Acura RSX Honda Integra. Manual — part 379
04
S6M6A00J26273400000KDAT20
Special Tools Required
20-53
Trim Removal/Installation - Cargo Area
Fastener Locations
A
: Clip, 4
B
: Clip, 4
C
: Clip, 4
D
: Clip, 3
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
CARGO AREA REAR
TRIM PANEL
To body
LEFT CARGO AREA SIDE
TRIM PANEL
RIGHT CARGO AREA SIDE
TRIM PANEL
CARGO HOOK
REAR FLOOR
COVER
FASTENERS
(Four places)
CARGO FLOOR MAT
CARGO AREA FLOOR
REAR SIDE
TRIM PANEL
QUARTER PILLAR
TRIM
CARGO HOOK
KTC trim tool set SOJATP2014
NOTE:
• Put on gloves to protect your hands.
• Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
• Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown: To remove the trunk side trim panel, remove the rear side trim panel as necessary
(see page 20-51) and quarter pillar trim as necessary (see page 20-52).
2. Install the trim in the reverse order of removal, and note these items:
• Replace any damaged or stress-whitenings clips.
• Push the clips into place securely.
Pull back the mat to release
the fasteners from both
rear seat-backs.
05/06/27 18:23:08 61S6M040_200_0054
02
S6M6A00J26273400000KDAT12
Special Tools Required
20-54
Interior Trim
Trim Removal/Installation - Hatch Area
Fastener Locations
: Clip, 18
HATCH TRIM PANEL
HATCH SIDE TRIM
HOOKS
LID
REAR SHELF HOOK
REAR SHELF HOOKS
REAR SHELF
LEFT HATCH SIDE TRIM
HATCH TRIM PANEL
SCREWS
RIGHT HATCH SIDE TRIM
ET SCREW
5 x 0.8 mm
3.4 N·m
(0.35 kgf·m, 2.5 lbf·ft)
KTC trim tool set SOJATP2014
NOTE:
• Put on gloves to protect your hands.
• Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
• Take care not to bend or scratch the trim and panels.
1. Remove the trim in the sequence shown:
• Rear shelf
• Rear shelf hooks
• Right hatch side trim
• Left hatch side trim
• Hatch trim panel
2. Install the trim in the reverse order of removal, and note these items:
• Replace any damaged or stress-whitenings clips.
• If the threads on a pull pocket screw are worn out, use an oversized self-tapping ET screw (P/N 90137-S2G-003)
made specifically for this application.
• Push the clips into place securely.
05/06/27 18:23:09 61S6M040_200_0055
01
01
S6M6A00J26200031201KDAT00
Special Tools Required
20-55
Headliner Removal/Installation
Fastener Locations
: Screw, 4
B
A
C
5 x 0.8 mm
3.4 N·m
(0.35 kgf·m, 2.5 lbf·ft)
D
B
Fastener Locations
: Clip, 2
A
B
C
D
E
A
KTC trim tool set SOJATP2014
NOTE:
• Use the appropriate tool from the KTC trim tool set to
avoid damage when prying components.
• Take care not to bend and scratch the headliner.
• Be careful not to damage the dashboard and other
interior trim pieces.
1. Remove these items:
• A-pillar trim, both sides (see page 20-50)
• Front seat belt upper anchor, both sides (see step
6 on page 23-4)
• Rearview mirror (see page 20-18)
• Spotlights with moonroof (see page 22-107)
• Ceiling light (see page 22-107)
2. Remove the sunvisor (A) and holder (B) from both
sides.
–1 Remove the caps (C).
–2 Remove the self-tapping ET screws.
–3 Remove the sunvisor from the body and holder.
–4 Using a flat-tip screwdriver, push the hook (D),
and turn the holder 90 °, then pull it out.
3. Pull the door opening trim (A) away from the roof
on both sides, and then release the upper portions
of the quarter pillar trim pieces (B) from both sides
(see page 20-52).
4. With moonroof: Remove the socket plug (C) and
roof trim (D).
5. With the help of an assistant, detach the rear clips
by pulling the rear portion of the headliner (E)
down.
(cont’d)
05/06/27 18:23:09 61S6M040_200_0056
03
02
01
20-56
Interior Trim
Headliner Removal/Installation (cont’d)
B
A
A
A
B
Fastener Locations
: Cushion tape, 3
Fastener Locations
: Clip, 2
B
A
C
: Clip, 1
C
B
B
(White)
(Black)
6. With the help of an assistant, hold the tops of the
quarter pillar trim pieces (A) away from the roof,
and work the headliner (B) free in the sequence
shown.
7. Without moonroof: Remove the cushion tapes,
then remove the interior harness (A) from the
headliner (B).
8. Remove the headliner through the hatch opening.
9. Release the roof side pad (A) from the clips (B, C)
by sliding it rearward, then remove it.
05/06/27 18:23:10 61S6M040_200_0057
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст