Acura RLX (2018 year). Manual — part 6
87
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
High Beam
Indicator
• Comes on when the high beam
headlights are on.
—
—
Lights On
Indicator
●
Comes on whenever the light switch
is on, or in AUTO when the exterior
lights are on.
●
If you set the power mode to ACCESSORY
or VEHICLE OFF while the exterior lights are
on, a chime sounds when the driver’s door
is opened.
—
Auto-High Beam
Indicator
• Comes on for a few seconds when
you set the power mode to ON, then
goes off.
• Comes on when all the operating
conditions of the auto high-beam
are met.
2 Auto High-Beam P. 160
—
Fog Light
Indicator
*
• Comes on when the fog lights are
on.
—
—
Immobilizer
System Indicator
• Comes on briefly when you set the
power mode to ON, then goes off.
• Blinks if the immobilizer system
cannot recognize the key
information.
• Blinks - You cannot start the power
system. Set the power mode to VEHICLE
OFF, then select the ON mode again.
• Repeatedly blinks - The system may be
malfunctioning. Have your vehicle checked
by a dealer.
• Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
—
* Not available on all models
18 ACURA RLX E-AWD-31TY36400.book 87 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
88
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Security System
Alarm Indicator
●
Blinks when the security system
alarm has been set.
2 Security System Alarm P. 146
—
Keyless Access
System Indicator
●
Comes on for a few seconds when
you set the power mode to ON, then
goes off.
●
Comes on as soon as a problem is
detected in the keyless access system
or keyless starting system.
●
Have your vehicle checked by a dealer.
SPORT Mode
Indicator
●
Comes on for a few seconds when
you set the power mode to ON, then
goes off.
●
Comes on when you press the
SPORT button.
Indicator
18 ACURA RLX E-AWD-31TY36400.book 88 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
89
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Road Departure
Mitigation (RDM)
Indicator
●
Comes on for a few seconds when
you change the power mode to ON,
then goes off.
●
Comes on if there is a problem with
the RDM system.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Comes on when the RDM system
shuts itself off.
●
Stays on - The temperature inside the
camera is too high.
Use the climate control system to cool down
the camera.
The system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera P. 402
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
●
Have your vehicle checked by a dealer if the
indicator and message come back on after
you cleaned the area around the camera.
2 Front Sensor Camera P. 402
18 ACURA RLX E-AWD-31TY36400.book 89 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
90
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Adaptive Cruise
Control (ACC)
with Low Speed
Follow (LSF)
Indicator (Amber)
• Comes on for a few seconds when
you set the power mode to ON, then
goes off.
• Comes on if there is a problem with
ACC with LSF.
• Comes on while driving - Have your
vehicle checked by a dealer.
●
Comes on if anything covers the
radar sensor cover and prevents the
sensor from detecting a vehicle in
front.
●
May come on when driving in bad
weather (rain, snow, fog, etc.)
●
ACC with LSF has been automatically
canceled.
• When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt
using a soft cloth.
• Have your vehicle checked by a dealer if the
indicator does not go off even after you
clean the sensor cover.
Adaptive Cruise
Control (ACC)
with Low Speed
Follow (LSF)
Indicator (Green)
• Comes on when you press the MAIN
button.
2 Adaptive Cruise Control (ACC) with
—
18 ACURA RLX E-AWD-31TY36400.book 90 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
91
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Lane Keeping
Assist System
(LKAS) Indicator
(Amber)
• Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Comes on if there is a problem with
the LKAS.
●
Stays on constantly - Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
(LKAS) Indicator
(Green)
• Comes on when you press the MAIN
button.
2 Lane Keeping Assist System (LKAS)
P. 423
2 Traffic Jam Assist P. 430
—
18 ACURA RLX E-AWD-31TY36400.book 91 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
92
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Blind Spot
Information (BSI)
Indicator
• Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Stays on while BSI is turned off.
—
• Comes on when mud, snow, or ice
accumulates in the vicinity of sensor.
• Comes on while driving - Remove the
obstacle in the vicinity of sensor.
2 Blind spot information (BSI) System
P. 445
• Comes on if there is a problem with
the system.
• Comes on while driving - Have your
vehicle checked by a dealer.
Collision
Mitigation
Braking System
TM
(CMBS
TM
)
Indicator
• Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Comes on when you deactivate the
CMBS
TM
. A multi-information display
message appears for five seconds.
• Comes on if there is a problem with
the CMBS
TM
.
• Stays on constantly without the
CMBS
TM
off - Have your vehicle checked by
a dealer.
2 Collision Mitigation Braking System
18 ACURA RLX E-AWD-31TY36400.book 92 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
93
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Collision
Mitigation
Braking System
TM
(CMBS
TM
)
Indicator
• Comes on when the CMBS
TM
shuts
itself off.
• Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
2 Front Sensor Camera P. 402
• When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt
using a soft cloth.
• Have your vehicle checked by a dealer if the
indicator does not go off even after you
clean the sensor cover.
2 Collision Mitigation Braking System
• Stays on - The temperature inside the
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera P. 402
18 ACURA RLX E-AWD-31TY36400.book 93 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
94
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Multi-Information Display Warning and Information Messages
The following messages appear only on the multi-information display. Roll the right selector wheel to see the message again with the
system message indicator on.
Message
Condition
Explanation
• Appears when the vehicle is no longer able to run due
to its malfunction.
• Immediately stop in a safe place.
• Have your vehicle checked by a dealer immediately.
• Appears if you cannot select
(
P due to a malfunction.
• While the vehicle is stopped, apply the parking brake.
• Depending on the circumstances, you can set the
power system to ON as an emergency measure.
2 If the Transmission System Indicator Blinks along
with the Warning Message P. 573
• Have your vehicle checked by a dealer.
• Appears if the transmission is in a position other than
(
N and a malfunction is preventing the system from
starting.
• Depending on the circumstances, you can set the
power system to ON as an emergency measure.
2 If the Transmission System Indicator Blinks along
with the Warning Message P. 573
• Have your vehicle checked by a dealer.
• Appears when you set the power mode to ON again
and the vehicle is able to run.
2 Turning on the Power P. 380
18 ACURA RLX E-AWD-31TY36400.book 94 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
95
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the washer fluid is low.
• Refill the washer fluid.
2 Refilling Window Washer Fluid P. 514
• Appears if there is a problem with e-pretensioner
system.
• Have your vehicle checked by a dealer.
• Appears when the scheduled maintenance is due soon.
• Consequently, Maintenance Due Now and
Maintenance Past Due follow.
2 Maintenance Minder Messages on the Multi-
• Appears if the temperature of the transmission is too
high and the vehicle cannot drive normally.
• It may be difficult to accelerate or start uphill.
• Immediately stop in a safe place.
• Until the message goes off, allow the engine to idle so
that the transmission can cool down.
• Immediately after the message goes off, have your
vehicle checked by a dealer.
• Appears when you attempt to change to another gear
position with the transmission in
(
P and the power
system OFF.
• To select another gear position while in
(
P, the power
system must be ON.
18 ACURA RLX E-AWD-31TY36400.book 95 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
96
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with transmission and it is
not possible to select
(
R.
• Have your vehicle checked by a dealer.
• Appears if you depress the accelerator pedal when the
transmission is in
(
N.
• Release the accelerator pedal. After that, depress the
brake pedal and change the transmission position.
• Appears when you press and hold the
(
N button for
more than two seconds.
• Disappears when you set the gear position to other
than
(
N.
2 If you want to keep the transmission in
(
N
position (car wash mode) P. 391
• Appears when you change to
(
N, then release the
(
N
button.
2 If you want to keep the transmission in
(
N
position (car wash mode) P. 391
• All gear positions come on when the transmission is
operated.
• Acceleration is not possible while the indicator is on.
• Goes off a few seconds later if there is no problem.
• After the indicator goes off, you can drive normally.
18 ACURA RLX E-AWD-31TY36400.book 96 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
97
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when there is a problem with the sensor on the
12-volt battery.
●
Have your vehicle checked by a dealer.
2 Checking the 12-Volt Battery P. 530
●
Appears when the starter system has a problem.
●
As a temporary measure, press and hold the POWER
button for up to 15 seconds while depressing the brake
pedal and manually turn on the power system.
Have your vehicle checked by a dealer.
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Press the POWER button twice with your foot off the
brake pedal to change the power mode to VEHICLE
OFF.
●
Appears when the power mode is in ACCESSORY.
—
U.S.
Canada
18 ACURA RLX E-AWD-31TY36400.book 97 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
98
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when you close the door with the power mode
in ON without the keyless access remote inside the
vehicle.
●
Disappears when you bring the keyless access remote
back inside the vehicle and close the door.
2 Keyless Access Remote Reminder P. 154
●
Appears when the keyless access remote battery
becomes weak.
●
Replace the battery as soon as possible.
2 Replacing the Button Battery P. 531
●
Appears if the keyless access remote battery is too weak
to turn on the power system or the key is not within
operating range to turn on the power system.
A beeper sounds six times.
●
Bring the keyless access remote in front of the POWER
button to be touched with.
2 If the Keyless Access Remote Battery is Weak P. 562
●
Appears three seconds after you bring the keyless
access remote in front of the POWER button when To
Start, Hold Remote Near Start Button appears. To
Start Vehicle: Brake + Push appears sequentially.
●
Unless you bring the keyless access remote in front of
the POWER button, this message does not appear.
2 If the Keyless Access Remote Battery is Weak P. 562
●
Appears when you set the power mode to ACCESSORY
or ON.
2 Turning on the Power P. 380
●
Appears if you press the POWER button while the
vehicle is moving.
●
The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
18 ACURA RLX E-AWD-31TY36400.book 98 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
99
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you set the power mode to ON without
fastening the driver’s seat belt.
• Appears when you change the gear position after
(
P
has been automatically selected with the driver’s door
open, the driver’s seat belt unfastened, then the brake
pedal is released.
• Fasten the seat belt properly before you start to drive.
• Appears when you try to change the gear position
without depressing the brake pedal.
• Depress the brake pedal, then select a shift button.
• Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.
• Release your foot off the accelerator pedal, then select
a shift button.
• Appears when the parking button is pressed while the
vehicle is moving.
• Appears if you change the gear position to
(
R while the
vehicle is moving forward, or to
(
D while the vehicle is
reversing.
• Make sure that the vehicle comes to a stop before
operating the select button.
18 ACURA RLX E-AWD-31TY36400.book 99 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
100
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the electric system.
• Appears when you set the power mode to OFF while
driving.
• Immediately stop in a safe place and set the parking
brake.
• Continue driving if the message goes off soon after.
• If there is a problem with the transmission system, the
transmission system indicator comes on.
2 Transmission System Indicator P. 82
• Appears if you press the POWER button within five
seconds of putting the transmission into
(
N.
• The transmission remains in
(
N for 15 minutes, then
automatically switches to
(
P.
2 If you want to keep the transmission in
(
N
position (car wash mode) P. 391
• Appears if the vehicle is stopped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.
• When the vehicle is idling or when you are parking or
exiting the vehicle, put the transmission into
(
P before
releasing the brake pedal.
2 Shift Operation P. 389
• Appears if any door or the trunk is not completely
closed.
• Appears if any door or the trunk is opened while
driving. The beeper sounds.
• Goes off when all doors and the trunk are closed.
• Appears if there is a problem with the acoustic vehicle
alerting system.
• Have your vehicle checked by a dealer immediately.
18 ACURA RLX E-AWD-31TY36400.book 100 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
101
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the radiator system. • Drive slowly to prevent overheating and have your
vehicle checked by a dealer as soon as possible.
• Appears when there is a problem with the headlights.
• Appears while driving - The low beam headlights
may not be on. When conditions allow you to drive
safely, have your vehicle checked by a dealer as soon as
possible.
• Appears if there is a problem with the parking sensor
system.
• Check if the area around the sensor(s) is covered with
mud, ice, snow, etc. If the indicator(s) stays on even
after you clean the area, have the system checked by a
dealer.
• Appears if the automatic brake hold is automatically
canceled while it is in operation.
• Immediately depress the brake pedal.
• Appears when the automatic brake hold system is
turned off.
Models with
parking sensor
system
18 ACURA RLX E-AWD-31TY36400.book 101 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
102
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
• Fasten the driver’s seat belt.
• Appears when the automatic brake hold button is
pressed without depressing the brake pedal while the
automatic brake hold is in operation.
• Press the automatic brake hold button with the brake
pedal depressed.
• Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 456
2 Parking Brake P. 452
• Appears if there is a problem with the auto high-beam. • Manually operate the headlight switch.
• If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
• Appears when the area around the camera on the
windshield is blocked by dirt, mud, etc.
• Stop your vehicle in a safe place, and wipe it off with a
soft cloth.
• If the message does not disappear after cleaning the
lens, have your vehicle checked by a dealer.
18 ACURA RLX E-AWD-31TY36400.book 102 ページ 2017年7月20日 木曜日 午後6時8分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст