel”

and you will be returned to the main menu.
You can also push the VR button or Phone button

on your steering wheel when the system is listening

for a command and be returned to the main or

previous menu.

PAIR (LINK) UCONNECT PHONE TO A MOBILE

PHONE

Use this QR code to access your

digital experience.
To begin using your Uconnect

Phone, you must pair your

compatible Bluetooth®-enabled

mobile phone. Mobile phone

pairing is the process of

establishing a wireless connection between a

cellular phone and the Uconnect system.

5

278

MULTIMEDIA

To complete the pairing process, you will need to

reference your mobile phone’s manual. Please

visit

UconnectPhone.com

for complete mobile

phone compatibility information.

Uconnect 3 With 5-inch Display

NOTE:



You must have Bluetooth® enabled on your

phone to complete this procedure.



The vehicle must be in PARK or at a standstill.

Follow the steps below to pair your phone:
1. Place the ignition in the ACC or ON/RUN

position.

2. Press the Phone button.

NOTE:



If there are no phones currently connected

with the system, a pop-up will appear asking

if you would like to pair a mobile phone.



This pop-up only appears when the user

enters Phone Mode and no other device(s)

have previously been paired. If the system

has a phone previously paired, even if no

phone is currently connected with the

system, this pop-up will not appear.

3. Select “Yes” to begin the pairing process.
4. Search for available devices on your

Bluetooth®-enabled mobile phone.



Press the Settings button on your mobile

phone.



Select “Bluetooth®” and ensure it is

enabled. Once enabled, the mobile phone

will begin to search for Bluetooth® connec

-

tions.

NOTE:

During the pairing procedure, you may receive a

pop-up on your touchscreen asking you to make

sure the PIN on the touchscreen matches the PIN

from the pop-up on your mobile phone.

5. If “No” is selected, and you still would like to

pair a mobile phone, press the Phone Pairing

or Settings button from the Uconnect Phone

main screen.



Press the Paired Phones button or the Add

Device button.



Search for available devices on your Blue

-

tooth®-enabled mobile phone (see below).

When prompted on the phone, select

“Uconnect” and accept the connection

request.

6. Uconnect Phone will display an in-progress

screen while the system is connecting.

7. When your mobile phone finds the Uconnect

system, select “Uconnect.”

8. When prompted on the mobile phone, accept

the connection request from Uconnect.

9. When the pairing process has successfully

completed, the system will prompt you to

choose whether or not this is your favorite

phone. Selecting “Yes” will make this phone

the highest priority. This phone will take

precedence over other paired phones within

range and will connect to the Uconnect system

automatically when entering the vehicle. Only

one mobile phone and/or one Bluetooth®

audio device can be connected to the

Uconnect system at a time.

MULTIMEDIA

279

If “No” is selected, simply select “Uconnect”

from the mobile phone/audio device

Bluetooth® screen, and the Uconnect system

will reconnect to the Bluetooth® device.

NOTE:

For phones which are not made a favorite, the

phone priority is determined by the order in which

it was paired. The most recent phone paired will

have the higher priority.

NOTE:

During the pairing procedure, you may receive a

pop-up on your mobile phone for the Uconnect

system to access your “messages” and “contacts”.

Selecting “Ok” or “Allow” will sync your contacts

with the Uconnect system.
You can also use the following VR command to

bring up the Paired Phone screen from any screen

on the radio:



“Show Paired Phones”

NOTE:

Software updates on your phone or the Uconnect

system may interfere with the Bluetooth®

connection. If this happens, simply repeat the

pairing process. However, first make sure to delete

the device from the list of phones on your

Uconnect system. Next, be sure to remove

Uconnect from the list of devices in your phone’s

Bluetooth® settings.

CONNECTING TO A PARTICULAR MOBILE

PHONE OR AUDIO DEVICE AFTER PAIRING

Uconnect Phone will automatically connect to the

highest priority paired phone and/or Audio Device

within range. If you need to choose a particular

phone or audio device follow these steps:
1. Press the Settings button on the touchscreen.
2. Press the Paired Phones or Audio Sources

button.

3. Press to select the particular phone or the

particular audio device. A pop-up menu will

appear; press “Connect Phone”.

4. Press the X to exit out of the Settings screen.

DISCONNECTING OR DELETING A PHONE OR

AUDIO DEVICE

Uconnect 3 With 5-inch Display

1. Press the Uconnect Phone Pairing or Settings

button.

2. Press the Paired Phones or Audio Sources

button.

3. Press the Settings button located to the right

of the device name for a different phone or

audio device than the currently connected

device or press the preferred Connected

Phone from the list.

4. The option’s pop-up will be displayed.
5. Press the Disconnect Device or the Delete

Device button on the touchscreen.

6. Press the X to exit out of the Settings screen.

MAKING A PHONE OR AUDIO DEVICE A

FAVORITE

1. On the Paired Phone/Audio Sources screen,

press the Settings button located to the right

of the device name for a different phone or

audio device than the currently connected

device or press the preferred “Connected

Phone” from the list.

2. The option’s pop-up will be displayed.
3. Press the Make Favorite button on the

touchscreen; you will see the chosen device

move to the top of the list.

4. Press the X to exit out of the Settings screen.

5

280

MULTIMEDIA

PHONEBOOK DOWNLOAD (AUTOMATIC

PHONEBOOK TRANSFER FROM MOBILE

PHONE) — IF EQUIPPED

If supported by your phone, Uconnect Phone has

the ability to download contact names and number

entries from the mobile phone’s phonebook.

Specific Bluetooth® Phones with Phonebook

Access Profile may support this feature. Your

mobile phone may receive a pop-up asking for

permission for the Uconnect system to access your

messages and contacts. Selecting “Ok” or “Allow”

will sync your contacts with the Uconnect system.
See the Uconnect website,

UconnectPhone.com

,

for supported phones.



To call a name from a downloaded mobile

phonebook,

Ú

page 284.



Automatic download and update of a phone

-

book, if supported, begins as soon as the Blue

-

tooth® wireless phone connection is made to

the Uconnect Phone, for example, after you start

the vehicle.



A maximum of 5,000 contact names with four

numbers per contact will be downloaded and

updated every time a phone is connected to the

Uconnect Phone.



Depending on the maximum number of entries

downloaded, there may be a short delay before

the latest downloaded names can be used. Until

then, if available, the previously downloaded

phonebook is available for use.



Only the phonebook of the currently connected

mobile phone is accessible.



This downloaded phonebook cannot be edited

or deleted on the Uconnect Phone. These can

only be edited on the mobile phone. The

changes are transferred and updated to Ucon

-

nect Phone on the next phone connection.

MANAGING YOUR FAVORITES — IF EQUIPPED

There are two ways you can add an entry to your

favorites:
1. After loading the mobile phonebook, press

the Favorites button on the touchscreen, and

then press one of the +Add Favorite Contact

buttons that appears on the list.

2. After loading the mobile phonebook, select

“Contacts” from the Phone main screen, and

then select the appropriate number. Press the

Down Arrow button or the Settings Gear button

next to the selected number to display the

option’s pop-up. In the pop-up, select “Add to

Favorites”.

NOTE:

If the Favorites list is full, you will be asked to

remove an existing favorite.

TO REMOVE A FAVORITE — IF EQUIPPED

1. To remove a Favorite, select “Favorites” from

the Phone main screen.

2. Next, select the Down Arrow icon or the

Settings Gear icon next to the contact you want

to remove from your favorites. This will bring

up the options for that Favorite contact.

3. Deselect the Star icon to delete the Favorite.

Phone Call Features

The following features can be accessed through

the Uconnect Phone if the feature(s) are available

and supported by Bluetooth® on your mobile

service plan. For example, if your mobile service

plan provides three-way calling, this feature can be

accessed through the Uconnect Phone. Check with

your mobile service provider for the features that

you have.
Listed below are the phone options with Uconnect:



Redial



Dial by pressing in the number



Voice Commands (Dial by Saying a Name, Call

by Saying a Phonebook Name, Redial or Call

Back)

MULTIMEDIA

281



Favorites



Mobile Phonebook



Recent Call Log



SMS Message Viewer

CALL CONTROLS

The touchscreen allows you to control the following

call features:

Uconnect 3 With 5-inch Display

Other phone call features include:



End Call



Hold/Unhold/Resume



Swap two active calls

KEY PAD NUMBER ENTRY

1. Press the Phone button.
2. Press the Dial/Keypad button on the

touchscreen.

3. The Touch-Tone screen will be displayed.
4. Use the numbered buttons on the

touchscreens to enter the number and press

“Dial/Call”.

RECENT CALLS — IF EQUIPPED

You may browse a list of the most recent of each of

the following call types:



All Calls



Incoming Calls or Calls Received



Outgoing Calls or Calls Made



Missed Calls

These can be accessed by pressing the Recent

Calls button on the phone main screen.
You can also push the VR button on your steering

wheel and perform the above operation. For

example, say “Show my incoming calls”.

ANSWER OR IGNORE AN INCOMING CALL —

NO CALL CURRENTLY IN PROGRESS

When you receive a call on your mobile phone, the

Uconnect Phone will interrupt the vehicle audio

system. Push the Phone button on the steering

wheel, press the Answer button on the

touchscreen.

Uconnect 3 With 5-inch Display

1 — Answer
2 — Mute/Unmute
3 — Ignore
4 — Transfer

1 — Answer Button
2 — Caller ID Box

5

282

MULTIMEDIA

ANSWER OR IGNORE AN INCOMING CALL —

CALL CURRENTLY IN PROGRESS

If a call is currently in progress and you have

another incoming call, you will hear the same

network tones for call waiting that you normally

hear when using your mobile phone. Push the

Phone button on the steering wheel, press the

Answer button on the touchscreen, or press the

Caller ID box to place the current call on hold and

answer the incoming call.

NOTE:

Phones that are compatible with the Uconnect

system in the market today do not support

rejecting an incoming call when another call is in

progress. Therefore, the user can only answer an

incoming call or ignore it.

DO NOT DISTURB

With Do Not Disturb, you can disable notifications

from incoming calls and texts, allowing you to keep

your eyes on the road and hands on the wheel. For

your convenience, there is a counter display to

keep track of your missed calls and text messages

while Do Not Disturb is active.
Do Not Disturb can automatically reply with a text

message, a call, or both when declining an

incoming call and send it to voicemail.

Automatic reply messages can be:



“I am driving right now, I will get back to you

shortly”.



Create a custom auto reply message up to

160 characters.

NOTE:

Only the first 25 characters can be seen on the

touchscreen while typing a custom message.
While in Do Not Disturb, Conference Call can be

selected so you can still place a second call

without being interrupted by incoming calls.

NOTE:



Reply with text message is not compatible with

iPhone® devices.



Auto reply with text message is only available on

phones that support Bluetooth® Message

Access Profile (MAP).

PLACE/RETRIEVE A CALL FROM HOLD

During an active call, press the Hold or Call On Hold

button on the Phone main screen.

MAKING A SECOND CALL WHILE CURRENT

CALL IS IN PROGRESS

You can place a call on hold by pressing the Hold

button on the Phone main screen, then dial a

number from the keypad (if supported by your

mobile phone), recent calls, SMS Inbox or from the

phonebooks.

TOGGLING BETWEEN CALLS

Uconnect 3 With 5-inch Display

If two calls are in progress (one active and one on

hold), press the Swap Calls button on the phone

main screen. Only one call can be placed on hold

at a time.
You can also push the Phone button to toggle

between the active and held phone call.

JOIN CALLS

When two calls are in progress (one active and one

on hold), press the Join/Merge Calls button on the

Phone main screen to combine all calls into a

conference call.