Acura RLX HYBRID (2020 year). Manual in english — page 12

uu

Interior Lights/Interior Convenience Items

u

Interior Convenience Items

192

Co
ntrols

The tie-down anchors on the trunk floor can
be used to install a net for securing items.

The cargo hooks in the trunk can be used to
install a net for securing items.

■

Tie-down Anchors

1

Tie-down Anchors

Distribute cargo evenly on the floor of the trunk,
placing the heaviest items on the bottom and as far
forward as possible.

2

Maximum Load Limit

P. 375

Hook

■

Cargo Hooks

1

Cargo Hooks

Distribute cargo evenly on the floor of the trunk,
placing the heaviest items on the bottom and as far
forward as possible.

2

Maximum Load Limit

P. 375

Hook

Continued

193

uu

Interior Lights/Interior Convenience Items

u

Interior Convenience Items

Co
ntrols

In addition to the larger cargo area, the trunk
incorporates a small shelf above the High
Voltage (HV) battery module that can carry up
to 15 lbs (7 kg). Do not exceed this capacity.

The cargo net can be used to help hold down
items stored in the trunk.

In the event a flat tire, a tire repair kit is
provided beneath the trunk floor.

2

Temporarily Repairing a Flat Tire

P. 541

■

Cargo Area

1

Cargo Area

NOTICE

Heavy objects may damage the trunk shelf.
Make sure any items put on the shelf weigh less than
15 lbs (7 kg).

Tiered Storage Area

Cargo Net

U.S. models

Canadian models

uu

Interior Lights/Interior Convenience Items

u

Interior Convenience Items

194

Co
ntrols

The power mode must be in ON to use the
heated steering wheel.

Press the button on the left side of the
steering wheel.

When a comfortable temperature is reached,
press the button again to turn it off.

The heated steering wheel is turned off every
time you start the power system, even if you
turned it on the last time you drove the
vehicle.

■

Heated Steering Wheel

1

Heated Steering Wheel

Do not use the heated steering wheel continuously
when the power system is off. Under such conditions,
the 12-volt battery may be weakened, making the
power system difficult to start.

Continued

195

uu

Interior Lights/Interior Convenience Items

u

Interior Convenience Items

Co
ntrols

The power mode must be in ON to use the
seat heaters.

Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)

■

Front Seat Heaters

*

1

Front Seat Heaters

*

Do not use the seat heaters even in LO when the
power system is off. Under such conditions, the 12-
volt battery may be weakened, making the power
system difficult to start.

3

WARNING

Heat induced burns are possible when
using seat heaters.

Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.

* Not available on all models

uu

Interior Lights/Interior Convenience Items

u

Interior Convenience Items

196

Co
ntrols

The power mode must be in ON to use the
seat heaters and ventilation.

Press the seat heater or the seat ventilation
button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)

■

Front Seat Heaters and Ventilation

*

1

Front Seat Heaters and Ventilation

*

Do not use the seat heaters and the seat ventilation
even in LO when the power system is off. Under such
conditions, the 12-volt battery may be weakened,
making the power system difficult to start.

3

WARNING

Heat induced burns are possible when
using seat heaters.

Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.

* Not available on all models

Continued

197

uu

Interior Lights/Interior Convenience Items

u

Interior Convenience Items

Co
ntrols

The power mode must be in ON to use the
seat heaters.

There is no heater in the rear center seating
position.
Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)

To open the sunglasses holder, push and
release the indent. To close, push it again until
it latches.

You can store eyeglasses and other small
items in this holder.

■

Rear Seat Heaters

1

Rear Seat Heaters

Do not use the seat heaters even in LO when the
power system is off. Under such conditions, the 12-
volt battery may be weakened, making the power
system difficult to start.

3

WARNING

Heat induced burns are possible when
using seat heaters.

Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.

■

Sunglasses Holder

1

Sunglasses Holder

Keep the holder closed while driving except when
accessing stored items.

Push

uu

Interior Lights/Interior Convenience Items

u

Interior Convenience Items

198

Co
ntrols

The power rear sunshade can be operated with the power mode in ON.

To raise:

Press the button.

To lower:

Press the button again.

When the transmission is put into

(

R

, the rear

sunshade lowers automatically.

u

If the vehicle is travelling at 10 mph (15
km/h) or more, or if the transmission is
put into

(

P

, the sunshade returns to its

original position.

Even if the power mode is switched to OFF,
the sunshade can be operated for
approximately 1 minute.

■

Power Rear Sunshade

*

1

Power Rear Sunshade

*

If the sunshade stops while moving, check for and
clear any obstacles, then push the button again.

3

WARNING

Opening or closing the sunshade on
someone’s hands or fingers can cause
serious injury.

Make sure all hands and fingers are clear of
the sunshade before opening or closing it.

Front

Rear

* Not available on all models

199

uu

Interior Lights/Interior Convenience Items

u

Interior Convenience Items

Co
ntrols

Pull the tab and roll up the sunshade all the
way. Use the hooks to hang it.

■

Expanded Rear Door Sunshades

*

1

Expanded Rear Door Sunshades

*

Use the sunshades only when the windows are fully
closed. Using the shade while a window is open can
unhook and blow off the shade, hitting and possibly
hurting anyone sitting near the window.

Hook

Tab

* Not available on all models

200

Co
ntrols

Climate Control System

Using Automatic Climate Control

The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.

Use the system when the power system is on.

1.

Press the

AUTO

button.

2.

Adjust the interior temperature using the driver’s side or passenger’s side
temperature control switch.

3.

Press the

(on/off) button to cancel.

In addition to the button/switch operations, you can control the climate control
system from the On Demand Multi-Use Display

TM

touch screen.

1

Using Automatic Climate Control

If any buttons/icons on the touch screen are pressed
while using the climate control system in auto, the
function of the button/icon that was pressed will take
priority.
The AUTO indicator will go off, but functions
unrelated to the button/icon that was pressed will be
controlled automatically.

To prevent cold air from blowing in from outside, the
fan may operate at low speed for a while after the

AUTO

button has been pressed.

If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh mode to
recirculation mode until the temperature cools down.

When you set the temperature to the lower or upper
limit,

Lo

or

Hi

is displayed.

Pressing the

button switches the climate control

system between on and off. When turned on, the
system returns to your last selection.

When you unlock the doors with your remote, the driver’s
ID (

Driver 1

or

Driver 2

) is detected, and the climate

control settings are turned to the respective mode
automatically when you set the power mode to ON.

The High Voltage battery level being low may reduce
the climate control system performance.

(On/off) Button

AUTO

Button

On Demand Multi-Use Display

TM

Driver’s Side
Temperature
Control Switch

Passenger’s Side
Temperature
Control Switch

Passenger’s Side
Temperature

Driver’s Side
Temperature

Continued

201

uu

Climate Control System

u

Using Automatic Climate Control

Co
ntrols

■

Operating from the On Demand Multi-Use Display

TM

1

Using Automatic Climate Control

You can store two customized climate control
settings to the system and recall them from the On
Demand Multi-Use Display

TM

.

2

Shortcuts

P. 218

On Demand Multi-Use Display

TM

A/C

(Air Conditioning) and

SYNC

(Synchronized) Icon

Driver’s Side
Vent Mode Icon

Driver’s Side
Temperature Control
Icon

Recirculation/
Fresh Air mode
Icon

Passenger’s Side
Vent Mode Icon

Fan Control Icon

Passenger’s Side
Temperature Control
Icon

uu

Climate Control System

u

Using Automatic Climate Control

202

Co
ntrols

■

Changing the interior temperature setting

1.

Select the driver’s or passenger’s side
temperature control.

2.

Change the temperature setting from the
following:

Temperature bar

: Select a point where your

desired temperature setting is.
Farther to the left is for a lower, and to the
right for a higher setting.

3

/

4

: To raise or lower the temperature

setting one degree at a time.
While you select and hold

3

/

4

, the

temperature decreases or increases.

MAX COOL ON/OFF

: To rapidly cool down

the interior.

u

The AUTO indicator comes on. The
setting returns to the previously selected
value when you select it again.

MAX HEAT ON/OFF

: To rapidly warm up the

interior.

u

The AUTO indicator comes on. The
setting returns to the previously selected
value when you select it again.

1

Using Automatic Climate Control

When you set the temperature to the lower or upper
limit,

Lo

or

Hi

is displayed.

When you set the

MAX COOL

or

MAX HEAT

,

MAX

COOL

or

MAX HEAT

is displayed.

The side you selected.

Temperature Bar

Continued

203

uu

Climate Control System

u

Using Automatic Climate Control

Co
ntrols

■

Switching the vent mode

1.

Select the driver’s or passenger’s side vent
mode.

2.

Select a desired vent mode icon, or

Driver

Mode Auto

(driver’s side)/

Passenger

Mode Auto

(passenger’s side): The system

automatically selects the vent mode most
suitable to the ambient environment.

Vent mode

: Dashboard vents and back of the center

console

: Dashboard and floor vents, and back of

the center console

: Floor vents
: Floor and defroster vents (driver’s side

only)

■

A/C on and off

1.

Select

A/C

.

2.

Select

ON

or

OFF

.

1

Switching the vent mode

While the climate control system is in auto,

Driver

Mode Auto

or

Passenger Mode Auto

is

highlighted.

The side you selected.

uu

Climate Control System

u

Using Automatic Climate Control

204

Co
ntrols

■

SYNC on and off

1.

Select

SYNC

.

2.

Select

ON

for synchronization mode, and

OFF

for dual mode.

u

When in synchronization mode, the
passenger’s side temperature and vent
mode become the same as the driver’s
side settings.

3.

Adjust the temperature or change the
mode from the driver’s side.

■

Changing the fan speed

1.

Select .

2.

Change the fan speed with one of the
following:
The fan speed level indicators: Select your
desired speed level. The smaller indicator is
for a slower speed, and the larger for a
faster speed.

(

+

/

(

-

: To go up or down one level at a

time.

Fan AUTO

: The system automatically

selects the fan speed most suitable to the
ambient environment.

1

SYNC on and off

When you press the

button, the system changes

to synchronization mode.

When the system is in dual mode, the driver’s side
temperature and vent mode, and the passenger’s
side temperature and vent mode can be set
separately.

You can also return to dual mode by changing the
passenger’s side temperature or switching the vent mode.

The system adjusts each temperature based on the
information of the sunlight sensor and the sun
position updated by the navigation system’s GPS.

1

Changing the fan speed

While the climate control system is in auto,

Fan

AUTO

is highlighted.

Fan Speed Level Indicators

Continued

205

uu

Climate Control System

u

Using Automatic Climate Control

Co
ntrols

■

Switching between the recirculation and fresh air modes

1.

Select ,

or

currently

shown.

2.

Switch the mode depending on
environmental conditions to the following:

(recirculation mode): Recirculates air

from the vehicle’s interior through the system.

(auto mode): Automatically switch

between the recirculation and fresh air modes
most suitable to environmental conditions. If
the ambient temperature is low, the mode
may not change to recirculation to keep the
windows from fogging up.

(fresh air mode): Maintains outside

ventilation. Keep the system in fresh air mode
in normal situations.

1

Switching between the recirculation and fresh air modes

While the climate control system is in AUTO,

is

highlighted.

uu

Climate Control System

u

Using Automatic Climate Control

206

Co
ntrols

■

Shortcuts

You can store two sets of your preferred temperature, fan speed, and vent mode
settings to the climate control system.

To store a set of the climate control settings:

1.

Select

Shortcuts

.

2.

Adjust the climate control system to your
preference.

2

Climate Control System

P. 200

3.

Select

Climate

.

4.

Select

Edit

.

5.

Select

Add

.

6.

Select

Preset 1

or

Preset 2

you want to

store your settings to.

To recall one of the settings:

1.

Select

Shortcuts

.

2.

Select

Climate

.

3.

Select

Preset 1

or

Preset 2

.

To delete a preset:

1.

Select

Shortcuts

.

2.

Select

Climate

.

3.

Select

Edit

.

4.

Select

Delete

.

5.

Select

Preset 1

or

Preset 2

you want to

delete.

1

Shortcuts

You can also store a set by pressing and holding the
preset number you want to store that setting after
step 3.

Continued

207

uu

Climate Control System

u

Using Automatic Climate Control

Co
ntrols

Pressing the

button turns the air

conditioning system on and automatically
switches the system to fresh air mode.

Press the

button again to turn off, the

system returns to the previous settings.

■

To rapidly defrost the windows

1.

Press the

button.

2.

Select the recirculation mode.

2

Switching between the recirculation
and fresh air modes

P. 205

■

Defrosting the Windshield and Windows

1

Defrosting the Windshield and Windows

For your safety, make sure you have a clear view
through all the windows before driving.

Do not set the temperature near the upper or lower
limit.
When cold air hits the windshield, the outside of the
windshield may fog up.

If the side windows fog up, adjust the vents so that
the air hits the side windows.

1

To rapidly defrost the windows

After defrosting the windows, switch over to fresh air
mode.
If you keep the system in recirculation mode, the
windows may fog up from humidity. This impedes
visibility.