Acura CSX. Manual — part 35
04
01
02
SNR9A00A18224024895KBAT00
M/T model
A/T model
5-35
5-35
Side Engine Mount Bracket
Replacement
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
7. Raise the vehicle on the lift.
8. M/T model: Tighten the front mount mounting bolt.
9. Install the splash shield (see step 40 on page 5-20).
1. Support the engine with a jack and wood block
under the oil pan.
2. Remove the upper torque rod.
Replace.
Replace.
Replace.
Replace.
04
01
02
SNR9A00A18224024895KBAT00
M/T model
A/T model
5-35
5-35
Side Engine Mount Bracket
Replacement
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
7. Raise the vehicle on the lift.
8. M/T model: Tighten the front mount mounting bolt.
9. Install the splash shield (see step 40 on page 5-20).
1. Support the engine with a jack and wood block
under the oil pan.
2. Remove the upper torque rod.
Replace.
Replace.
Replace.
Replace.
*01
04
05
M/T model
A/T model
5-36
Engine Assembly
A
B
D
C
6 x 1.0 mm
10 N·m
(1.0 kgf·m, 7.2 lbf·ft)
A
A
3. Remove the ground cable (A), then remove the side
engine mount bracket (B).
4. Install the side engine mount bracket, then loosely
tighten the new bolt and nut (C), then loosely
tighten the bolt (D).
5. Install the ground cable.
6. Remove the air cleaner assembly (see page 11-345).
7. Loosen the transmission mounting bolt and nuts
(A).
Replace.
06
07
08
5-37
A
A
12 x 1.25 mm
72 N·m
(7.3 kgf·m, 52 lbf·ft)
14 x 1.5 mm
74 N·m
(7.5 kgf·m, 54 lbf·ft)
8. Raise the vehicle on the lift.
9. Remove the splash shield (see step 25 on page 5-5).
10. Loosen the lower torque rod mounting bolt (A).
11. M/T model: Loosen the front mount mounting
bolt (A).
12. Lower the vehicle on the lift.
13. Tighten the side engine mount mounting bolts and
nut.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст