Acura CSX. Manual — part 43
13
*02
15
16
M/T model
A/T model
6-25
10 x 1.25 mm
44 N·m
(4.5 kgf·m, 33 lbf·ft)
D
A
C
B
6 x 1.0 mm
10 N·m
(1.0 kgf·m, 7.2 lbf·ft)
A
A
21. Install the side engine mount bracket.
22. Install the side engine mount bracket (A), then
loosely tighten the new bolt and nut (B), and
loosely tighten the bolt (C).
23. Install the ground cable (D).
24. Remove the air cleaner assembly (see page 11-345).
25. Loosen the transmission mounting bolt and nuts
(A).
Replace.
17
18
19
6-26
Cylinder Head
A
A
12 x 1.25 mm
72 N·m
(7.3 kgf·m, 52 lbf·ft)
14 x 1.5 mm
74 N·m
(7.5 kgf·m, 54 lbf·ft)
26. Raise the vehicle on the lift.
27. Loosen the lower torque rod mounting bolt (A).
28. M/T model: Loosen the front mount mounting
bolt (A).
29. Lower the vehicle on the lift.
30. Tighten the side engine mount mounting bolts and
nut.
20
21
22
M/T model
A/T model
6-27
12 x 1.25 mm
74 N·m
(7.5 kgf·m, 54 lbf·ft)
12 x 1.25 mm
74 N·m
(7.5 kgf·m, 54 lbf·ft)
14 x 1.5 mm
93 N·m
(9.5 kgf·m, 69 lbf·ft)
31. Tighten the transmission mounting bolt and nuts.
32. Raise the vehicle on the lift.
33. Tighten the lower torque rod mounting bolt.
34. Lower the vehicle on the lift.
35. Install the air cleaner assembly (see page 11-345).
23
24
25
*03
M/T model
A/T model
6-28
Cylinder Head
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
C
B
A
36. Install the upper torque rod, then tighten the new
upper torque rod mounting bolts in the numbered
sequence shown.
37. Raise the vehicle on the lift.
38. M/T model: Tighten the front mount mounting bolt.
39. Install the splash shield (see step 40 on page 5-20).
40. Lower the vehicle on the lift.
41. Install the variable valve timing control (VTC) oil
control solenoid valve (see page 11-294).
42. Install the harness clamps (A), and connect the CKP
sensor connector (B) and the VTC oil control
solenoid valve connector (C).
43. Install the crankshaft pulley (see page 6-17).
44. Install the cylinder head cover (see page 6-37).
45. Install the drive belt (see page 4-31).
46. Do the CKP pattern clear/CKP learn procedure
(see page 11-4).
Replace.
Replace.
Replace.
Replace.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст