Acura CSX. Manual — part 227
10
11
12
Specified Torque:
8 x 1.25 mm
27 N·m (2.8 kgf·m, 20 lbf·ft)
13-136
Manual Transmission
Liquid gasket
A
C
B
6 x 1.0 mm
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
D
39 N·m
(4.0 kgf·m,
29 lbf·ft)
B
14. Tighten the 8 mm flange bolts in a crisscross
pattern in several steps.
15. Clean any dirt or oil from the mating surface of the
change lever assembly and the transmission
housing. Apply liquid gasket, P/N 08718-0001,
evenly to the mating surface of the change lever
assembly and the transmission housing. Install the
component within 5 minutes of applying the liquid
gasket.
NOTE:
• If you apply liquid gasket P/N 08718-0012, the
component must be installed within 4 minutes.
• If too much time has passed after applying the
liquid gasket, remove the old liquid gasket and
residue, then reapply new liquid gasket.
16. Install the 8 x 14 mm dowel pins (B) and the change
lever assembly (C) with harness bracket A.
17. Apply liquid gasket, P/N 08718-0001, evenly to the
threads of the inter lock bolt (D). Install the
component within 5 minutes of applying the liquid
gasket.
NOTE:
• If you apply liquid gasket P/N 08718-0012, the
component must be installed within 4 minutes.
• If too much time has passed after applying the
liquid gasket, remove the old liquid gasket and
residue, then reapply new liquid gasket.
08/08/21 14:48:44 61SNR030_130_0138
*08
*09
04
13-137
B
44 N·m
(4.5 kgf·m, 33 lbf·ft)
G
F
A
39 N·m
(4.0 kgf·m,
29 lbf·ft)
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
D
E
C
C
B
E
A
C
22 N·m
(2.2 kgf·m,
16 lbf·ft)
D
F
29 N·m (3.0 kgf·m, 22 lbf·ft)
10 x 1.25 mm
44 N·m
(4.5 kgf·m,
33 lbf·ft)
A
44 N·m
(4.5 kgf·m, 33 lbf·ft)
B
18. Install the drain plug (A) and the 10 mm flange bolt
(B) with new washers (C). Install the filler plug (D)
finger-tight with new sealing washer (E).
19. Apply MTF to a new O-ring (F). Then install the
output shaft (countershaft) speed sensor (G) with
the O-ring.
20. Install the steel balls (A), the springs (B), and the
detent bolts (C) with new washers (D).
21. Install the transmission hanger (E).
22. Apply liquid gasket, P/N 08718-0001 evenly to the
threads of the back-up light switch (F), and install it
on the transmission housing. Install the component
within 5 minutes of applying the liquid gasket.
NOTE:
• If you apply liquid gasket P/N 08718-0012, the
component must be installed within 4 minutes.
• If too much time has passed after applying the
liquid gasket, remove the old liquid gasket and
residue, then reapply new liquid gasket.
23. Install the 20 mm bolt (A) with new 20 mm sealing
washer (B).
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
08/08/21 14:48:45 61SNR030_130_0139
*01
SNR9AA9E34150339122KBAT00
13-138
Manual Transmission
Gearshift Mechanism Replacement
’06 model
’07-09 models
COTTER PINS
WASHER
(WHITE)
LOCK PINS
(P/N 08C30-B0234M)
SHIFT CABLE
CLIP
8 x 1.25 mm
27 N·m
(2.8 kgf·m, 20 lbf·ft)
SHIFT CABLE BRACKET
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
SHIFT CABLES
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
SHIFT LEVER HOUSING
SHIFT LEVER KNOB
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
SHIFT
CABLE
CLIP
A
A
LOCKNUT
10 x 1.25 mm
9 N·m
(0.9 kgf·m,
7 lbf·ft)
(P/N 08C30-B0234M)
WASHER
(WHITE)
WASHER
WASHER
NOTE:
• Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have
silicone grease on your hands or gloves.
• When installing the shift cables (transmission side), position the paint mark (A) facing the upward.
Replace.
Replace.
Replace.
08/08/21 14:48:45 61SNR030_130_0140
*01
SNR9AA9E34150700000DAAT00
13-139
M/T Differential
Component Location Index
CARRIER BEARING
FINAL DRIVEN GEAR
DIFFERENTIAL CARRIER
CARRIER BEARING
SHIM, 80 mm
OIL SEAL
OIL SEAL
Replacement, page 13-140
Replacement, page 13-140
Replacement, page 13-140
Replacement, page 13-140
Differential Thrust Clearance
Adjustment, page 13-142
Replacement, page 13-141
Replacement, page 13-141
08/08/21 14:48:56 61SNR030_130_0141
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст